rtlsdr library example compiles

19 files changed, 6926 insertions, 0 deletions

diff --git a/Radio/HW/RtlSdr/r820/include/reg_field.h b/Radio/HW/RtlSdr/r820/include/reg_field.h
new file mode 100644
index 0000000..18a6922
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/reg_field.h
@@ -0,0 +1,60 @@
+#ifndef _REG_FIELD_H
+#define _REG_FIELD_H
+
+#include <stdint.h>
+#include <stdarg.h>
+
+enum cmd_op {
+	CMD_OP_GET	= (1 << 0),
+	CMD_OP_SET	= (1 << 1),
+	CMD_OP_EXEC	= (1 << 2),
+};
+
+enum pstate {
+	ST_IN_CMD,
+	ST_IN_ARG,
+};
+
+struct strbuf {
+	uint8_t idx;
+	char buf[32];
+};
+
+struct cmd_state {
+	struct strbuf cmd;
+	struct strbuf arg;
+	enum pstate state;
+	void (*out)(const char *format, va_list ap);
+};
+
+struct cmd {
+	const char *cmd;
+	uint32_t ops;
+	int (*cb)(struct cmd_state *cs, enum cmd_op op, const char *cmd,
+		  int argc, char **argv);
+	const char *help;
+};
+
+/* structure describing a field in a register */
+struct reg_field {
+	uint8_t reg;
+	uint8_t shift;
+	uint8_t width;
+};
+
+struct reg_field_ops {
+	const struct reg_field *fields;
+	const char **field_names;
+	uint32_t num_fields;
+	void *data;
+	int (*write_cb)(void *data, uint32_t reg, uint32_t val);
+	uint32_t (*read_cb)(void *data, uint32_t reg);
+};
+
+uint32_t reg_field_read(struct reg_field_ops *ops, struct reg_field *field);
+int reg_field_write(struct reg_field_ops *ops, struct reg_field *field, uint32_t val);
+int reg_field_cmd(struct cmd_state *cs, enum cmd_op op,
+		  const char *cmd, int argc, char **argv,
+		  struct reg_field_ops *ops);
+
+#endif
diff --git a/Radio/HW/RtlSdr/r820/include/rtl-sdr.h b/Radio/HW/RtlSdr/r820/include/rtl-sdr.h
new file mode 100644
index 0000000..44f2d59
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/rtl-sdr.h
@@ -0,0 +1,408 @@
+/*
+ * rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver
+ * Copyright (C) 2012-2013 by Steve Markgraf <steve@steve-m.de>
+ * Copyright (C) 2012 by Dimitri Stolnikov <horiz0n@gmx.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __RTL_SDR_H
+#define __RTL_SDR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rtl-sdr_export.h>
+
+typedef struct rtlsdr_dev rtlsdr_dev_t;
+
+RTLSDR_API uint32_t rtlsdr_get_device_count(void);
+//uint32_t rtlsdr_get_device_count(void);
+
+RTLSDR_API const char* rtlsdr_get_device_name(uint32_t index);
+
+/*!
+ * Get USB device strings.
+ *
+ * NOTE: The string arguments must provide space for up to 256 bytes.
+ *
+ * \param index the device index
+ * \param manufact manufacturer name, may be NULL
+ * \param product product name, may be NULL
+ * \param serial serial number, may be NULL
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_get_device_usb_strings(uint32_t index,
+					     char *manufact,
+					     char *product,
+					     char *serial);
+
+/*!
+ * Get device index by USB serial string descriptor.
+ *
+ * \param serial serial string of the device
+ * \return device index of first device where the name matched
+ * \return -1 if name is NULL
+ * \return -2 if no devices were found at all
+ * \return -3 if devices were found, but none with matching name
+ */
+RTLSDR_API int rtlsdr_get_index_by_serial(const char *serial);
+
+RTLSDR_API int rtlsdr_open(rtlsdr_dev_t **dev, uint32_t index);
+
+RTLSDR_API int rtlsdr_close(rtlsdr_dev_t *dev);
+
+/* configuration functions */
+
+/*!
+ * Set crystal oscillator frequencies used for the RTL2832 and the tuner IC.
+ *
+ * Usually both ICs use the same clock. Changing the clock may make sense if
+ * you are applying an external clock to the tuner or to compensate the
+ * frequency (and samplerate) error caused by the original (cheap) crystal.
+ *
+ * NOTE: Call this function only if you fully understand the implications.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param rtl_freq frequency value used to clock the RTL2832 in Hz
+ * \param tuner_freq frequency value used to clock the tuner IC in Hz
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_xtal_freq(rtlsdr_dev_t *dev, uint32_t rtl_freq,
+				    uint32_t tuner_freq);
+
+/*!
+ * Get crystal oscillator frequencies used for the RTL2832 and the tuner IC.
+ *
+ * Usually both ICs use the same clock.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param rtl_freq frequency value used to clock the RTL2832 in Hz
+ * \param tuner_freq frequency value used to clock the tuner IC in Hz
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_get_xtal_freq(rtlsdr_dev_t *dev, uint32_t *rtl_freq,
+				    uint32_t *tuner_freq);
+
+/*!
+ * Get USB device strings.
+ *
+ * NOTE: The string arguments must provide space for up to 256 bytes.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param manufact manufacturer name, may be NULL
+ * \param product product name, may be NULL
+ * \param serial serial number, may be NULL
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_get_usb_strings(rtlsdr_dev_t *dev, char *manufact,
+				      char *product, char *serial);
+
+/*!
+ * Write the device EEPROM
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param data buffer of data to be written
+ * \param offset address where the data should be written
+ * \param len length of the data
+ * \return 0 on success
+ * \return -1 if device handle is invalid
+ * \return -2 if EEPROM size is exceeded
+ * \return -3 if no EEPROM was found
+ */
+
+RTLSDR_API int rtlsdr_write_eeprom(rtlsdr_dev_t *dev, uint8_t *data,
+				  uint8_t offset, uint16_t len);
+
+/*!
+ * Read the device EEPROM
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param data buffer where the data should be written
+ * \param offset address where the data should be read from
+ * \param len length of the data
+ * \return 0 on success
+ * \return -1 if device handle is invalid
+ * \return -2 if EEPROM size is exceeded
+ * \return -3 if no EEPROM was found
+ */
+
+RTLSDR_API int rtlsdr_read_eeprom(rtlsdr_dev_t *dev, uint8_t *data,
+				  uint8_t offset, uint16_t len);
+
+RTLSDR_API int rtlsdr_set_center_freq(rtlsdr_dev_t *dev, uint32_t freq);
+
+/*!
+ * Get actual frequency the device is tuned to.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return 0 on error, frequency in Hz otherwise
+ */
+RTLSDR_API uint32_t rtlsdr_get_center_freq(rtlsdr_dev_t *dev);
+
+/*!
+ * Set the frequency correction value for the device.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param ppm correction value in parts per million (ppm)
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_freq_correction(rtlsdr_dev_t *dev, int ppm);
+
+/*!
+ * Get actual frequency correction value of the device.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return correction value in parts per million (ppm)
+ */
+RTLSDR_API int rtlsdr_get_freq_correction(rtlsdr_dev_t *dev);
+
+enum rtlsdr_tuner {
+	RTLSDR_TUNER_UNKNOWN = 0,
+	RTLSDR_TUNER_E4000,
+	RTLSDR_TUNER_FC0012,
+	RTLSDR_TUNER_FC0013,
+	RTLSDR_TUNER_FC2580,
+	RTLSDR_TUNER_R820T,
+	RTLSDR_TUNER_R828D
+};
+
+/*!
+ * Get the tuner type.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return RTLSDR_TUNER_UNKNOWN on error, tuner type otherwise
+ */
+RTLSDR_API enum rtlsdr_tuner rtlsdr_get_tuner_type(rtlsdr_dev_t *dev);
+
+/*!
+ * Get a list of gains supported by the tuner.
+ *
+ * NOTE: The gains argument must be preallocated by the caller. If NULL is
+ * being given instead, the number of available gain values will be returned.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param gains array of gain values. In tenths of a dB, 115 means 11.5 dB.
+ * \return <= 0 on error, number of available (returned) gain values otherwise
+ */
+RTLSDR_API int rtlsdr_get_tuner_gains(rtlsdr_dev_t *dev, int *gains);
+
+/*!
+ * Set the gain for the device.
+ * Manual gain mode must be enabled for this to work.
+ *
+ * Valid gain values (in tenths of a dB) for the E4000 tuner:
+ * -10, 15, 40, 65, 90, 115, 140, 165, 190,
+ * 215, 240, 290, 340, 420, 430, 450, 470, 490
+ *
+ * Valid gain values may be queried with \ref rtlsdr_get_tuner_gains function.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param gain in tenths of a dB, 115 means 11.5 dB.
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_tuner_gain(rtlsdr_dev_t *dev, int gain);
+
+/*!
+ * Set the bandwidth for the device.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param bw bandwidth in Hz. Zero means automatic BW selection.
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_tuner_bandwidth(rtlsdr_dev_t *dev, uint32_t bw);
+
+/*!
+ * Get actual gain the device is configured to.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return 0 on error, gain in tenths of a dB, 115 means 11.5 dB.
+ */
+RTLSDR_API int rtlsdr_get_tuner_gain(rtlsdr_dev_t *dev);
+
+/*!
+ * Set the intermediate frequency gain for the device.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param stage intermediate frequency gain stage number (1 to 6 for E4000)
+ * \param gain in tenths of a dB, -30 means -3.0 dB.
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_tuner_if_gain(rtlsdr_dev_t *dev, int stage, int gain);
+
+/*!
+ * Set the gain mode (automatic/manual) for the device.
+ * Manual gain mode must be enabled for the gain setter function to work.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param manual gain mode, 1 means manual gain mode shall be enabled.
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_tuner_gain_mode(rtlsdr_dev_t *dev, int manual);
+
+/*!
+ * Set the sample rate for the device, also selects the baseband filters
+ * according to the requested sample rate for tuners where this is possible.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param rate the sample rate to be set, possible values are:
+ * 		    225001 - 300000 Hz
+ * 		    900001 - 3200000 Hz
+ * 		    sample loss is to be expected for rates > 2400000
+ * \return 0 on success, -EINVAL on invalid rate
+ */
+RTLSDR_API int rtlsdr_set_sample_rate(rtlsdr_dev_t *dev, uint32_t rate);
+
+/*!
+ * Get actual sample rate the device is configured to.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return 0 on error, sample rate in Hz otherwise
+ */
+RTLSDR_API uint32_t rtlsdr_get_sample_rate(rtlsdr_dev_t *dev);
+
+/*!
+ * Enable test mode that returns an 8 bit counter instead of the samples.
+ * The counter is generated inside the RTL2832.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param on mode, 1 means enabled, 0 disabled
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_testmode(rtlsdr_dev_t *dev, int on);
+
+/*!
+ * Enable or disable the internal digital AGC of the RTL2832.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param on AGC mode, 1 means enabled, 0 disabled
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_agc_mode(rtlsdr_dev_t *dev, int on);
+
+/*!
+ * Enable or disable the direct sampling mode. When enabled, the IF mode
+ * of the RTL2832 is activated, and rtlsdr_set_center_freq() will control
+ * the IF-frequency of the DDC, which can be used to tune from 0 to 28.8 MHz
+ * (xtal frequency of the RTL2832).
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param on 0 means disabled, 1 I-ADC input enabled, 2 Q-ADC input enabled
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_direct_sampling(rtlsdr_dev_t *dev, int on);
+
+/*!
+ * Get state of the direct sampling mode
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return -1 on error, 0 means disabled, 1 I-ADC input enabled
+ *	    2 Q-ADC input enabled
+ */
+RTLSDR_API int rtlsdr_get_direct_sampling(rtlsdr_dev_t *dev);
+
+/*!
+ * Enable or disable offset tuning for zero-IF tuners, which allows to avoid
+ * problems caused by the DC offset of the ADCs and 1/f noise.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param on 0 means disabled, 1 enabled
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_set_offset_tuning(rtlsdr_dev_t *dev, int on);
+
+/*!
+ * Get state of the offset tuning mode
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return -1 on error, 0 means disabled, 1 enabled
+ */
+RTLSDR_API int rtlsdr_get_offset_tuning(rtlsdr_dev_t *dev);
+
+/* streaming functions */
+
+RTLSDR_API int rtlsdr_reset_buffer(rtlsdr_dev_t *dev);
+
+RTLSDR_API int rtlsdr_read_sync(rtlsdr_dev_t *dev, void *buf, int len, int *n_read);
+
+typedef void(*rtlsdr_read_async_cb_t)(unsigned char *buf, uint32_t len, void *ctx);
+
+/*!
+ * Read samples from the device asynchronously. This function will block until
+ * it is being canceled using rtlsdr_cancel_async()
+ *
+ * NOTE: This function is deprecated and is subject for removal.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param cb callback function to return received samples
+ * \param ctx user specific context to pass via the callback function
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_wait_async(rtlsdr_dev_t *dev, rtlsdr_read_async_cb_t cb, void *ctx);
+
+/*!
+ * Read samples from the device asynchronously. This function will block until
+ * it is being canceled using rtlsdr_cancel_async()
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param cb callback function to return received samples
+ * \param ctx user specific context to pass via the callback function
+ * \param buf_num optional buffer count, buf_num * buf_len = overall buffer size
+ *		  set to 0 for default buffer count (15)
+ * \param buf_len optional buffer length, must be multiple of 512,
+ *		  should be a multiple of 16384 (URB size), set to 0
+ *		  for default buffer length (16 * 32 * 512)
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_read_async(rtlsdr_dev_t *dev,
+				 rtlsdr_read_async_cb_t cb,
+				 void *ctx,
+				 uint32_t buf_num,
+				 uint32_t buf_len);
+
+/*!
+ * Cancel all pending asynchronous operations on the device.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \return 0 on success
+ */
+RTLSDR_API int rtlsdr_cancel_async(rtlsdr_dev_t *dev);
+
+/*!
+ * Enable or disable the bias tee on GPIO PIN 0.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param on  1 for Bias T on. 0 for Bias T off.
+ * \return -1 if device is not initialized. 0 otherwise.
+ */
+RTLSDR_API int rtlsdr_set_bias_tee(rtlsdr_dev_t *dev, int on);
+
+/*!
+ * Enable or disable the bias tee on the given GPIO pin.
+ *
+ * \param dev the device handle given by rtlsdr_open()
+ * \param gpio the gpio pin to configure as a Bias T control.
+ * \param on  1 for Bias T on. 0 for Bias T off.
+ * \return -1 if device is not initialized. 0 otherwise.
