BladeRF library compiles

1 files changed, 133 insertions, 0 deletions

diff --git a/Radio/HW/BladeRF/firmware_common/bladeRF.h b/Radio/HW/BladeRF/firmware_common/bladeRF.h
new file mode 100644
index 0000000..bfc8c0f
--- /dev/null
+++ b/Radio/HW/BladeRF/firmware_common/bladeRF.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013 Nuand LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef _BLADERF_FIRMWARE_COMMON_H_
+#define _BLADERF_FIRMWARE_COMMON_H_
+
+#define BLADE_USB_CMD_QUERY_VERSION             0
+#define BLADE_USB_CMD_QUERY_FPGA_STATUS         1
+#define BLADE_USB_CMD_BEGIN_PROG                2
+#define BLADE_USB_CMD_END_PROG                  3
+#define BLADE_USB_CMD_RF_RX                     4
+#define BLADE_USB_CMD_RF_TX                     5
+#define BLADE_USB_CMD_QUERY_DEVICE_READY        6
+#define BLADE_USB_CMD_QUERY_FLASH_ID            7
+#define BLADE_USB_CMD_QUERY_FPGA_SOURCE         8
+#define BLADE_USB_CMD_FLASH_READ              100
+#define BLADE_USB_CMD_FLASH_WRITE             101
+#define BLADE_USB_CMD_FLASH_ERASE             102
+#define BLADE_USB_CMD_READ_OTP                103
+#define BLADE_USB_CMD_WRITE_OTP               104
+#define BLADE_USB_CMD_RESET                   105
+#define BLADE_USB_CMD_JUMP_TO_BOOTLOADER      106
+#define BLADE_USB_CMD_READ_PAGE_BUFFER        107
+#define BLADE_USB_CMD_WRITE_PAGE_BUFFER       108
+#define BLADE_USB_CMD_LOCK_OTP                109
+#define BLADE_USB_CMD_READ_CAL_CACHE          110
+#define BLADE_USB_CMD_INVALIDATE_CAL_CACHE    111
+#define BLADE_USB_CMD_REFRESH_CAL_CACHE       112
+#define BLADE_USB_CMD_SET_LOOPBACK            113
+#define BLADE_USB_CMD_GET_LOOPBACK            114
+#define BLADE_USB_CMD_READ_LOG_ENTRY          115
+
+/* String descriptor indices */
+#define BLADE_USB_STR_INDEX_MFR     1   /* Manufacturer */
+#define BLADE_USB_STR_INDEX_PRODUCT 2   /* Product */
+#define BLADE_USB_STR_INDEX_SERIAL  3   /* Serial number */
+#define BLADE_USB_STR_INDEX_FW_VER  4   /* Firmware version */
+
+#define CAL_BUFFER_SIZE 256
+#define CAL_PAGE 768
+
+#define AUTOLOAD_BUFFER_SIZE 256
+#define AUTOLOAD_PAGE 1024
+
+#ifdef _MSC_VER
+#   define PACK(decl_to_pack_) \
+            __pragma(pack(push,1)) \
+            decl_to_pack_ \
+            __pragma(pack(pop))
+#elif defined(__GNUC__)
+#   define PACK(decl_to_pack_) \
+            decl_to_pack_ __attribute__((__packed__))
+#else
+#error "Unexpected compiler/environment"
+#endif
+
+PACK(
+struct bladerf_fx3_version {
+    unsigned short major;
+    unsigned short minor;
+});
+
+struct bladeRF_firmware {
+    unsigned int len;
+    unsigned char *ptr;
+};
+
+struct bladeRF_sector {
+    unsigned int idx;
+    unsigned int len;
+    unsigned char *ptr;
+};
+
+/**
+ * FPGA configuration source
+ * 
+ * Note: the numbering of this enum must match bladerf_fpga_source in
+ * libbladeRF.h
+ */
+typedef enum {
+    NUAND_FPGA_CONFIG_SOURCE_INVALID = 0, /**< Uninitialized/invalid */
+    NUAND_FPGA_CONFIG_SOURCE_FLASH   = 1, /**< Last FPGA load was from flash */
+    NUAND_FPGA_CONFIG_SOURCE_HOST    = 2  /**< Last FPGA load was from host */
+} NuandFpgaConfigSource;
+
+#define USB_CYPRESS_VENDOR_ID   0x04b4
+#define USB_FX3_PRODUCT_ID      0x00f3
+
+#define BLADE_USB_TYPE_OUT      0x40
+#define BLADE_USB_TYPE_IN       0xC0
+#define BLADE_USB_TIMEOUT_MS    1000
+
+#define USB_NUAND_VENDOR_ID                         0x2cf0
+#define USB_NUAND_BLADERF_PRODUCT_ID                0x5246
+#define USB_NUAND_BLADERF_BOOT_PRODUCT_ID           0x5247
+#define USB_NUAND_BLADERF2_PRODUCT_ID               0x5250
+
+#define USB_NUAND_LEGACY_VENDOR_ID                  0x1d50
+#define USB_NUAND_BLADERF_LEGACY_PRODUCT_ID         0x6066
+#define USB_NUAND_BLADERF_LEGACY_BOOT_PRODUCT_ID    0x6080
+
+#define USB_NUAND_BLADERF_MINOR_BASE 193
+#define NUM_CONCURRENT  8
+#define NUM_DATA_URB    (1024)
+#define DATA_BUF_SZ     (1024*4)
+
+
+/* Interface numbers */
+#define USB_IF_LEGACY_CONFIG    0
+#define USB_IF_NULL             0
+#define USB_IF_RF_LINK          1
+#define USB_IF_SPI_FLASH        2
+#define USB_IF_CONFIG           3
+
+#endif /* _BLADERF_FIRMWARE_COMMON_H_ */