+ */
+RTLSDR_API int rtlsdr_set_bias_tee_gpio(rtlsdr_dev_t *dev, int gpio, int on);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __RTL_SDR_H */
diff --git a/Radio/HW/RtlSdr/r820/include/rtl-sdr_export.h b/Radio/HW/RtlSdr/r820/include/rtl-sdr_export.h
new file mode 100644
index 0000000..69e178d
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/rtl-sdr_export.h
@@ -0,0 +1,47 @@
+/*
+ * rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver
+ * Copyright (C) 2012 by Hoernchen <la@tfc-server.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef RTLSDR_EXPORT_H
+#define RTLSDR_EXPORT_H
+
+#if defined __GNUC__
+#  if __GNUC__ >= 4
+#    define __SDR_EXPORT   __attribute__((visibility("default")))
+#    define __SDR_IMPORT   __attribute__((visibility("default")))
+#  else
+#    define __SDR_EXPORT
+#    define __SDR_IMPORT
+#  endif
+#elif _MSC_VER
+#  define __SDR_EXPORT     __declspec(dllexport)
+#  define __SDR_IMPORT     __declspec(dllimport)
+#else
+#  define __SDR_EXPORT
+#  define __SDR_IMPORT
+#endif
+
+#ifndef rtlsdr_STATIC
+#	ifdef rtlsdr_EXPORTS
+#	define RTLSDR_API __SDR_EXPORT
+#	else
+#	define RTLSDR_API __SDR_IMPORT
+#	endif
+#else
+#define RTLSDR_API
+#endif
+#endif /* RTLSDR_EXPORT_H */
diff --git a/Radio/HW/RtlSdr/r820/include/rtlsdr_i2c.h b/Radio/HW/RtlSdr/r820/include/rtlsdr_i2c.h
new file mode 100644
index 0000000..7676689
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/rtlsdr_i2c.h
@@ -0,0 +1,8 @@
+#ifndef __I2C_H
+#define __I2C_H
+
+uint32_t rtlsdr_get_tuner_clock(void *dev);
+int rtlsdr_i2c_write_fn(void *dev, uint8_t addr, uint8_t *buf, int len);
+int rtlsdr_i2c_read_fn(void *dev, uint8_t addr, uint8_t *buf, int len);
+
+#endif
diff --git a/Radio/HW/RtlSdr/r820/include/tuner_e4k.h b/Radio/HW/RtlSdr/r820/include/tuner_e4k.h
new file mode 100644
index 0000000..79591ce
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/tuner_e4k.h
@@ -0,0 +1,222 @@
+#ifndef _E4K_TUNER_H
+#define _E4K_TUNER_H
+
+/*
+ * Elonics E4000 tuner driver
+ *
+ * (C) 2011-2012 by Harald Welte <laforge@gnumonks.org>
+ * (C) 2012 by Sylvain Munaut <tnt@246tNt.com>
+ * (C) 2012 by Hoernchen <la@tfc-server.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define E4K_I2C_ADDR	0xc8
+#define E4K_CHECK_ADDR	0x02
+#define E4K_CHECK_VAL	0x40
+
+enum e4k_reg {
+	E4K_REG_MASTER1		= 0x00,
+	E4K_REG_MASTER2		= 0x01,
+	E4K_REG_MASTER3		= 0x02,
+	E4K_REG_MASTER4		= 0x03,
+	E4K_REG_MASTER5		= 0x04,
+	E4K_REG_CLK_INP		= 0x05,
+	E4K_REG_REF_CLK		= 0x06,
+	E4K_REG_SYNTH1		= 0x07,
+	E4K_REG_SYNTH2		= 0x08,
+	E4K_REG_SYNTH3		= 0x09,
+	E4K_REG_SYNTH4		= 0x0a,
+	E4K_REG_SYNTH5		= 0x0b,
+	E4K_REG_SYNTH6		= 0x0c,
+	E4K_REG_SYNTH7		= 0x0d,
+	E4K_REG_SYNTH8		= 0x0e,
+	E4K_REG_SYNTH9		= 0x0f,
+	E4K_REG_FILT1		= 0x10,
+	E4K_REG_FILT2		= 0x11,
+	E4K_REG_FILT3		= 0x12,
+	// gap
+	E4K_REG_GAIN1		= 0x14,
+	E4K_REG_GAIN2		= 0x15,
+	E4K_REG_GAIN3		= 0x16,
+	E4K_REG_GAIN4		= 0x17,
+	// gap
+	E4K_REG_AGC1		= 0x1a,
+	E4K_REG_AGC2		= 0x1b,
+	E4K_REG_AGC3		= 0x1c,
+	E4K_REG_AGC4		= 0x1d,
+	E4K_REG_AGC5		= 0x1e,
+	E4K_REG_AGC6		= 0x1f,
+	E4K_REG_AGC7		= 0x20,
+	E4K_REG_AGC8		= 0x21,
+	// gap
+	E4K_REG_AGC11		= 0x24,
+	E4K_REG_AGC12		= 0x25,
+	// gap
+	E4K_REG_DC1		= 0x29,
+	E4K_REG_DC2		= 0x2a,
+	E4K_REG_DC3		= 0x2b,
+	E4K_REG_DC4		= 0x2c,
+	E4K_REG_DC5		= 0x2d,
+	E4K_REG_DC6		= 0x2e,
+	E4K_REG_DC7		= 0x2f,
+	E4K_REG_DC8		= 0x30,
+	// gap
+	E4K_REG_QLUT0		= 0x50,
+	E4K_REG_QLUT1		= 0x51,
+	E4K_REG_QLUT2		= 0x52,
+	E4K_REG_QLUT3		= 0x53,
+	// gap
+	E4K_REG_ILUT0		= 0x60,
+	E4K_REG_ILUT1		= 0x61,
+	E4K_REG_ILUT2		= 0x62,
+	E4K_REG_ILUT3		= 0x63,
+	// gap
+	E4K_REG_DCTIME1		= 0x70,
+	E4K_REG_DCTIME2		= 0x71,
+	E4K_REG_DCTIME3		= 0x72,
+	E4K_REG_DCTIME4		= 0x73,
+	E4K_REG_PWM1		= 0x74,
+	E4K_REG_PWM2		= 0x75,
+	E4K_REG_PWM3		= 0x76,
+	E4K_REG_PWM4		= 0x77,
+	E4K_REG_BIAS		= 0x78,
+	E4K_REG_CLKOUT_PWDN	= 0x7a,
+	E4K_REG_CHFILT_CALIB	= 0x7b,
+	E4K_REG_I2C_REG_ADDR	= 0x7d,
+	// FIXME
+};
+
+#define E4K_MASTER1_RESET	(1 << 0)
+#define E4K_MASTER1_NORM_STBY	(1 << 1)
+#define E4K_MASTER1_POR_DET	(1 << 2)
+
+#define E4K_SYNTH1_PLL_LOCK	(1 << 0)
+#define E4K_SYNTH1_BAND_SHIF	1
+
+#define E4K_SYNTH7_3PHASE_EN	(1 << 3)
+
+#define E4K_SYNTH8_VCOCAL_UPD	(1 << 2)
+
+#define E4K_FILT3_DISABLE	(1 << 5)
+
+#define E4K_AGC1_LIN_MODE	(1 << 4)
+#define E4K_AGC1_LNA_UPDATE	(1 << 5)
+#define E4K_AGC1_LNA_G_LOW	(1 << 6)
+#define E4K_AGC1_LNA_G_HIGH	(1 << 7)
+
+#define E4K_AGC6_LNA_CAL_REQ	(1 << 4)
+
+#define E4K_AGC7_MIX_GAIN_AUTO	(1 << 0)
+#define E4K_AGC7_GAIN_STEP_5dB	(1 << 5)
+
+#define E4K_AGC8_SENS_LIN_AUTO	(1 << 0)
+
+#define E4K_AGC11_LNA_GAIN_ENH	(1 << 0)
+
+#define E4K_DC1_CAL_REQ		(1 << 0)
+
+#define E4K_DC5_I_LUT_EN	(1 << 0)
+#define E4K_DC5_Q_LUT_EN	(1 << 1)
+#define E4K_DC5_RANGE_DET_EN	(1 << 2)
+#define E4K_DC5_RANGE_EN	(1 << 3)
+#define E4K_DC5_TIMEVAR_EN	(1 << 4)
+
+#define E4K_CLKOUT_DISABLE	0x96
+
+#define E4K_CHFCALIB_CMD	(1 << 0)
+
+#define E4K_AGC1_MOD_MASK	0xF
+
+enum e4k_agc_mode {
+	E4K_AGC_MOD_SERIAL		= 0x0,
+	E4K_AGC_MOD_IF_PWM_LNA_SERIAL	= 0x1,
+	E4K_AGC_MOD_IF_PWM_LNA_AUTONL	= 0x2,
+	E4K_AGC_MOD_IF_PWM_LNA_SUPERV	= 0x3,
+	E4K_AGC_MOD_IF_SERIAL_LNA_PWM	= 0x4,
+	E4K_AGC_MOD_IF_PWM_LNA_PWM	= 0x5,
+	E4K_AGC_MOD_IF_DIG_LNA_SERIAL	= 0x6,
+	E4K_AGC_MOD_IF_DIG_LNA_AUTON	= 0x7,
+	E4K_AGC_MOD_IF_DIG_LNA_SUPERV	= 0x8,
+	E4K_AGC_MOD_IF_SERIAL_LNA_AUTON	= 0x9,
+	E4K_AGC_MOD_IF_SERIAL_LNA_SUPERV = 0xa,
+};
+
+enum e4k_band {
+	E4K_BAND_VHF2	= 0,
+	E4K_BAND_VHF3	= 1,
+	E4K_BAND_UHF	= 2,
+	E4K_BAND_L	= 3,
+};
+
+enum e4k_mixer_filter_bw {
+	E4K_F_MIX_BW_27M	= 0,
+	E4K_F_MIX_BW_4M6	= 8,
+	E4K_F_MIX_BW_4M2	= 9,
+	E4K_F_MIX_BW_3M8	= 10,
+	E4K_F_MIX_BW_3M4	= 11,
+	E4K_F_MIX_BW_3M		= 12,
+	E4K_F_MIX_BW_2M7	= 13,
+	E4K_F_MIX_BW_2M3	= 14,
+	E4K_F_MIX_BW_1M9	= 15,
+};
+
+enum e4k_if_filter {
+	E4K_IF_FILTER_MIX,
+	E4K_IF_FILTER_CHAN,
+	E4K_IF_FILTER_RC
+};
+struct e4k_pll_params {
+	uint32_t fosc;
+	uint32_t intended_flo;
+	uint32_t flo;
+	uint16_t x;
+	uint8_t z;
+	uint8_t r;
+	uint8_t r_idx;
+	uint8_t threephase;
+};
+
+struct e4k_state {
+	void *i2c_dev;
+	uint8_t i2c_addr;
+	enum e4k_band band;
+	struct e4k_pll_params vco;
+	void *rtl_dev;
+};
+
+int e4k_init(struct e4k_state *e4k);
+int e4k_standby(struct e4k_state *e4k, int enable);
+int e4k_if_gain_set(struct e4k_state *e4k, uint8_t stage, int8_t value);
+int e4k_mixer_gain_set(struct e4k_state *e4k, int8_t value);
+int e4k_commonmode_set(struct e4k_state *e4k, int8_t value);
+int e4k_tune_freq(struct e4k_state *e4k, uint32_t freq);
+int e4k_tune_params(struct e4k_state *e4k, struct e4k_pll_params *p);
+uint32_t e4k_compute_pll_params(struct e4k_pll_params *oscp, uint32_t fosc, uint32_t intended_flo);
+int e4k_if_filter_bw_get(struct e4k_state *e4k, enum e4k_if_filter filter);
+int e4k_if_filter_bw_set(struct e4k_state *e4k, enum e4k_if_filter filter,
+		         uint32_t bandwidth);
+int e4k_if_filter_chan_enable(struct e4k_state *e4k, int on);
+int e4k_rf_filter_set(struct e4k_state *e4k);
+
+int e4k_manual_dc_offset(struct e4k_state *e4k, int8_t iofs, int8_t irange, int8_t qofs, int8_t qrange);
+int e4k_dc_offset_calibrate(struct e4k_state *e4k);
+int e4k_dc_offset_gen_table(struct e4k_state *e4k);
+
+int e4k_set_lna_gain(struct e4k_state *e4k, int32_t gain);
+int e4k_enable_manual_gain(struct e4k_state *e4k, uint8_t manual);
+int e4k_set_enh_gain(struct e4k_state *e4k, int32_t gain);
+#endif /* _E4K_TUNER_H */
diff --git a/Radio/HW/RtlSdr/r820/include/tuner_fc0012.h b/Radio/HW/RtlSdr/r820/include/tuner_fc0012.h
new file mode 100644
index 0000000..9dd5356
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/tuner_fc0012.h
@@ -0,0 +1,36 @@
+/*
+ * Fitipower FC0012 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ *
+ * modified for use in librtlsdr
+ * Copyright (C) 2012 Steve Markgraf <steve@steve-m.de>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _FC0012_H_
+#define _FC0012_H_
+
+#define FC0012_I2C_ADDR		0xc6
+#define FC0012_CHECK_ADDR	0x00
+#define FC0012_CHECK_VAL	0xa1
+
+int fc0012_init(void *dev);
+int fc0012_set_params(void *dev, uint32_t freq, uint32_t bandwidth);
+int fc0012_set_gain(void *dev, int gain);
+
+#endif
diff --git a/Radio/HW/RtlSdr/r820/include/tuner_fc0013.h b/Radio/HW/RtlSdr/r820/include/tuner_fc0013.h
new file mode 100644
index 0000000..68a26ee
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/tuner_fc0013.h
@@ -0,0 +1,37 @@
+/*
+ * Fitipower FC0013 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ *
+ * modified for use in librtlsdr
+ * Copyright (C) 2012 Steve Markgraf <steve@steve-m.de>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _FC0013_H_
+#define _FC0013_H_
+
+#define FC0013_I2C_ADDR		0xc6
+#define FC0013_CHECK_ADDR	0x00
+#define FC0013_CHECK_VAL	0xa3
+
+int fc0013_init(void *dev);
+int fc0013_set_params(void *dev, uint32_t freq, uint32_t bandwidth);
+int fc0013_set_gain_mode(void *dev, int manual);
+int fc0013_set_lna_gain(void *dev, int gain);
+
+#endif
diff --git a/Radio/HW/RtlSdr/r820/include/tuner_fc2580.h b/Radio/HW/RtlSdr/r820/include/tuner_fc2580.h
new file mode 100644
index 0000000..9ebd935
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/tuner_fc2580.h
@@ -0,0 +1,127 @@
+#ifndef __TUNER_FC2580_H
+#define __TUNER_FC2580_H
+
+#define	BORDER_FREQ	2600000	//2.6GHz : The border frequency which determines whether Low VCO or High VCO is used
+#define USE_EXT_CLK	0	//0 : Use internal XTAL Oscillator / 1 : Use External Clock input
+#define OFS_RSSI 57
+
+#define FC2580_I2C_ADDR		0xac
+#define FC2580_CHECK_ADDR	0x01
+#define FC2580_CHECK_VAL	0x56
+
+typedef enum {
+	FC2580_UHF_BAND,
+	FC2580_L_BAND,
+	FC2580_VHF_BAND,
+	FC2580_NO_BAND
+} fc2580_band_type;
+
+typedef enum {
+	FC2580_FCI_FAIL,
+	FC2580_FCI_SUCCESS
+} fc2580_fci_result_type;
+
+enum FUNCTION_STATUS
+{
+	FUNCTION_SUCCESS,
+	FUNCTION_ERROR,
+};
+
+extern void fc2580_wait_msec(void *pTuner, int a);
+
+fc2580_fci_result_type fc2580_i2c_write(void *pTuner, unsigned char reg, unsigned char val);
+fc2580_fci_result_type fc2580_i2c_read(void *pTuner, unsigned char reg, unsigned char *read_data);
+
+/*==============================================================================
+       fc2580 initial setting
+
+  This function is a generic function which gets called to initialize
+
+  fc2580 in DVB-H mode or L-Band TDMB mode
+
+  <input parameter>
+
+  ifagc_mode
+    type : integer
+	1 : Internal AGC
+	2 : Voltage Control Mode
+
+==============================================================================*/
+fc2580_fci_result_type fc2580_set_init(void *pTuner, int ifagc_mode, unsigned int freq_xtal );
+
+/*==============================================================================
+       fc2580 frequency setting
+
+  This function is a generic function which gets called to change LO Frequency
+
+  of fc2580 in DVB-H mode or L-Band TDMB mode
+
+  <input parameter>
+
+  f_lo
+	Value of target LO Frequency in 'kHz' unit
+	ex) 2.6GHz = 2600000
+
+==============================================================================*/
+fc2580_fci_result_type fc2580_set_freq(void *pTuner, unsigned int f_lo, unsigned int freq_xtal );
+
+
+/*==============================================================================
+       fc2580 filter BW setting
+
+  This function is a generic function which gets called to change Bandwidth
+
+  frequency of fc2580's channel selection filter
+
+  <input parameter>
+
+  filter_bw
+    1 : 1.53MHz(TDMB)
+	6 : 6MHz
+	7 : 7MHz
+	8 : 7.8MHz
+
+
+==============================================================================*/
+fc2580_fci_result_type fc2580_set_filter( void *pTuner, unsigned char filter_bw, unsigned int freq_xtal );
+
+// The following context is FC2580 tuner API source code
+// Definitions
+
+// AGC mode
+enum FC2580_AGC_MODE
+{
+	FC2580_AGC_INTERNAL = 1,
+	FC2580_AGC_EXTERNAL = 2,
+};
+
+
+// Bandwidth mode
+enum FC2580_BANDWIDTH_MODE
+{
+	FC2580_BANDWIDTH_1530000HZ = 1,
+	FC2580_BANDWIDTH_6000000HZ = 6,
+	FC2580_BANDWIDTH_7000000HZ = 7,
+	FC2580_BANDWIDTH_8000000HZ = 8,
+};
+
+// Manipulaing functions
+int
+fc2580_Initialize(
+	void *pTuner
+	);
+
+int
+fc2580_SetRfFreqHz(
+	void *pTuner,
+	unsigned long RfFreqHz
+	);
+
+// Extra manipulaing functions
+int
+fc2580_SetBandwidthMode(
+	void *pTuner,
+	int BandwidthMode
+	);
+
+#endif
diff --git a/Radio/HW/RtlSdr/r820/include/tuner_r82xx.h b/Radio/HW/RtlSdr/r820/include/tuner_r82xx.h
new file mode 100644
index 0000000..f6c206a
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/include/tuner_r82xx.h
@@ -0,0 +1,120 @@
+/*
+ * Rafael Micro R820T/R828D driver
+ *
+ * Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (C) 2013 Steve Markgraf <steve@steve-m.de>
+ *
+ * This driver is a heavily modified version of the driver found in the
+ * Linux kernel:
+ * http://git.linuxtv.org/linux-2.6.git/history/HEAD:/drivers/media/tuners/r820t.c
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef R82XX_H
+#define R82XX_H
+
+#define R820T_I2C_ADDR		0x34
+#define R828D_I2C_ADDR		0x74
+#define R828D_XTAL_FREQ		16000000
+
+#define R82XX_CHECK_ADDR	0x00
+#define R82XX_CHECK_VAL		0x69
+
+#define R82XX_IF_FREQ		3570000
+
+#define REG_SHADOW_START	5
+#define NUM_REGS		30
+#define NUM_IMR			5
+#define IMR_TRIAL		9
+
+#define VER_NUM			49
+
+enum r82xx_chip {
+	CHIP_R820T,
+	CHIP_R620D,
+	CHIP_R828D,
+	CHIP_R828,
+	CHIP_R828S,
+	CHIP_R820C,
+};
+
+enum r82xx_tuner_type {
+	TUNER_RADIO = 1,
+	TUNER_ANALOG_TV,
+	TUNER_DIGITAL_TV
+};
+
+enum r82xx_xtal_cap_value {
+	XTAL_LOW_CAP_30P = 0,
+	XTAL_LOW_CAP_20P,
+	XTAL_LOW_CAP_10P,
+	XTAL_LOW_CAP_0P,
+	XTAL_HIGH_CAP_0P
+};
+
+struct r82xx_config {
+	uint8_t i2c_addr;
+	uint32_t xtal;
+	enum r82xx_chip rafael_chip;
+	unsigned int max_i2c_msg_len;
+	int use_predetect;
+};
+
+struct r82xx_priv {
+	struct r82xx_config		*cfg;
+
+	uint8_t				regs[NUM_REGS];
+	uint8_t				buf[NUM_REGS + 1];
+	enum r82xx_xtal_cap_value	xtal_cap_sel;
+	uint16_t			pll;	/* kHz */
+	uint32_t			int_freq;
+	uint8_t				fil_cal_code;
+	uint8_t				input;
+	int				has_lock;
+	int				init_done;
+
+	/* Store current mode */
+	uint32_t			delsys;
+	enum r82xx_tuner_type		type;
+
+	uint32_t			bw;	/* in MHz */
+
+	void *rtl_dev;
+};
+
+struct r82xx_freq_range {
+	uint32_t	freq;
+	uint8_t		open_d;
+	uint8_t		rf_mux_ploy;
+	uint8_t		tf_c;
+	uint8_t		xtal_cap20p;
+	uint8_t		xtal_cap10p;
+	uint8_t		xtal_cap0p;
+};
+
+enum r82xx_delivery_system {
+	SYS_UNDEFINED,
+	SYS_DVBT,
+	SYS_DVBT2,
+	SYS_ISDBT,
+};
+
+int r82xx_standby(struct r82xx_priv *priv);
+int r82xx_init(struct r82xx_priv *priv);
+int r82xx_set_freq(struct r82xx_priv *priv, uint32_t freq);
+int r82xx_set_gain(struct r82xx_priv *priv, int set_manual_gain, int gain);
+int r82xx_set_bandwidth(struct r82xx_priv *priv, int bandwidth,  uint32_t rate);
+
+#endif
diff --git a/Radio/HW/RtlSdr/r820/r820.swift b/Radio/HW/RtlSdr/r820/r820.swift
new file mode 100644
index 0000000..f5e1177
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/r820.swift
@@ -0,0 +1,198 @@
+//
+//  r820.swift
+//  r820sdr-init
+//
+//  Created by Jacky Jack on 15/03/2022.
+//
+
+//https://www.kodeco.com/7181017-unsafe-swift-using-pointers-and-interacting-with-c
+
+import Foundation
+//import TestRtlSdr
+import libr820
+
+public class R820API {
+    
+    
+    func R820() {
+        print("Start device API")
+    }
+    
+    func getDeviceCount() -> UInt32 {
+        return rtlsdr_get_device_count()
+    }
+    
+    
+    
+}
+
+public class R820Tuner {
+    var deviceInitalized:Bool = false
+    var dev:       OpaquePointer?  = nil
+    
+    /**
+     Function to initialise tunner
+     - Parameters:
+     -
+     */
+    func R820Tuner() {
+        print("Initialise tunner")
+    }
+    
+    func open(index devId: UInt32) {
+        let err = rtlsdr_open(&dev,devId)
+        if (err != 0) {
+            print("Error couldnt open device")
+            return
+        }
+        deviceInitalized = true
+    }
+    
+    func close() {
+        if self.deviceInitalized {
+            rtlsdr_close(dev);
+            dev = nil
+        }
+    }
+    
+    func getDeviceCount()->UInt32 {
+        return rtlsdr_get_device_count();
+    }
+    
+    /*
+     func getDeviceName(index: UInt32) -> String {
+     return rtlsdr_get_device_name(index)
+     }
+     */
+    
+    /*
+     func getDeviceUsbString() {
+     return rtlsdr_get_device_usb_strings();
+     }*/
+    func getIndexBySerial(serial: String) -> Int32
+    {
+        return rtlsdr_get_index_by_serial(serial);//is this ok?
+    }
+    
+    func setXtalFreq(rtlFreq: UInt32, tunnerFreq: UInt32) -> Int32 {
+        return rtlsdr_set_xtal_freq(dev, rtlFreq, tunnerFreq);
+    }
+    
+    func getXtalFreq(rtlFreq: UnsafeMutablePointer<UInt32>?, tunnerFreq: UnsafeMutablePointer<UInt32>?)->Int32{
+        return rtlsdr_get_xtal_freq(dev, rtlFreq, tunnerFreq)
+    }
+    
+    func getUsbStrings(manufact: UnsafeMutablePointer<CChar>?, product: UnsafeMutablePointer<CChar>?, serial: UnsafeMutablePointer<CChar>?) -> Int32{
+        return rtlsdr_get_usb_strings(dev, manufact, product, serial)
+    }
+    
+    func writeEeprom(data: UnsafeMutablePointer<UInt8>?,offset: UInt8, len: UInt16) -> Int32 {
+        return rtlsdr_write_eeprom(dev, data, offset, len)
+    }
+    
+    func readEeprom(data: UnsafeMutablePointer<UInt8>?,offset: UInt8, len: UInt16) -> Int32 {
+        return rtlsdr_read_eeprom(dev, data, offset, len)
+    }
+    
+    func setCenterFreq(freq: UInt32) -> Int32{
+        return rtlsdr_set_center_freq(dev, freq);
+    }
+    
+    func getCenterFreq()->UInt32 {
+        return rtlsdr_get_center_freq(dev)
+    }
+    
+    func setFreqCorrection(ppm: Int32) -> Int32 {
+        return rtlsdr_set_freq_correction(dev, ppm)
+    }
+    
+    func getFreqCorrection() -> Int32 {
+        return rtlsdr_get_freq_correction(dev)
+    }
+    
+    
+    func getTunerType() -> rtlsdr_tuner {
+        return rtlsdr_get_tuner_type(dev)
+    }
+    
+    func getTunerGains(gains: UnsafeMutablePointer<Int32>?) -> Int32 {
+        return rtlsdr_get_tuner_gains(dev, gains)
+    }
+    
+    func setTunerGain(gain: Int32) -> Int32 {
+        return rtlsdr_set_tuner_gain(dev,gain);
+    }
+    
+    func setTunnerBandwidth(bw: UInt32) -> Int32 {
+        return rtlsdr_set_tuner_bandwidth(dev, bw)
+    }
+    
+    func setTunerIfGain(stage: Int32, gain: Int32) -> Int32 {
+        return rtlsdr_set_tuner_if_gain(dev,stage,gain)
+    }
+    
+    func setTunerGainMode(manual: Int32) -> Int32 {
+        return rtlsdr_set_tuner_gain_mode(dev, manual)
+    }
+    
+    func setSampleRate(samplerate: UInt32) -> Int32 {
+        return rtlsdr_set_sample_rate(dev, samplerate)
+    }
+    
+    func getSampleRate() -> UInt32 {
+        return rtlsdr_get_sample_rate(dev)
+    }
+    
+    func setTestmode(on: Int32) -> Int32 {
+        return rtlsdr_set_testmode(dev, on);
+    }
+    
+    func setAgcMode(on: Int32) -> Int32 {
+        return rtlsdr_set_agc_mode(dev, on);
+    }
+    
+    func setDirectSampling(on: Int32) -> Int32 {
+        return rtlsdr_set_direct_sampling(dev, on)
+    }
+    
+    func getDirectSampling() -> Int32 {
+        return rtlsdr_get_direct_sampling(dev)
+    }
+    
+    func setOffsetTuning(on: Int32) -> Int32 {
+        return rtlsdr_set_offset_tuning(dev, on)
+    }
+    
+    func getOffsetTuning() -> Int32 {
+        return rtlsdr_get_offset_tuning(dev)
+    }
+    
+    func resetBuffer() -> Int32 {
+        return rtlsdr_reset_buffer(dev)
+    }
+    
+    func readSync(buf:UnsafeMutableRawPointer?,len: Int32,n_read:UnsafeMutablePointer<Int32>?) -> Int32 {
+        return rtlsdr_read_sync(dev, buf, len, n_read);
+    }
+    
+    func waitAsync(cb: rtlsdr_read_async_cb_t?, ctx:UnsafeMutableRawPointer?) -> Int32{
+        return rtlsdr_wait_async(dev,cb, ctx);
+    }
+    
+    func readAsync(cb: rtlsdr_read_async_cb_t,ctx:UnsafeMutableRawPointer?, buf_num: UInt32, buf_len: UInt32) -> Int32 {
+        return rtlsdr_read_async(dev, cb, ctx, buf_num, buf_len)
+    }
+    
+    func cancelAsync() -> Int32 {
+        return rtlsdr_cancel_async(dev);
+    }
+    
+    func setBiasTee(on: Int32) -> Int32 {
+        return rtlsdr_set_bias_tee(dev, on)
+    }
+    
+    func setBiasTeeGpio(gpio: Int32, on: Int32) -> Int32 {
+        return rtlsdr_set_bias_tee_gpio(dev,gpio, on)
+    }
+    
+}
diff --git a/Radio/HW/RtlSdr/r820/src/libr820-Bridging-Header.h b/Radio/HW/RtlSdr/r820/src/libr820-Bridging-Header.h
new file mode 100644
index 0000000..fd7a194
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/libr820-Bridging-Header.h
@@ -0,0 +1,5 @@
+//
+//  Use this file to import your target's public headers that you would like to expose to Swift.
+//
+
+#include "../include/rtl-sdr.h"
diff --git a/Radio/HW/RtlSdr/r820/src/librtlsdr.c b/Radio/HW/RtlSdr/r820/src/librtlsdr.c
new file mode 100644
index 0000000..2deb38c
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/librtlsdr.c
@@ -0,0 +1,2023 @@
+/*
+ * rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver
+ * Copyright (C) 2012-2014 by Steve Markgraf <steve@steve-m.de>
+ * Copyright (C) 2012 by Dimitri Stolnikov <horiz0n@gmx.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <signal.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#ifndef _WIN32
+#include <unistd.h>
+#define min(a, b) (((a) < (b)) ? (a) : (b))
+#endif
+
+#include "libusb.h"
+
+/*
+ * All libusb callback functions should be marked with the LIBUSB_CALL macro
+ * to ensure that they are compiled with the same calling convention as libusb.
+ *
+ * If the macro isn't available in older libusb versions, we simply define it.
+ */
+#ifndef LIBUSB_CALL
+#define LIBUSB_CALL
+#endif
+
+/* two raised to the power of n */
+#define TWO_POW(n)		((double)(1ULL<<(n)))
+
+#include "rtl-sdr.h"
+#include "tuner_e4k.h"
+#include "tuner_fc0012.h"
+#include "tuner_fc0013.h"
+#include "tuner_fc2580.h"
+#include "tuner_r82xx.h"
+
+typedef struct rtlsdr_tuner_iface {
+	/* tuner interface */
+	int (*init)(void *);
+	int (*exit)(void *);
+	int (*set_freq)(void *, uint32_t freq /* Hz */);
+	int (*set_bw)(void *, int bw /* Hz */);
+	int (*set_gain)(void *, int gain /* tenth dB */);
+	int (*set_if_gain)(void *, int stage, int gain /* tenth dB */);
+	int (*set_gain_mode)(void *, int manual);
+} rtlsdr_tuner_iface_t;
+
+enum rtlsdr_async_status {
+	RTLSDR_INACTIVE = 0,
+	RTLSDR_CANCELING,
+	RTLSDR_RUNNING
+};
+
+#define FIR_LEN 16
+
+/*
+ * FIR coefficients.
+ *
+ * The filter is running at XTal frequency. It is symmetric filter with 32
+ * coefficients. Only first 16 coefficients are specified, the other 16
+ * use the same values but in reversed order. The first coefficient in
+ * the array is the outer one, the last, the last is the inner one.
+ * First 8 coefficients are 8 bit signed integers, the next 8 coefficients
+ * are 12 bit signed integers. All coefficients have the same weight.
+ *
+ * Default FIR coefficients used for DAB/FM by the Windows driver,
+ * the DVB driver uses different ones
+ */
+static const int fir_default[FIR_LEN] = {
+	-54, -36, -41, -40, -32, -14, 14, 53,	/* 8 bit signed */
+	101, 156, 215, 273, 327, 372, 404, 421	/* 12 bit signed */
+};
+
+struct rtlsdr_dev {
+	libusb_context *ctx;
+	struct libusb_device_handle *devh;
+	uint32_t xfer_buf_num;
+	uint32_t xfer_buf_len;
+	struct libusb_transfer **xfer;
+	unsigned char **xfer_buf;
+	rtlsdr_read_async_cb_t cb;
+	void *cb_ctx;
+	enum rtlsdr_async_status async_status;
+	int async_cancel;
+	int use_zerocopy;
+	/* rtl demod context */
+	uint32_t rate; /* Hz */
+	uint32_t rtl_xtal; /* Hz */
+	int fir[FIR_LEN];
+	int direct_sampling;
+	/* tuner context */
+	enum rtlsdr_tuner tuner_type;
+	rtlsdr_tuner_iface_t *tuner;
+	uint32_t tun_xtal; /* Hz */
+	uint32_t freq; /* Hz */
+	uint32_t bw;
+	uint32_t offs_freq; /* Hz */
+	int corr; /* ppm */
+	int gain; /* tenth dB */
+	struct e4k_state e4k_s;
+	struct r82xx_config r82xx_c;
+	struct r82xx_priv r82xx_p;
+	/* status */
+	int dev_lost;
+	int driver_active;
+	unsigned int xfer_errors;
+};
+
+void rtlsdr_set_gpio_bit(rtlsdr_dev_t *dev, uint8_t gpio, int val);
+static int rtlsdr_set_if_freq(rtlsdr_dev_t *dev, uint32_t freq);
+
+/* generic tuner interface functions, shall be moved to the tuner implementations */
+int e4000_init(void *dev) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	devt->e4k_s.i2c_addr = E4K_I2C_ADDR;
+	rtlsdr_get_xtal_freq(devt, NULL, &devt->e4k_s.vco.fosc);
+	devt->e4k_s.rtl_dev = dev;
+	return e4k_init(&devt->e4k_s);
+}
+int e4000_exit(void *dev) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return e4k_standby(&devt->e4k_s, 1);
+}
+int e4000_set_freq(void *dev, uint32_t freq) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return e4k_tune_freq(&devt->e4k_s, freq);
+}
+
+int e4000_set_bw(void *dev, int bw) {
+	int r = 0;
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+
+	r |= e4k_if_filter_bw_set(&devt->e4k_s, E4K_IF_FILTER_MIX, bw);
+	r |= e4k_if_filter_bw_set(&devt->e4k_s, E4K_IF_FILTER_RC, bw);
+	r |= e4k_if_filter_bw_set(&devt->e4k_s, E4K_IF_FILTER_CHAN, bw);
+
+	return r;
+}
+
+int e4000_set_gain(void *dev, int gain) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	int mixgain = (gain > 340) ? 12 : 4;
+#if 0
+	int enhgain = (gain - 420);
+#endif
+	if(e4k_set_lna_gain(&devt->e4k_s, min(300, gain - mixgain * 10)) == -EINVAL)
+		return -1;
+	if(e4k_mixer_gain_set(&devt->e4k_s, mixgain) == -EINVAL)
+		return -1;
+#if 0 /* enhanced mixer gain seems to have no effect */
+	if(enhgain >= 0)
+		if(e4k_set_enh_gain(&devt->e4k_s, enhgain) == -EINVAL)
+			return -1;
+#endif
+	return 0;
+}
+int e4000_set_if_gain(void *dev, int stage, int gain) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return e4k_if_gain_set(&devt->e4k_s, (uint8_t)stage, (int8_t)(gain / 10));
+}
+int e4000_set_gain_mode(void *dev, int manual) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return e4k_enable_manual_gain(&devt->e4k_s, manual);
+}
+
+int _fc0012_init(void *dev) { return fc0012_init(dev); }
+int fc0012_exit(void *dev) { return 0; }
+int fc0012_set_freq(void *dev, uint32_t freq) {
+	/* select V-band/U-band filter */
+	rtlsdr_set_gpio_bit(dev, 6, (freq > 300000000) ? 1 : 0);
+	return fc0012_set_params(dev, freq, 6000000);
+}
+int fc0012_set_bw(void *dev, int bw) { return 0; }
+int _fc0012_set_gain(void *dev, int gain) { return fc0012_set_gain(dev, gain); }
+int fc0012_set_gain_mode(void *dev, int manual) { return 0; }
+
+int _fc0013_init(void *dev) { return fc0013_init(dev); }
+int fc0013_exit(void *dev) { return 0; }
+int fc0013_set_freq(void *dev, uint32_t freq) {
+	return fc0013_set_params(dev, freq, 6000000);
+}
+int fc0013_set_bw(void *dev, int bw) { return 0; }
+int _fc0013_set_gain(void *dev, int gain) { return fc0013_set_lna_gain(dev, gain); }
+
+int fc2580_init(void *dev) { return fc2580_Initialize(dev); }
+int fc2580_exit(void *dev) { return 0; }
+int _fc2580_set_freq(void *dev, uint32_t freq) {
+	return fc2580_SetRfFreqHz(dev, freq);
+}
+int fc2580_set_bw(void *dev, int bw) { return fc2580_SetBandwidthMode(dev, 1); }
+int fc2580_set_gain(void *dev, int gain) { return 0; }
+int fc2580_set_gain_mode(void *dev, int manual) { return 0; }
+
+int r820t_init(void *dev) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	devt->r82xx_p.rtl_dev = dev;
+
+	if (devt->tuner_type == RTLSDR_TUNER_R828D) {
+		devt->r82xx_c.i2c_addr = R828D_I2C_ADDR;
+		devt->r82xx_c.rafael_chip = CHIP_R828D;
+	} else {
+		devt->r82xx_c.i2c_addr = R820T_I2C_ADDR;
+		devt->r82xx_c.rafael_chip = CHIP_R820T;
+	}
+
+	rtlsdr_get_xtal_freq(devt, NULL, &devt->r82xx_c.xtal);
+
+	devt->r82xx_c.max_i2c_msg_len = 8;
+	devt->r82xx_c.use_predetect = 0;
+	devt->r82xx_p.cfg = &devt->r82xx_c;
+
+	return r82xx_init(&devt->r82xx_p);
+}
+int r820t_exit(void *dev) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return r82xx_standby(&devt->r82xx_p);
+}
+
+int r820t_set_freq(void *dev, uint32_t freq) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return r82xx_set_freq(&devt->r82xx_p, freq);
+}
+
+int r820t_set_bw(void *dev, int bw) {
+	int r;
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+
+	r = r82xx_set_bandwidth(&devt->r82xx_p, bw, devt->rate);
+	if(r < 0)
+		return r;
+	r = rtlsdr_set_if_freq(devt, r);
+	if (r)
+		return r;
+	return rtlsdr_set_center_freq(devt, devt->freq);
+}
+
+int r820t_set_gain(void *dev, int gain) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return r82xx_set_gain(&devt->r82xx_p, 1, gain);
+}
+int r820t_set_gain_mode(void *dev, int manual) {
+	rtlsdr_dev_t* devt = (rtlsdr_dev_t*)dev;
+	return r82xx_set_gain(&devt->r82xx_p, manual, 0);
+}
+
+/* definition order must match enum rtlsdr_tuner */
+static rtlsdr_tuner_iface_t tuners[] = {
+	{
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL /* dummy for unknown tuners */
+	},
+	{
+		e4000_init, e4000_exit,
+		e4000_set_freq, e4000_set_bw, e4000_set_gain, e4000_set_if_gain,
+		e4000_set_gain_mode
+	},
+	{
+		_fc0012_init, fc0012_exit,
+		fc0012_set_freq, fc0012_set_bw, _fc0012_set_gain, NULL,
+		fc0012_set_gain_mode
+	},
+	{
+		_fc0013_init, fc0013_exit,
+		fc0013_set_freq, fc0013_set_bw, _fc0013_set_gain, NULL,
+		fc0013_set_gain_mode
+	},
+	{
+		fc2580_init, fc2580_exit,
+		_fc2580_set_freq, fc2580_set_bw, fc2580_set_gain, NULL,
+		fc2580_set_gain_mode
+	},
+	{
+		r820t_init, r820t_exit,
+		r820t_set_freq, r820t_set_bw, r820t_set_gain, NULL,
+		r820t_set_gain_mode
+	},
+	{
+		r820t_init, r820t_exit,
+		r820t_set_freq, r820t_set_bw, r820t_set_gain, NULL,
+		r820t_set_gain_mode
+	},
+};
+
+typedef struct rtlsdr_dongle {
+	uint16_t vid;
+	uint16_t pid;
+	const char *name;
+} rtlsdr_dongle_t;
+
+/*
+ * Please add your device here and send a patch to osmocom-sdr@lists.osmocom.org
+ */
+static rtlsdr_dongle_t known_devices[] = {
+	{ 0x0bda, 0x2832, "Generic RTL2832U" },
+	{ 0x0bda, 0x2838, "Generic RTL2832U OEM" },
+	{ 0x0413, 0x6680, "DigitalNow Quad DVB-T PCI-E card" },
+	{ 0x0413, 0x6f0f, "Leadtek WinFast DTV Dongle mini D" },
+	{ 0x0458, 0x707f, "Genius TVGo DVB-T03 USB dongle (Ver. B)" },
+	{ 0x0ccd, 0x00a9, "Terratec Cinergy T Stick Black (rev 1)" },
+	{ 0x0ccd, 0x00b3, "Terratec NOXON DAB/DAB+ USB dongle (rev 1)" },
+	{ 0x0ccd, 0x00b4, "Terratec Deutschlandradio DAB Stick" },
+	{ 0x0ccd, 0x00b5, "Terratec NOXON DAB Stick - Radio Energy" },
+	{ 0x0ccd, 0x00b7, "Terratec Media Broadcast DAB Stick" },
+	{ 0x0ccd, 0x00b8, "Terratec BR DAB Stick" },
+	{ 0x0ccd, 0x00b9, "Terratec WDR DAB Stick" },
+	{ 0x0ccd, 0x00c0, "Terratec MuellerVerlag DAB Stick" },
+	{ 0x0ccd, 0x00c6, "Terratec Fraunhofer DAB Stick" },
+	{ 0x0ccd, 0x00d3, "Terratec Cinergy T Stick RC (Rev.3)" },
+	{ 0x0ccd, 0x00d7, "Terratec T Stick PLUS" },
+	{ 0x0ccd, 0x00e0, "Terratec NOXON DAB/DAB+ USB dongle (rev 2)" },
+	{ 0x1554, 0x5020, "PixelView PV-DT235U(RN)" },
+	{ 0x15f4, 0x0131, "Astrometa DVB-T/DVB-T2" },
+	{ 0x15f4, 0x0133, "HanfTek DAB+FM+DVB-T" },
+	{ 0x185b, 0x0620, "Compro Videomate U620F"},
+	{ 0x185b, 0x0650, "Compro Videomate U650F"},
+	{ 0x185b, 0x0680, "Compro Videomate U680F"},
+	{ 0x1b80, 0xd393, "GIGABYTE GT-U7300" },
+	{ 0x1b80, 0xd394, "DIKOM USB-DVBT HD" },
+	{ 0x1b80, 0xd395, "Peak 102569AGPK" },
+	{ 0x1b80, 0xd397, "KWorld KW-UB450-T USB DVB-T Pico TV" },
+	{ 0x1b80, 0xd398, "Zaapa ZT-MINDVBZP" },
+	{ 0x1b80, 0xd39d, "SVEON STV20 DVB-T USB & FM" },
+	{ 0x1b80, 0xd3a4, "Twintech UT-40" },
+	{ 0x1b80, 0xd3a8, "ASUS U3100MINI_PLUS_V2" },
+	{ 0x1b80, 0xd3af, "SVEON STV27 DVB-T USB & FM" },
+	{ 0x1b80, 0xd3b0, "SVEON STV21 DVB-T USB & FM" },
+	{ 0x1d19, 0x1101, "Dexatek DK DVB-T Dongle (Logilink VG0002A)" },
+	{ 0x1d19, 0x1102, "Dexatek DK DVB-T Dongle (MSI DigiVox mini II V3.0)" },
+	{ 0x1d19, 0x1103, "Dexatek Technology Ltd. DK 5217 DVB-T Dongle" },
+	{ 0x1d19, 0x1104, "MSI DigiVox Micro HD" },
+	{ 0x1f4d, 0xa803, "Sweex DVB-T USB" },
+	{ 0x1f4d, 0xb803, "GTek T803" },
+	{ 0x1f4d, 0xc803, "Lifeview LV5TDeluxe" },
+	{ 0x1f4d, 0xd286, "MyGica TD312" },
+	{ 0x1f4d, 0xd803, "PROlectrix DV107669" },
+};
+
+#define DEFAULT_BUF_NUMBER	15
+#define DEFAULT_BUF_LENGTH	(16 * 32 * 512)
+
+#define DEF_RTL_XTAL_FREQ	28800000
+#define MIN_RTL_XTAL_FREQ	(DEF_RTL_XTAL_FREQ - 1000)
+#define MAX_RTL_XTAL_FREQ	(DEF_RTL_XTAL_FREQ + 1000)
+
+#define CTRL_IN		(LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN)
+#define CTRL_OUT	(LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT)
+#define CTRL_TIMEOUT	300
+#define BULK_TIMEOUT	0
+
+#define EEPROM_ADDR	0xa0
+
+enum usb_reg {
+	USB_SYSCTL		= 0x2000,
+	USB_CTRL		= 0x2010,
+	USB_STAT		= 0x2014,
+	USB_EPA_CFG		= 0x2144,
+	USB_EPA_CTL		= 0x2148,
+	USB_EPA_MAXPKT		= 0x2158,
+	USB_EPA_MAXPKT_2	= 0x215a,
+	USB_EPA_FIFO_CFG	= 0x2160,
+};
+
+enum sys_reg {
+	DEMOD_CTL		= 0x3000,
+	GPO			= 0x3001,
+	GPI			= 0x3002,
+	GPOE			= 0x3003,
+	GPD			= 0x3004,
+	SYSINTE			= 0x3005,
+	SYSINTS			= 0x3006,
+	GP_CFG0			= 0x3007,
+	GP_CFG1			= 0x3008,
+	SYSINTE_1		= 0x3009,
+	SYSINTS_1		= 0x300a,
+	DEMOD_CTL_1		= 0x300b,
+	IR_SUSPEND		= 0x300c,
+};
+
+enum blocks {
+	DEMODB			= 0,
+	USBB			= 1,
+	SYSB			= 2,
+	TUNB			= 3,
+	ROMB			= 4,
+	IRB			= 5,
+	IICB			= 6,
+};
+
+int rtlsdr_read_array(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint8_t *array, uint8_t len)
+{
+	int r;
+	uint16_t index = (block << 8);
+
+	r = libusb_control_transfer(dev->devh, CTRL_IN, 0, addr, index, array, len, CTRL_TIMEOUT);
+#if 0
+	if (r < 0)
+		fprintf(stderr, "%s failed with %d\n", __FUNCTION__, r);
+#endif
+	return r;
+}
+
+int rtlsdr_write_array(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint8_t *array, uint8_t len)
+{
+	int r;
+	uint16_t index = (block << 8) | 0x10;
+
+	r = libusb_control_transfer(dev->devh, CTRL_OUT, 0, addr, index, array, len, CTRL_TIMEOUT);
+#if 0
+	if (r < 0)
+		fprintf(stderr, "%s failed with %d\n", __FUNCTION__, r);
+#endif
+	return r;
+}
+
+int rtlsdr_i2c_write_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t reg, uint8_t val)
+{
+	uint16_t addr = i2c_addr;
+	uint8_t data[2];
+
+	data[0] = reg;
+	data[1] = val;
+	return rtlsdr_write_array(dev, IICB, addr, (uint8_t *)&data, 2);
+}
+
+uint8_t rtlsdr_i2c_read_reg(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t reg)
+{
+	uint16_t addr = i2c_addr;
+	uint8_t data = 0;
+
+	rtlsdr_write_array(dev, IICB, addr, &reg, 1);
+	rtlsdr_read_array(dev, IICB, addr, &data, 1);
+
+	return data;
+}
+
+int rtlsdr_i2c_write(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t *buffer, int len)
+{
+	uint16_t addr = i2c_addr;
+
+	if (!dev)
+		return -1;
+
+	return rtlsdr_write_array(dev, IICB, addr, buffer, len);
+}
+
+int rtlsdr_i2c_read(rtlsdr_dev_t *dev, uint8_t i2c_addr, uint8_t *buffer, int len)
+{
+	uint16_t addr = i2c_addr;
+
+	if (!dev)
+		return -1;
+
+	return rtlsdr_read_array(dev, IICB, addr, buffer, len);
+}
+
+uint16_t rtlsdr_read_reg(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint8_t len)
+{
+	int r;
+	unsigned char data[2];
+	uint16_t index = (block << 8);
+	uint16_t reg;
+
+	r = libusb_control_transfer(dev->devh, CTRL_IN, 0, addr, index, data, len, CTRL_TIMEOUT);
+
+	if (r < 0)
+		fprintf(stderr, "%s failed with %d\n", __FUNCTION__, r);
+
+	reg = (data[1] << 8) | data[0];
+
+	return reg;
+}
+
+int rtlsdr_write_reg(rtlsdr_dev_t *dev, uint8_t block, uint16_t addr, uint16_t val, uint8_t len)
+{
+	int r;
+	unsigned char data[2];
+
+	uint16_t index = (block << 8) | 0x10;
+
+	if (len == 1)
+		data[0] = val & 0xff;
+	else
+		data[0] = val >> 8;
+
+	data[1] = val & 0xff;
+
+	r = libusb_control_transfer(dev->devh, CTRL_OUT, 0, addr, index, data, len, CTRL_TIMEOUT);
+
+	if (r < 0)
+		fprintf(stderr, "%s failed with %d\n", __FUNCTION__, r);
+
+	return r;
+}
+
+uint16_t rtlsdr_demod_read_reg(rtlsdr_dev_t *dev, uint8_t page, uint16_t addr, uint8_t len)
+{
+	int r;
+	unsigned char data[2];
+
+	uint16_t index = page;
+	uint16_t reg;
+	addr = (addr << 8) | 0x20;
+
+	r = libusb_control_transfer(dev->devh, CTRL_IN, 0, addr, index, data, len, CTRL_TIMEOUT);
+
+	if (r < 0)
+		fprintf(stderr, "%s failed with %d\n", __FUNCTION__, r);
+
+	reg = (data[1] << 8) | data[0];
+
+	return reg;
+}
+
+int rtlsdr_demod_write_reg(rtlsdr_dev_t *dev, uint8_t page, uint16_t addr, uint16_t val, uint8_t len)
+{
+	int r;
+	unsigned char data[2];
+	uint16_t index = 0x10 | page;
+	addr = (addr << 8) | 0x20;
+
+	if (len == 1)
+		data[0] = val & 0xff;
+	else
+		data[0] = val >> 8;
+
+	data[1] = val & 0xff;
+
+	r = libusb_control_transfer(dev->devh, CTRL_OUT, 0, addr, index, data, len, CTRL_TIMEOUT);
+
+	if (r < 0)
+		fprintf(stderr, "%s failed with %d\n", __FUNCTION__, r);
+
+	rtlsdr_demod_read_reg(dev, 0x0a, 0x01, 1);
+
+	return (r == len) ? 0 : -1;
+}
+
+void rtlsdr_set_gpio_bit(rtlsdr_dev_t *dev, uint8_t gpio, int val)
+{
+	uint16_t r;
+
+	gpio = 1 << gpio;
+	r = rtlsdr_read_reg(dev, SYSB, GPO, 1);
+	r = val ? (r | gpio) : (r & ~gpio);
+	rtlsdr_write_reg(dev, SYSB, GPO, r, 1);
+}
+
+void rtlsdr_set_gpio_output(rtlsdr_dev_t *dev, uint8_t gpio)
+{
+	int r;
+	gpio = 1 << gpio;
+
+	r = rtlsdr_read_reg(dev, SYSB, GPD, 1);
+	rtlsdr_write_reg(dev, SYSB, GPD, r & ~gpio, 1);
+	r = rtlsdr_read_reg(dev, SYSB, GPOE, 1);
+	rtlsdr_write_reg(dev, SYSB, GPOE, r | gpio, 1);
+}
+
+void rtlsdr_set_i2c_repeater(rtlsdr_dev_t *dev, int on)
+{
+	rtlsdr_demod_write_reg(dev, 1, 0x01, on ? 0x18 : 0x10, 1);
+}
+
+int rtlsdr_set_fir(rtlsdr_dev_t *dev)
+{
+	uint8_t fir[20];
+
+	int i;
+	/* format: int8_t[8] */
+	for (i = 0; i < 8; ++i) {
+		const int val = dev->fir[i];
+		if (val < -128 || val > 127) {
+			return -1;
+		}
+		fir[i] = val;
+	}
+	/* format: int12_t[8] */
+	for (i = 0; i < 8; i += 2) {
+		const int val0 = dev->fir[8+i];
+		const int val1 = dev->fir[8+i+1];
+		if (val0 < -2048 || val0 > 2047 || val1 < -2048 || val1 > 2047) {
+			return -1;
+		}
+		fir[8+i*3/2] = val0 >> 4;
+		fir[8+i*3/2+1] = (val0 << 4) | ((val1 >> 8) & 0x0f);
+		fir[8+i*3/2+2] = val1;
+	}
+
+	for (i = 0; i < (int)sizeof(fir); i++) {
+		if (rtlsdr_demod_write_reg(dev, 1, 0x1c + i, fir[i], 1))
+				return -1;
+	}
+
+	return 0;
+}
+
+void rtlsdr_init_baseband(rtlsdr_dev_t *dev)
+{
+	unsigned int i;
+
+	/* initialize USB */
+	rtlsdr_write_reg(dev, USBB, USB_SYSCTL, 0x09, 1);
+	rtlsdr_write_reg(dev, USBB, USB_EPA_MAXPKT, 0x0002, 2);
+	rtlsdr_write_reg(dev, USBB, USB_EPA_CTL, 0x1002, 2);
+
+	/* poweron demod */
+	rtlsdr_write_reg(dev, SYSB, DEMOD_CTL_1, 0x22, 1);
+	rtlsdr_write_reg(dev, SYSB, DEMOD_CTL, 0xe8, 1);
+
+	/* reset demod (bit 3, soft_rst) */
+	rtlsdr_demod_write_reg(dev, 1, 0x01, 0x14, 1);
+	rtlsdr_demod_write_reg(dev, 1, 0x01, 0x10, 1);
+
+	/* disable spectrum inversion and adjacent channel rejection */
+	rtlsdr_demod_write_reg(dev, 1, 0x15, 0x00, 1);
+	rtlsdr_demod_write_reg(dev, 1, 0x16, 0x0000, 2);
+
+	/* clear both DDC shift and IF frequency registers  */
+	for (i = 0; i < 6; i++)
+		rtlsdr_demod_write_reg(dev, 1, 0x16 + i, 0x00, 1);
+
+	rtlsdr_set_fir(dev);
+
+	/* enable SDR mode, disable DAGC (bit 5) */
+	rtlsdr_demod_write_reg(dev, 0, 0x19, 0x05, 1);
+
+	/* init FSM state-holding register */
+	rtlsdr_demod_write_reg(dev, 1, 0x93, 0xf0, 1);
+	rtlsdr_demod_write_reg(dev, 1, 0x94, 0x0f, 1);
+
+	/* disable AGC (en_dagc, bit 0) (this seems to have no effect) */
+	rtlsdr_demod_write_reg(dev, 1, 0x11, 0x00, 1);
+
+	/* disable RF and IF AGC loop */
+	rtlsdr_demod_write_reg(dev, 1, 0x04, 0x00, 1);
+
+	/* disable PID filter (enable_PID = 0) */
+	rtlsdr_demod_write_reg(dev, 0, 0x61, 0x60, 1);
+
+	/* opt_adc_iq = 0, default ADC_I/ADC_Q datapath */
+	rtlsdr_demod_write_reg(dev, 0, 0x06, 0x80, 1);
+
+	/* Enable Zero-IF mode (en_bbin bit), DC cancellation (en_dc_est),
+	 * IQ estimation/compensation (en_iq_comp, en_iq_est) */
+	rtlsdr_demod_write_reg(dev, 1, 0xb1, 0x1b, 1);
+
+	/* disable 4.096 MHz clock output on pin TP_CK0 */
+	rtlsdr_demod_write_reg(dev, 0, 0x0d, 0x83, 1);
+}
+
+int rtlsdr_deinit_baseband(rtlsdr_dev_t *dev)
+{
+	int r = 0;
+
+	if (!dev)
+		return -1;
+
+	if (dev->tuner && dev->tuner->exit) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		r = dev->tuner->exit(dev); /* deinitialize tuner */
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	/* poweroff demodulator and ADCs */
+	rtlsdr_write_reg(dev, SYSB, DEMOD_CTL, 0x20, 1);
+
+	return r;
+}
+
+static int rtlsdr_set_if_freq(rtlsdr_dev_t *dev, uint32_t freq)
+{
+	uint32_t rtl_xtal;
+	int32_t if_freq;
+	uint8_t tmp;
+	int r;
+
+	if (!dev)
+		return -1;
+
+	/* read corrected clock value */
+	if (rtlsdr_get_xtal_freq(dev, &rtl_xtal, NULL))
+		return -2;
+
+	if_freq = ((freq * TWO_POW(22)) / rtl_xtal) * (-1);
+
+	tmp = (if_freq >> 16) & 0x3f;
+	r = rtlsdr_demod_write_reg(dev, 1, 0x19, tmp, 1);
+	tmp = (if_freq >> 8) & 0xff;
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x1a, tmp, 1);
+	tmp = if_freq & 0xff;
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x1b, tmp, 1);
+
+	return r;
+}
+
+int rtlsdr_set_sample_freq_correction(rtlsdr_dev_t *dev, int ppm)
+{
+	int r = 0;
+	uint8_t tmp;
+	int16_t offs = ppm * (-1) * TWO_POW(24) / 1000000;
+
+	tmp = offs & 0xff;
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x3f, tmp, 1);
+	tmp = (offs >> 8) & 0x3f;
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x3e, tmp, 1);
+
+	return r;
+}
+
+int rtlsdr_set_xtal_freq(rtlsdr_dev_t *dev, uint32_t rtl_freq, uint32_t tuner_freq)
+{
+	int r = 0;
+
+	if (!dev)
+		return -1;
+
+	if (rtl_freq > 0 &&
+		(rtl_freq < MIN_RTL_XTAL_FREQ || rtl_freq > MAX_RTL_XTAL_FREQ))
+		return -2;
+
+	if (rtl_freq > 0 && dev->rtl_xtal != rtl_freq) {
+		dev->rtl_xtal = rtl_freq;
+
+		/* update xtal-dependent settings */
+		if (dev->rate)
+			r = rtlsdr_set_sample_rate(dev, dev->rate);
+	}
+
+	if (dev->tun_xtal != tuner_freq) {
+		if (0 == tuner_freq)
+			dev->tun_xtal = dev->rtl_xtal;
+		else
+			dev->tun_xtal = tuner_freq;
+
+		/* read corrected clock value into e4k and r82xx structure */
+		if (rtlsdr_get_xtal_freq(dev, NULL, &dev->e4k_s.vco.fosc) ||
+		    rtlsdr_get_xtal_freq(dev, NULL, &dev->r82xx_c.xtal))
+			return -3;
+
+		/* update xtal-dependent settings */
+		if (dev->freq)
+			r = rtlsdr_set_center_freq(dev, dev->freq);
+	}
+
+	return r;
+}
+
+int rtlsdr_get_xtal_freq(rtlsdr_dev_t *dev, uint32_t *rtl_freq, uint32_t *tuner_freq)
+{
+	if (!dev)
+		return -1;
+
+	#define APPLY_PPM_CORR(val,ppm) (((val) * (1.0 + (ppm) / 1e6)))
+
+	if (rtl_freq)
+		*rtl_freq = (uint32_t) APPLY_PPM_CORR(dev->rtl_xtal, dev->corr);
+
+	if (tuner_freq)
+		*tuner_freq = (uint32_t) APPLY_PPM_CORR(dev->tun_xtal, dev->corr);
+
+	return 0;
+}
+
+int rtlsdr_get_usb_strings(rtlsdr_dev_t *dev, char *manufact, char *product,
+			    char *serial)
+{
+	struct libusb_device_descriptor dd;
+	libusb_device *device = NULL;
+	const int buf_max = 256;
+	int r = 0;
+
+	if (!dev || !dev->devh)
+		return -1;
+
+	device = libusb_get_device(dev->devh);
+
+	r = libusb_get_device_descriptor(device, &dd);
+	if (r < 0)
+		return -1;
+
+	if (manufact) {
+		memset(manufact, 0, buf_max);
+		libusb_get_string_descriptor_ascii(dev->devh, dd.iManufacturer,
+						   (unsigned char *)manufact,
+						   buf_max);
+	}
+
+	if (product) {
+		memset(product, 0, buf_max);
+		libusb_get_string_descriptor_ascii(dev->devh, dd.iProduct,
+						   (unsigned char *)product,
+						   buf_max);
+	}
+
+	if (serial) {
+		memset(serial, 0, buf_max);
+		libusb_get_string_descriptor_ascii(dev->devh, dd.iSerialNumber,
+						   (unsigned char *)serial,
+						   buf_max);
+	}
+
+	return 0;
+}
+
+int rtlsdr_write_eeprom(rtlsdr_dev_t *dev, uint8_t *data, uint8_t offset, uint16_t len)
+{
+	int r = 0;
+	int i;
+	uint8_t cmd[2];
+
+	if (!dev)
+		return -1;
+
+	if ((len + offset) > 256)
+		return -2;
+
+	for (i = 0; i < len; i++) {
+		cmd[0] = i + offset;
+		r = rtlsdr_write_array(dev, IICB, EEPROM_ADDR, cmd, 1);
+		r = rtlsdr_read_array(dev, IICB, EEPROM_ADDR, &cmd[1], 1);
+
+		/* only write the byte if it differs */
+		if (cmd[1] == data[i])
+			continue;
+
+		cmd[1] = data[i];
+		r = rtlsdr_write_array(dev, IICB, EEPROM_ADDR, cmd, 2);
+		if (r != sizeof(cmd))
+			return -3;
+
+		/* for some EEPROMs (e.g. ATC 240LC02) we need a delay
+		 * between write operations, otherwise they will fail */
+#ifdef _WIN32
+		Sleep(5);
+#else
+		usleep(5000);
+#endif
+	}
+
+	return 0;
+}
+
+int rtlsdr_read_eeprom(rtlsdr_dev_t *dev, uint8_t *data, uint8_t offset, uint16_t len)
+{
+	int r = 0;
+	int i;
+
+	if (!dev)
+		return -1;
+
+	if ((len + offset) > 256)
+		return -2;
+
+	r = rtlsdr_write_array(dev, IICB, EEPROM_ADDR, &offset, 1);
+	if (r < 0)
+		return -3;
+
+	for (i = 0; i < len; i++) {
+		r = rtlsdr_read_array(dev, IICB, EEPROM_ADDR, data + i, 1);
+
+		if (r < 0)
+			return -3;
+	}
+
+	return r;
+}
+
+int rtlsdr_set_center_freq(rtlsdr_dev_t *dev, uint32_t freq)
+{
+	int r = -1;
+
+	if (!dev || !dev->tuner)
+		return -1;
+
+	if (dev->direct_sampling) {
+		r = rtlsdr_set_if_freq(dev, freq);
+	} else if (dev->tuner && dev->tuner->set_freq) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		r = dev->tuner->set_freq(dev, freq - dev->offs_freq);
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	if (!r)
+		dev->freq = freq;
+	else
+		dev->freq = 0;
+
+	return r;
+}
+
+uint32_t rtlsdr_get_center_freq(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return 0;
+
+	return dev->freq;
+}
+
+int rtlsdr_set_freq_correction(rtlsdr_dev_t *dev, int ppm)
+{
+	int r = 0;
+
+	if (!dev)
+		return -1;
+
+	if (dev->corr == ppm)
+		return -2;
+
+	dev->corr = ppm;
+
+	r |= rtlsdr_set_sample_freq_correction(dev, ppm);
+
+	/* read corrected clock value into e4k and r82xx structure */
+	if (rtlsdr_get_xtal_freq(dev, NULL, &dev->e4k_s.vco.fosc) ||
+	    rtlsdr_get_xtal_freq(dev, NULL, &dev->r82xx_c.xtal))
+		return -3;
+
+	if (dev->freq) /* retune to apply new correction value */
+		r |= rtlsdr_set_center_freq(dev, dev->freq);
+
+	return r;
+}
+
+int rtlsdr_get_freq_correction(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return 0;
+
+	return dev->corr;
+}
+
+enum rtlsdr_tuner rtlsdr_get_tuner_type(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return RTLSDR_TUNER_UNKNOWN;
+
+	return dev->tuner_type;
+}
+
+int rtlsdr_get_tuner_gains(rtlsdr_dev_t *dev, int *gains)
+{
+	/* all gain values are expressed in tenths of a dB */
+	const int e4k_gains[] = { -10, 15, 40, 65, 90, 115, 140, 165, 190, 215,
+				  240, 290, 340, 420 };
+	const int fc0012_gains[] = { -99, -40, 71, 179, 192 };
+	const int fc0013_gains[] = { -99, -73, -65, -63, -60, -58, -54, 58, 61,
+				       63, 65, 67, 68, 70, 71, 179, 181, 182,
+				       184, 186, 188, 191, 197 };
+	const int fc2580_gains[] = { 0 /* no gain values */ };
+	const int r82xx_gains[] = { 0, 9, 14, 27, 37, 77, 87, 125, 144, 157,
+				     166, 197, 207, 229, 254, 280, 297, 328,
+				     338, 364, 372, 386, 402, 421, 434, 439,
+				     445, 480, 496 };
+	const int unknown_gains[] = { 0 /* no gain values */ };
+
+	const int *ptr = NULL;
+	int len = 0;
+
+	if (!dev)
+		return -1;
+
+	switch (dev->tuner_type) {
+	case RTLSDR_TUNER_E4000:
+		ptr = e4k_gains; len = sizeof(e4k_gains);
+		break;
+	case RTLSDR_TUNER_FC0012:
+		ptr = fc0012_gains; len = sizeof(fc0012_gains);
+		break;
+	case RTLSDR_TUNER_FC0013:
+		ptr = fc0013_gains; len = sizeof(fc0013_gains);
+		break;
+	case RTLSDR_TUNER_FC2580:
+		ptr = fc2580_gains; len = sizeof(fc2580_gains);
+		break;
+	case RTLSDR_TUNER_R820T:
+	case RTLSDR_TUNER_R828D:
+		ptr = r82xx_gains; len = sizeof(r82xx_gains);
+		break;
+	default:
+		ptr = unknown_gains; len = sizeof(unknown_gains);
+		break;
+	}
+
+	if (!gains) { /* no buffer provided, just return the count */
+		return len / sizeof(int);
+	} else {
+		if (len)
+			memcpy(gains, ptr, len);
+
+		return len / sizeof(int);
+	}
+}
+
+int rtlsdr_set_tuner_bandwidth(rtlsdr_dev_t *dev, uint32_t bw)
+{
+	int r = 0;
+
+	if (!dev || !dev->tuner)
+		return -1;
+
+	if (dev->tuner->set_bw) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		r = dev->tuner->set_bw(dev, bw > 0 ? bw : dev->rate);
+		rtlsdr_set_i2c_repeater(dev, 0);
+		if (r)
+			return r;
+		dev->bw = bw;
+	}
+	return r;
+}
+
+int rtlsdr_set_tuner_gain(rtlsdr_dev_t *dev, int gain)
+{
+	int r = 0;
+
+	if (!dev || !dev->tuner)
+		return -1;
+
+	if (dev->tuner->set_gain) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		r = dev->tuner->set_gain((void *)dev, gain);
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	if (!r)
+		dev->gain = gain;
+	else
+		dev->gain = 0;
+
+	return r;
+}
+
+int rtlsdr_get_tuner_gain(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return 0;
+
+	return dev->gain;
+}
+
+int rtlsdr_set_tuner_if_gain(rtlsdr_dev_t *dev, int stage, int gain)
+{
+	int r = 0;
+
+	if (!dev || !dev->tuner)
+		return -1;
+
+	if (dev->tuner->set_if_gain) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		r = dev->tuner->set_if_gain(dev, stage, gain);
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	return r;
+}
+
+int rtlsdr_set_tuner_gain_mode(rtlsdr_dev_t *dev, int mode)
+{
+	int r = 0;
+
+	if (!dev || !dev->tuner)
+		return -1;
+
+	if (dev->tuner->set_gain_mode) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		r = dev->tuner->set_gain_mode((void *)dev, mode);
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	return r;
+}
+
+int rtlsdr_set_sample_rate(rtlsdr_dev_t *dev, uint32_t samp_rate)
+{
+	int r = 0;
+	uint16_t tmp;
+	uint32_t rsamp_ratio, real_rsamp_ratio;
+	double real_rate;
+
+	if (!dev)
+		return -1;
+
+	/* check if the rate is supported by the resampler */
+	if ((samp_rate <= 225000) || (samp_rate > 3200000) ||
+	   ((samp_rate > 300000) && (samp_rate <= 900000))) {
+		fprintf(stderr, "Invalid sample rate: %u Hz\n", samp_rate);
+		return -EINVAL;
+	}
+
+	rsamp_ratio = (dev->rtl_xtal * TWO_POW(22)) / samp_rate;
+	rsamp_ratio &= 0x0ffffffc;
+
+	real_rsamp_ratio = rsamp_ratio | ((rsamp_ratio & 0x08000000) << 1);
+	real_rate = (dev->rtl_xtal * TWO_POW(22)) / real_rsamp_ratio;
+
+	if ( ((double)samp_rate) != real_rate )
+		fprintf(stderr, "Exact sample rate is: %f Hz\n", real_rate);
+
+	dev->rate = (uint32_t)real_rate;
+
+	if (dev->tuner && dev->tuner->set_bw) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		dev->tuner->set_bw(dev, dev->bw > 0 ? dev->bw : dev->rate);
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	tmp = (rsamp_ratio >> 16);
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x9f, tmp, 2);
+	tmp = rsamp_ratio & 0xffff;
+	r |= rtlsdr_demod_write_reg(dev, 1, 0xa1, tmp, 2);
+
+	r |= rtlsdr_set_sample_freq_correction(dev, dev->corr);
+
+	/* reset demod (bit 3, soft_rst) */
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x01, 0x14, 1);
+	r |= rtlsdr_demod_write_reg(dev, 1, 0x01, 0x10, 1);
+
+	/* recalculate offset frequency if offset tuning is enabled */
+	if (dev->offs_freq)
+		rtlsdr_set_offset_tuning(dev, 1);
+
+	return r;
+}
+
+uint32_t rtlsdr_get_sample_rate(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return 0;
+
+	return dev->rate;
+}
+
+int rtlsdr_set_testmode(rtlsdr_dev_t *dev, int on)
+{
+	if (!dev)
+		return -1;
+
+	return rtlsdr_demod_write_reg(dev, 0, 0x19, on ? 0x03 : 0x05, 1);
+}
+
+int rtlsdr_set_agc_mode(rtlsdr_dev_t *dev, int on)
+{
+	if (!dev)
+		return -1;
+
+	return rtlsdr_demod_write_reg(dev, 0, 0x19, on ? 0x25 : 0x05, 1);
+}
+
+int rtlsdr_set_direct_sampling(rtlsdr_dev_t *dev, int on)
+{
+	int r = 0;
+
+	if (!dev)
+		return -1;
+
+	if (on) {
+		if (dev->tuner && dev->tuner->exit) {
+			rtlsdr_set_i2c_repeater(dev, 1);
+			r = dev->tuner->exit(dev);
+			rtlsdr_set_i2c_repeater(dev, 0);
+		}
+
+		/* disable Zero-IF mode */
+		r |= rtlsdr_demod_write_reg(dev, 1, 0xb1, 0x1a, 1);
+
+		/* disable spectrum inversion */
+		r |= rtlsdr_demod_write_reg(dev, 1, 0x15, 0x00, 1);
+
+		/* only enable In-phase ADC input */
+		r |= rtlsdr_demod_write_reg(dev, 0, 0x08, 0x4d, 1);
+
+		/* swap I and Q ADC, this allows to select between two inputs */
+		r |= rtlsdr_demod_write_reg(dev, 0, 0x06, (on > 1) ? 0x90 : 0x80, 1);
+
+		fprintf(stderr, "Enabled direct sampling mode, input %i\n", on);
+		dev->direct_sampling = on;
+	} else {
+		if (dev->tuner && dev->tuner->init) {
+			rtlsdr_set_i2c_repeater(dev, 1);
+			r |= dev->tuner->init(dev);
+			rtlsdr_set_i2c_repeater(dev, 0);
+		}
+
+		if ((dev->tuner_type == RTLSDR_TUNER_R820T) ||
+		    (dev->tuner_type == RTLSDR_TUNER_R828D)) {
+			r |= rtlsdr_set_if_freq(dev, R82XX_IF_FREQ);
+
+			/* enable spectrum inversion */
+			r |= rtlsdr_demod_write_reg(dev, 1, 0x15, 0x01, 1);
+		} else {
+			r |= rtlsdr_set_if_freq(dev, 0);
+
+			/* enable In-phase + Quadrature ADC input */
+			r |= rtlsdr_demod_write_reg(dev, 0, 0x08, 0xcd, 1);
+
+			/* Enable Zero-IF mode */
+			r |= rtlsdr_demod_write_reg(dev, 1, 0xb1, 0x1b, 1);
+		}
+
+		/* opt_adc_iq = 0, default ADC_I/ADC_Q datapath */
+		r |= rtlsdr_demod_write_reg(dev, 0, 0x06, 0x80, 1);
+
+		fprintf(stderr, "Disabled direct sampling mode\n");
+		dev->direct_sampling = 0;
+	}
+
+	r |= rtlsdr_set_center_freq(dev, dev->freq);
+
+	return r;
+}
+
+int rtlsdr_get_direct_sampling(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return -1;
+
+	return dev->direct_sampling;
+}
+
+int rtlsdr_set_offset_tuning(rtlsdr_dev_t *dev, int on)
+{
+	int r = 0;
+	int bw;
+
+	if (!dev)
+		return -1;
+
+	if ((dev->tuner_type == RTLSDR_TUNER_R820T) ||
+	    (dev->tuner_type == RTLSDR_TUNER_R828D))
+		return -2;
+
+	if (dev->direct_sampling)
+		return -3;
+
+	/* based on keenerds 1/f noise measurements */
+	dev->offs_freq = on ? ((dev->rate / 2) * 170 / 100) : 0;
+	r |= rtlsdr_set_if_freq(dev, dev->offs_freq);
+
+	if (dev->tuner && dev->tuner->set_bw) {
+		rtlsdr_set_i2c_repeater(dev, 1);
+		if (on) {
+			bw = 2 * dev->offs_freq;
+		} else if (dev->bw > 0) {
+			bw = dev->bw;
+		} else {
+			bw = dev->rate;
+		}
+		dev->tuner->set_bw(dev, bw);
+		rtlsdr_set_i2c_repeater(dev, 0);
+	}
+
+	if (dev->freq > dev->offs_freq)
+		r |= rtlsdr_set_center_freq(dev, dev->freq);
+
+	return r;
+}
+
+int rtlsdr_get_offset_tuning(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return -1;
+
+	return (dev->offs_freq) ? 1 : 0;
+}
+
+static rtlsdr_dongle_t *find_known_device(uint16_t vid, uint16_t pid)
+{
+	unsigned int i;
+	rtlsdr_dongle_t *device = NULL;
+
+	for (i = 0; i < sizeof(known_devices)/sizeof(rtlsdr_dongle_t); i++ ) {
+		if (known_devices[i].vid == vid && known_devices[i].pid == pid) {
+			device = &known_devices[i];
+			break;
+		}
+	}
+
+	return device;
+}
+
+uint32_t rtlsdr_get_device_count(void)
+{
+	int i,r;
+	libusb_context *ctx;
+	libusb_device **list;
+	uint32_t device_count = 0;
+	struct libusb_device_descriptor dd;
+	ssize_t cnt;
+
+	r = libusb_init(&ctx);
+	if(r < 0)
+		return 0;
+
+	cnt = libusb_get_device_list(ctx, &list);
+
+	for (i = 0; i < cnt; i++) {
+		libusb_get_device_descriptor(list[i], &dd);
+
+		if (find_known_device(dd.idVendor, dd.idProduct))
+			device_count++;
+	}
+
+	libusb_free_device_list(list, 1);
+
+	libusb_exit(ctx);
+
+	return device_count;
+}
+
+const char *rtlsdr_get_device_name(uint32_t index)
+{
+	int i,r;
+	libusb_context *ctx;
+	libusb_device **list;
+	struct libusb_device_descriptor dd;
+	rtlsdr_dongle_t *device = NULL;
+	uint32_t device_count = 0;
+	ssize_t cnt;
+
+	r = libusb_init(&ctx);
+	if(r < 0)
+		return "";
+
+	cnt = libusb_get_device_list(ctx, &list);
+
+	for (i = 0; i < cnt; i++) {
+		libusb_get_device_descriptor(list[i], &dd);
+
+		device = find_known_device(dd.idVendor, dd.idProduct);
+
+		if (device) {
+			device_count++;
+
+			if (index == device_count - 1)
+				break;
+		}
+	}
+
+	libusb_free_device_list(list, 1);
+
+	libusb_exit(ctx);
+
+	if (device)
+		return device->name;
+	else
+		return "";
+}
+
+int rtlsdr_get_device_usb_strings(uint32_t index, char *manufact,
+				   char *product, char *serial)
+{
+	int r = -2;
+	int i;
+	libusb_context *ctx;
+	libusb_device **list;
+	struct libusb_device_descriptor dd;
+	rtlsdr_dongle_t *device = NULL;
+	rtlsdr_dev_t devt;
+	uint32_t device_count = 0;
+	ssize_t cnt;
+
+	r = libusb_init(&ctx);
+	if(r < 0)
+		return r;
+
+	cnt = libusb_get_device_list(ctx, &list);
+
+	for (i = 0; i < cnt; i++) {
+		libusb_get_device_descriptor(list[i], &dd);
+
+		device = find_known_device(dd.idVendor, dd.idProduct);
+
+		if (device) {
+			device_count++;
+
+			if (index == device_count - 1) {
+				r = libusb_open(list[i], &devt.devh);
+				if (!r) {
+					r = rtlsdr_get_usb_strings(&devt,
+								   manufact,
+								   product,
+								   serial);
+					libusb_close(devt.devh);
+				}
+				break;
+			}
+		}
+	}
+
+	libusb_free_device_list(list, 1);
+
+	libusb_exit(ctx);
+
+	return r;
+}
+
+int rtlsdr_get_index_by_serial(const char *serial)
+{
+	int i, cnt, r;
+	char str[256];
+
+	if (!serial)
+		return -1;
+
+	cnt = rtlsdr_get_device_count();
+
+	if (!cnt)
+		return -2;
+
+	for (i = 0; i < cnt; i++) {
+		r = rtlsdr_get_device_usb_strings(i, NULL, NULL, str);
+		if (!r && !strcmp(serial, str))
+			return i;
+	}
+
+	return -3;
+}
+
+int rtlsdr_open(rtlsdr_dev_t **out_dev, uint32_t index)
+{
+	int r;
+	int i;
+	libusb_device **list;
+	rtlsdr_dev_t *dev = NULL;
+	libusb_device *device = NULL;
+	uint32_t device_count = 0;
+	struct libusb_device_descriptor dd;
+	uint8_t reg;
+	ssize_t cnt;
+
+	dev = malloc(sizeof(rtlsdr_dev_t));
+	if (NULL == dev)
+		return -ENOMEM;
+
+	memset(dev, 0, sizeof(rtlsdr_dev_t));
+	memcpy(dev->fir, fir_default, sizeof(fir_default));
+
+	r = libusb_init(&dev->ctx);
+	if(r < 0){
+		free(dev);
+		return -1;
+	}
+
+	dev->dev_lost = 1;
+
+	cnt = libusb_get_device_list(dev->ctx, &list);
+
+	for (i = 0; i < cnt; i++) {
+		device = list[i];
+
+		libusb_get_device_descriptor(list[i], &dd);
+
+		if (find_known_device(dd.idVendor, dd.idProduct)) {
+			device_count++;
+		}
+
+		if (index == device_count - 1)
+			break;
+
+		device = NULL;
+	}
+
+	if (!device) {
+		r = -1;
+		goto err;
+	}
+
+	r = libusb_open(device, &dev->devh);
+	if (r < 0) {
+		libusb_free_device_list(list, 1);
+		fprintf(stderr, "usb_open error %d\n", r);
+		if(r == LIBUSB_ERROR_ACCESS)
+			fprintf(stderr, "Please fix the device permissions, e.g. "
+			"by installing the udev rules file rtl-sdr.rules\n");
+		goto err;
+	}
+
+	libusb_free_device_list(list, 1);
+
+	if (libusb_kernel_driver_active(dev->devh, 0) == 1) {
+		dev->driver_active = 1;
+
+#ifdef DETACH_KERNEL_DRIVER
+		if (!libusb_detach_kernel_driver(dev->devh, 0)) {
+			fprintf(stderr, "Detached kernel driver\n");
+		} else {
+			fprintf(stderr, "Detaching kernel driver failed!");
+			goto err;
+		}
+#else
+		fprintf(stderr, "\nKernel driver is active, or device is "
+				"claimed by second instance of librtlsdr."
+				"\nIn the first case, please either detach"
+				" or blacklist the kernel module\n"
+				"(dvb_usb_rtl28xxu), or enable automatic"
+				" detaching at compile time.\n\n");
+#endif
+	}
+
+	r = libusb_claim_interface(dev->devh, 0);
+	if (r < 0) {
+		fprintf(stderr, "usb_claim_interface error %d\n", r);
+		goto err;
+	}
+
+	dev->rtl_xtal = DEF_RTL_XTAL_FREQ;
+
+	/* perform a dummy write, if it fails, reset the device */
+	if (rtlsdr_write_reg(dev, USBB, USB_SYSCTL, 0x09, 1) < 0) {
+		fprintf(stderr, "Resetting device...\n");
+		libusb_reset_device(dev->devh);
+	}
+
+	rtlsdr_init_baseband(dev);
+	dev->dev_lost = 0;
+
+	/* Probe tuners */
+	rtlsdr_set_i2c_repeater(dev, 1);
+
+	reg = rtlsdr_i2c_read_reg(dev, E4K_I2C_ADDR, E4K_CHECK_ADDR);
+	if (reg == E4K_CHECK_VAL) {
+		fprintf(stderr, "Found Elonics E4000 tuner\n");
+		dev->tuner_type = RTLSDR_TUNER_E4000;
+		goto found;
+	}
+
+	reg = rtlsdr_i2c_read_reg(dev, FC0013_I2C_ADDR, FC0013_CHECK_ADDR);
+	if (reg == FC0013_CHECK_VAL) {
+		fprintf(stderr, "Found Fitipower FC0013 tuner\n");
+		dev->tuner_type = RTLSDR_TUNER_FC0013;
+		goto found;
+	}
+
+	reg = rtlsdr_i2c_read_reg(dev, R820T_I2C_ADDR, R82XX_CHECK_ADDR);
+	if (reg == R82XX_CHECK_VAL) {
+		fprintf(stderr, "Found Rafael Micro R820T tuner\n");
+		dev->tuner_type = RTLSDR_TUNER_R820T;
+		goto found;
+	}
+
+	reg = rtlsdr_i2c_read_reg(dev, R828D_I2C_ADDR, R82XX_CHECK_ADDR);
+	if (reg == R82XX_CHECK_VAL) {
+		fprintf(stderr, "Found Rafael Micro R828D tuner\n");
+		dev->tuner_type = RTLSDR_TUNER_R828D;
+		goto found;
+	}
+
+	/* initialise GPIOs */
+	rtlsdr_set_gpio_output(dev, 4);
+
+	/* reset tuner before probing */
+	rtlsdr_set_gpio_bit(dev, 4, 1);
+	rtlsdr_set_gpio_bit(dev, 4, 0);
+
+	reg = rtlsdr_i2c_read_reg(dev, FC2580_I2C_ADDR, FC2580_CHECK_ADDR);
+	if ((reg & 0x7f) == FC2580_CHECK_VAL) {
+		fprintf(stderr, "Found FCI 2580 tuner\n");
+		dev->tuner_type = RTLSDR_TUNER_FC2580;
+		goto found;
+	}
+
+	reg = rtlsdr_i2c_read_reg(dev, FC0012_I2C_ADDR, FC0012_CHECK_ADDR);
+	if (reg == FC0012_CHECK_VAL) {
+		fprintf(stderr, "Found Fitipower FC0012 tuner\n");
+		rtlsdr_set_gpio_output(dev, 6);
+		dev->tuner_type = RTLSDR_TUNER_FC0012;
+		goto found;
+	}
+
+found:
+	/* use the rtl clock value by default */
+	dev->tun_xtal = dev->rtl_xtal;
+	dev->tuner = &tuners[dev->tuner_type];
+
+	switch (dev->tuner_type) {
+	case RTLSDR_TUNER_R828D:
+		dev->tun_xtal = R828D_XTAL_FREQ;
+		/* fall-through */
+	case RTLSDR_TUNER_R820T:
+		/* disable Zero-IF mode */
+		rtlsdr_demod_write_reg(dev, 1, 0xb1, 0x1a, 1);
+
+		/* only enable In-phase ADC input */
+		rtlsdr_demod_write_reg(dev, 0, 0x08, 0x4d, 1);
+
+		/* the R82XX use 3.57 MHz IF for the DVB-T 6 MHz mode, and
+		 * 4.57 MHz for the 8 MHz mode */
+		rtlsdr_set_if_freq(dev, R82XX_IF_FREQ);
+
+		/* enable spectrum inversion */
+		rtlsdr_demod_write_reg(dev, 1, 0x15, 0x01, 1);
+		break;
+	case RTLSDR_TUNER_UNKNOWN:
+		fprintf(stderr, "No supported tuner found\n");
+		rtlsdr_set_direct_sampling(dev, 1);
+		break;
+	default:
+		break;
+	}
+
+	if (dev->tuner->init)
+		r = dev->tuner->init(dev);
+
+	rtlsdr_set_i2c_repeater(dev, 0);
+
+	*out_dev = dev;
+
+	return 0;
+err:
+	if (dev) {
+		if (dev->devh)
+			libusb_close(dev->devh);
+
+		if (dev->ctx)
+			libusb_exit(dev->ctx);
+
+		free(dev);
+	}
+
+	return r;
+}
+
+int rtlsdr_close(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return -1;
+
+	if(!dev->dev_lost) {
+		/* block until all async operations have been completed (if any) */
+		while (RTLSDR_INACTIVE != dev->async_status) {
+#ifdef _WIN32
+			Sleep(1);
+#else
+			usleep(1000);
+#endif
+		}
+
+		rtlsdr_deinit_baseband(dev);
+	}
+
+	libusb_release_interface(dev->devh, 0);
+
+#ifdef DETACH_KERNEL_DRIVER
+	if (dev->driver_active) {
+		if (!libusb_attach_kernel_driver(dev->devh, 0))
+			fprintf(stderr, "Reattached kernel driver\n");
+		else
+			fprintf(stderr, "Reattaching kernel driver failed!\n");
+	}
+#endif
+
+	libusb_close(dev->devh);
+
+	libusb_exit(dev->ctx);
+
+	free(dev);
+
+	return 0;
+}
+
+int rtlsdr_reset_buffer(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return -1;
+
+	rtlsdr_write_reg(dev, USBB, USB_EPA_CTL, 0x1002, 2);
+	rtlsdr_write_reg(dev, USBB, USB_EPA_CTL, 0x0000, 2);
+
+	return 0;
+}
+
+int rtlsdr_read_sync(rtlsdr_dev_t *dev, void *buf, int len, int *n_read)
+{
+	if (!dev)
+		return -1;
+
+	return libusb_bulk_transfer(dev->devh, 0x81, buf, len, n_read, BULK_TIMEOUT);
+}
+
+static void LIBUSB_CALL _libusb_callback(struct libusb_transfer *xfer)
+{
+	rtlsdr_dev_t *dev = (rtlsdr_dev_t *)xfer->user_data;
+
+	if (LIBUSB_TRANSFER_COMPLETED == xfer->status) {
+		if (dev->cb)
+			dev->cb(xfer->buffer, xfer->actual_length, dev->cb_ctx);
+
+		libusb_submit_transfer(xfer); /* resubmit transfer */
+		dev->xfer_errors = 0;
+	} else if (LIBUSB_TRANSFER_CANCELLED != xfer->status) {
+#ifndef _WIN32
+		if (LIBUSB_TRANSFER_ERROR == xfer->status)
+			dev->xfer_errors++;
+
+		if (dev->xfer_errors >= dev->xfer_buf_num ||
+		    LIBUSB_TRANSFER_NO_DEVICE == xfer->status) {
+#endif
+			dev->dev_lost = 1;
+			rtlsdr_cancel_async(dev);
+			fprintf(stderr, "cb transfer status: %d, "
+				"canceling...\n", xfer->status);
+#ifndef _WIN32
+		}
+#endif
+	}
+}
+
+int rtlsdr_wait_async(rtlsdr_dev_t *dev, rtlsdr_read_async_cb_t cb, void *ctx)
+{
+	return rtlsdr_read_async(dev, cb, ctx, 0, 0);
+}
+
+static int _rtlsdr_alloc_async_buffers(rtlsdr_dev_t *dev)
+{
+	unsigned int i;
+
+	if (!dev)
+		return -1;
+
+	if (!dev->xfer) {
+		dev->xfer = malloc(dev->xfer_buf_num *
+				   sizeof(struct libusb_transfer *));
+
+		for(i = 0; i < dev->xfer_buf_num; ++i)
+			dev->xfer[i] = libusb_alloc_transfer(0);
+	}
+
+	if (dev->xfer_buf)
+		return -2;
+
+	dev->xfer_buf = malloc(dev->xfer_buf_num * sizeof(unsigned char *));
+	memset(dev->xfer_buf, 0, dev->xfer_buf_num * sizeof(unsigned char *));
+
+#if defined(ENABLE_ZEROCOPY) && defined (__linux__) && LIBUSB_API_VERSION >= 0x01000105
+	fprintf(stderr, "Allocating %d zero-copy buffers\n", dev->xfer_buf_num);
+
+	dev->use_zerocopy = 1;
+	for (i = 0; i < dev->xfer_buf_num; ++i) {
+		dev->xfer_buf[i] = libusb_dev_mem_alloc(dev->devh, dev->xfer_buf_len);
+
+		if (dev->xfer_buf[i]) {
+			/* Check if Kernel usbfs mmap() bug is present: if the
+			 * mapping is correct, the buffers point to memory that
+			 * was memset to 0 by the Kernel, otherwise, they point
+			 * to random memory. We check if the buffers are zeroed
+			 * and otherwise fall back to buffers in userspace.
+			 */
+			if (dev->xfer_buf[i][0] || memcmp(dev->xfer_buf[i],
+							  dev->xfer_buf[i] + 1,
+							  dev->xfer_buf_len - 1)) {
+				fprintf(stderr, "Detected Kernel usbfs mmap() "
+						"bug, falling back to buffers "
+						"in userspace\n");
+				dev->use_zerocopy = 0;
+				break;
+			}
+		} else {
+			fprintf(stderr, "Failed to allocate zero-copy "
+					"buffer for transfer %d\nFalling "
+					"back to buffers in userspace\n", i);
+			dev->use_zerocopy = 0;
+			break;
+		}
+	}
+
+	/* zero-copy buffer allocation failed (partially or completely)
+	 * we need to free the buffers again if already allocated */
+	if (!dev->use_zerocopy) {
+		for (i = 0; i < dev->xfer_buf_num; ++i) {
+			if (dev->xfer_buf[i])
+				libusb_dev_mem_free(dev->devh,
+						    dev->xfer_buf[i],
+						    dev->xfer_buf_len);
+		}
+	}
+#endif
+
+	/* no zero-copy available, allocate buffers in userspace */
+	if (!dev->use_zerocopy) {
+		for (i = 0; i < dev->xfer_buf_num; ++i) {
+			dev->xfer_buf[i] = malloc(dev->xfer_buf_len);
+
+			if (!dev->xfer_buf[i])
+				return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static int _rtlsdr_free_async_buffers(rtlsdr_dev_t *dev)
+{
+	unsigned int i;
+
+	if (!dev)
+		return -1;
+
+	if (dev->xfer) {
+		for(i = 0; i < dev->xfer_buf_num; ++i) {
+			if (dev->xfer[i]) {
+				libusb_free_transfer(dev->xfer[i]);
+			}
+		}
+
+		free(dev->xfer);
+		dev->xfer = NULL;
+	}
+
+	if (dev->xfer_buf) {
+		for (i = 0; i < dev->xfer_buf_num; ++i) {
+			if (dev->xfer_buf[i]) {
+				if (dev->use_zerocopy) {
+#if defined (__linux__) && LIBUSB_API_VERSION >= 0x01000105
+					libusb_dev_mem_free(dev->devh,
+							    dev->xfer_buf[i],
+							    dev->xfer_buf_len);
+#endif
+				} else {
+					free(dev->xfer_buf[i]);
+				}
+			}
+		}
+
+		free(dev->xfer_buf);
+		dev->xfer_buf = NULL;
+	}
+
+	return 0;
+}
+
+int rtlsdr_read_async(rtlsdr_dev_t *dev, rtlsdr_read_async_cb_t cb, void *ctx,
+			  uint32_t buf_num, uint32_t buf_len)
+{
+	unsigned int i;
+	int r = 0;
+	struct timeval tv = { 1, 0 };
+	struct timeval zerotv = { 0, 0 };
+	enum rtlsdr_async_status next_status = RTLSDR_INACTIVE;
+
+	if (!dev)
+		return -1;
+
+	if (RTLSDR_INACTIVE != dev->async_status)
+		return -2;
+
+	dev->async_status = RTLSDR_RUNNING;
+	dev->async_cancel = 0;
+
+	dev->cb = cb;
+	dev->cb_ctx = ctx;
+
+	if (buf_num > 0)
+		dev->xfer_buf_num = buf_num;
+	else
+		dev->xfer_buf_num = DEFAULT_BUF_NUMBER;
+
+	if (buf_len > 0 && buf_len % 512 == 0) /* len must be multiple of 512 */
+		dev->xfer_buf_len = buf_len;
+	else
+		dev->xfer_buf_len = DEFAULT_BUF_LENGTH;
+
+	_rtlsdr_alloc_async_buffers(dev);
+
+	for(i = 0; i < dev->xfer_buf_num; ++i) {
+		libusb_fill_bulk_transfer(dev->xfer[i],
+					  dev->devh,
+					  0x81,
+					  dev->xfer_buf[i],
+					  dev->xfer_buf_len,
+					  _libusb_callback,
+					  (void *)dev,
+					  BULK_TIMEOUT);
+
+		r = libusb_submit_transfer(dev->xfer[i]);
+		if (r < 0) {
+			fprintf(stderr, "Failed to submit transfer %i\n"
+					"Please increase your allowed " 
+					"usbfs buffer size with the "
+					"following command:\n"
+					"echo 0 > /sys/module/usbcore"
+					"/parameters/usbfs_memory_mb\n", i);
+			dev->async_status = RTLSDR_CANCELING;
+			break;
+		}
+	}
+
+	while (RTLSDR_INACTIVE != dev->async_status) {
+		r = libusb_handle_events_timeout_completed(dev->ctx, &tv,
+							   &dev->async_cancel);
+		if (r < 0) {
+			/*fprintf(stderr, "handle_events returned: %d\n", r);*/
+			if (r == LIBUSB_ERROR_INTERRUPTED) /* stray signal */
+				continue;
+			break;
+		}
+
+		if (RTLSDR_CANCELING == dev->async_status) {
+			next_status = RTLSDR_INACTIVE;
+
+			if (!dev->xfer)
+				break;
+
+			for(i = 0; i < dev->xfer_buf_num; ++i) {
+				if (!dev->xfer[i])
+					continue;
+
+				if (LIBUSB_TRANSFER_CANCELLED !=
+						dev->xfer[i]->status) {
+					r = libusb_cancel_transfer(dev->xfer[i]);
+					/* handle events after canceling
+					 * to allow transfer status to
+					 * propagate */
+#ifdef _WIN32
+					Sleep(1);
+#endif
+					libusb_handle_events_timeout_completed(dev->ctx,
+									       &zerotv, NULL);
+					if (r < 0)
+						continue;
+
+					next_status = RTLSDR_CANCELING;
+				}
+			}
+
+			if (dev->dev_lost || RTLSDR_INACTIVE == next_status) {
+				/* handle any events that still need to
+				 * be handled before exiting after we
+				 * just cancelled all transfers */
+				libusb_handle_events_timeout_completed(dev->ctx,
+								       &zerotv, NULL);
+				break;
+			}
+		}
+	}
+
+	_rtlsdr_free_async_buffers(dev);
+
+	dev->async_status = next_status;
+
+	return r;
+}
+
+int rtlsdr_cancel_async(rtlsdr_dev_t *dev)
+{
+	if (!dev)
+		return -1;
+
+	/* if streaming, try to cancel gracefully */
+	if (RTLSDR_RUNNING == dev->async_status) {
+		dev->async_status = RTLSDR_CANCELING;
+		dev->async_cancel = 1;
+		return 0;
+	}
+
+	/* if called while in pending state, change the state forcefully */
+#if 0
+	if (RTLSDR_INACTIVE != dev->async_status) {
+		dev->async_status = RTLSDR_INACTIVE;
+		return 0;
+	}
+#endif
+	return -2;
+}
+
+uint32_t rtlsdr_get_tuner_clock(void *dev)
+{
+	uint32_t tuner_freq;
+
+	if (!dev)
+		return 0;
+
+	/* read corrected clock value */
+	if (rtlsdr_get_xtal_freq((rtlsdr_dev_t *)dev, NULL, &tuner_freq))
+		return 0;
+
+	return tuner_freq;
+}
+
+int rtlsdr_i2c_write_fn(void *dev, uint8_t addr, uint8_t *buf, int len)
+{
+	if (dev)
+		return rtlsdr_i2c_write(((rtlsdr_dev_t *)dev), addr, buf, len);
+
+	return -1;
+}
+
+int rtlsdr_i2c_read_fn(void *dev, uint8_t addr, uint8_t *buf, int len)
+{
+	if (dev)
+		return rtlsdr_i2c_read(((rtlsdr_dev_t *)dev), addr, buf, len);
+
+	return -1;
+}
+
+int rtlsdr_set_bias_tee_gpio(rtlsdr_dev_t *dev, int gpio, int on)
+{
+	if (!dev)
+		return -1;
+
+	rtlsdr_set_gpio_output(dev, gpio);
+	rtlsdr_set_gpio_bit(dev, gpio, on);
+
+	return 0;
+}
+
+int rtlsdr_set_bias_tee(rtlsdr_dev_t *dev, int on)
+{
+	return rtlsdr_set_bias_tee_gpio(dev, 0, on);
+}
diff --git a/Radio/HW/RtlSdr/r820/src/r820sdr-Bridging-Header.h b/Radio/HW/RtlSdr/r820/src/r820sdr-Bridging-Header.h
new file mode 100644
index 0000000..fd7a194
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/r820sdr-Bridging-Header.h
@@ -0,0 +1,5 @@
+//
+//  Use this file to import your target's public headers that you would like to expose to Swift.
+//
+
+#include "../include/rtl-sdr.h"
diff --git a/Radio/HW/RtlSdr/r820/src/test.swift b/Radio/HW/RtlSdr/r820/src/test.swift
new file mode 100644
index 0000000..f35c146
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/test.swift
@@ -0,0 +1,17 @@
+//
+//  test.swift
+//  PrySDR
+//
+//  Created by Jacky Jack on 01/11/2024.
+//
+
+import Foundation
+
+
+final class r820sdr {
+    let deviceCounr = rtlsdr_get_device_count()
+    //r820sdr.rtlsdr_get_device_count()
+    //libusb_open(1, 1);
+    //r82xx
+}
+
diff --git a/Radio/HW/RtlSdr/r820/src/tuner_e4k.c b/Radio/HW/RtlSdr/r820/src/tuner_e4k.c
new file mode 100644
index 0000000..e4fb11e
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/tuner_e4k.c
@@ -0,0 +1,1000 @@
+/*
+ * Elonics E4000 tuner driver
+ *
+ * (C) 2011-2012 by Harald Welte <laforge@gnumonks.org>
+ * (C) 2012 by Sylvain Munaut <tnt@246tNt.com>
+ * (C) 2012 by Hoernchen <la@tfc-server.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <limits.h>
+#include <stdint.h>
+#include <errno.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <reg_field.h>
+#include <tuner_e4k.h>
+#include <rtlsdr_i2c.h>
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+/* If this is defined, the limits are somewhat relaxed compared to what the
+ * vendor claims is possible */
+#define OUT_OF_SPEC
+
+#define MHZ(x)	((x)*1000*1000)
+#define KHZ(x)	((x)*1000)
+
+uint32_t unsigned_delta(uint32_t a, uint32_t b)
+{
+	if (a > b)
+		return a - b;
+	else
+		return b - a;
+}
+
+/* look-up table bit-width -> mask */
+static const uint8_t width2mask[] = {
+	0, 1, 3, 7, 0xf, 0x1f, 0x3f, 0x7f, 0xff
+};
+
+/***********************************************************************
+ * Register Access */
+
+/*! \brief Write a register of the tuner chip
+ *  \param[in] e4k reference to the tuner
+ *  \param[in] reg number of the register
+ *  \param[in] val value to be written
+ *  \returns 0 on success, negative in case of error
+ */
+static int e4k_reg_write(struct e4k_state *e4k, uint8_t reg, uint8_t val)
+{
+	int r;
+	uint8_t data[2];
+	data[0] = reg;
+	data[1] = val;
+
+	r = rtlsdr_i2c_write_fn(e4k->rtl_dev, e4k->i2c_addr, data, 2);
+	return r == 2 ? 0 : -1;
+}
+
+/*! \brief Read a register of the tuner chip
+ *  \param[in] e4k reference to the tuner
+ *  \param[in] reg number of the register
+ *  \returns positive 8bit register contents on success, negative in case of error
+ */
+static int e4k_reg_read(struct e4k_state *e4k, uint8_t reg)
+{
+	uint8_t data = reg;
+
+	if (rtlsdr_i2c_write_fn(e4k->rtl_dev, e4k->i2c_addr, &data, 1) < 1)
+		return -1;
+
+	if (rtlsdr_i2c_read_fn(e4k->rtl_dev, e4k->i2c_addr, &data, 1) < 1)
+		return -1;
+
+	return data;
+}
+
+/*! \brief Set or clear some (masked) bits inside a register
+ *  \param[in] e4k reference to the tuner
+ *  \param[in] reg number of the register
+ *  \param[in] mask bit-mask of the value
+ *  \param[in] val data value to be written to register
+ *  \returns 0 on success, negative in case of error
+ */
+static int e4k_reg_set_mask(struct e4k_state *e4k, uint8_t reg,
+		     uint8_t mask, uint8_t val)
+{
+	uint8_t tmp = e4k_reg_read(e4k, reg);
+
+	if ((tmp & mask) == val)
+		return 0;
+
+	return e4k_reg_write(e4k, reg, (tmp & ~mask) | (val & mask));
+}
+
+/*! \brief Write a given field inside a register
+ *  \param[in] e4k reference to the tuner
+ *  \param[in] field structure describing the field
+ *  \param[in] val value to be written
+ *  \returns 0 on success, negative in case of error
+ */
+static int e4k_field_write(struct e4k_state *e4k, const struct reg_field *field, uint8_t val)
+{
+	int rc;
+	uint8_t mask;
+
+	rc = e4k_reg_read(e4k, field->reg);
+	if (rc < 0)
+		return rc;
+
+	mask = width2mask[field->width] << field->shift;
+
+	return e4k_reg_set_mask(e4k, field->reg, mask, val << field->shift);
+}
+
+/*! \brief Read a given field inside a register
+ *  \param[in] e4k reference to the tuner
+ *  \param[in] field structure describing the field
+ *  \returns positive value of the field, negative in case of error
+ */
+static int e4k_field_read(struct e4k_state *e4k, const struct reg_field *field)
+{
+	int rc;
+
+	rc = e4k_reg_read(e4k, field->reg);
+	if (rc < 0)
+		return rc;
+
+	rc = (rc >> field->shift) & width2mask[field->width];
+
+	return rc;
+}
+
+/***********************************************************************
+ * Filter Control */
+
+static const uint32_t rf_filt_center_uhf[] = {
+	MHZ(360), MHZ(380), MHZ(405), MHZ(425),
+	MHZ(450), MHZ(475), MHZ(505), MHZ(540),
+	MHZ(575), MHZ(615), MHZ(670), MHZ(720),
+	MHZ(760), MHZ(840), MHZ(890), MHZ(970)
+};
+
+static const uint32_t rf_filt_center_l[] = {
+	MHZ(1300), MHZ(1320), MHZ(1360), MHZ(1410),
+	MHZ(1445), MHZ(1460), MHZ(1490), MHZ(1530),
+	MHZ(1560), MHZ(1590), MHZ(1640), MHZ(1660),
+	MHZ(1680), MHZ(1700), MHZ(1720), MHZ(1750)
+};
+
+static int closest_arr_idx(const uint32_t *arr, unsigned int arr_size, uint32_t freq)
+{
+	unsigned int i, bi = 0;
+	uint32_t best_delta = 0xffffffff;
+
+	/* iterate over the array containing a list of the center
+	 * frequencies, selecting the closest one */
+	for (i = 0; i < arr_size; i++) {
+		uint32_t delta = unsigned_delta(freq, arr[i]);
+		if (delta < best_delta) {
+			best_delta = delta;
+			bi = i;
+		}
+	}
+
+	return bi;
+}
+
+/* return 4-bit index as to which RF filter to select */
+static int choose_rf_filter(enum e4k_band band, uint32_t freq)
+{
+	int rc;
+
+	switch (band) {
+		case E4K_BAND_VHF2:
+		case E4K_BAND_VHF3:
+			rc = 0;
+			break;
+		case E4K_BAND_UHF:
+			rc = closest_arr_idx(rf_filt_center_uhf,
+						 ARRAY_SIZE(rf_filt_center_uhf),
+						 freq);
+			break;
+		case E4K_BAND_L:
+			rc = closest_arr_idx(rf_filt_center_l,
+						 ARRAY_SIZE(rf_filt_center_l),
+						 freq);
+			break;
+		default:
+			rc = -EINVAL;
+			break;
+	}
+
+	return rc;
+}
+
+/* \brief Automatically select apropriate RF filter based on e4k state */
+int e4k_rf_filter_set(struct e4k_state *e4k)
+{
+	int rc;
+
+	rc = choose_rf_filter(e4k->band, e4k->vco.flo);
+	if (rc < 0)
+		return rc;
+
+	return e4k_reg_set_mask(e4k, E4K_REG_FILT1, 0xF, rc);
+}
+
+/* Mixer Filter */
+static const uint32_t mix_filter_bw[] = {
+	KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000),
+	KHZ(27000), KHZ(27000), KHZ(27000), KHZ(27000),
+	KHZ(4600), KHZ(4200), KHZ(3800), KHZ(3400),
+	KHZ(3300), KHZ(2700), KHZ(2300), KHZ(1900)
+};
+
+/* IF RC Filter */
+static const uint32_t ifrc_filter_bw[] = {
+	KHZ(21400), KHZ(21000), KHZ(17600), KHZ(14700),
+	KHZ(12400), KHZ(10600), KHZ(9000), KHZ(7700),
+	KHZ(6400), KHZ(5300), KHZ(4400), KHZ(3400),
+	KHZ(2600), KHZ(1800), KHZ(1200), KHZ(1000)
+};
+
+/* IF Channel Filter */
+static const uint32_t ifch_filter_bw[] = {
+	KHZ(5500), KHZ(5300), KHZ(5000), KHZ(4800),
+	KHZ(4600), KHZ(4400), KHZ(4300), KHZ(4100),
+	KHZ(3900), KHZ(3800), KHZ(3700), KHZ(3600),
+	KHZ(3400), KHZ(3300), KHZ(3200), KHZ(3100),
+	KHZ(3000), KHZ(2950), KHZ(2900), KHZ(2800),
+	KHZ(2750), KHZ(2700), KHZ(2600), KHZ(2550),
+	KHZ(2500), KHZ(2450), KHZ(2400), KHZ(2300),
+	KHZ(2280), KHZ(2240), KHZ(2200), KHZ(2150)
+};
+
+static const uint32_t *if_filter_bw[] = {
+	mix_filter_bw,
+	ifch_filter_bw,
+	ifrc_filter_bw,
+};
+
+static const uint32_t if_filter_bw_len[] = {
+	ARRAY_SIZE(mix_filter_bw),
+	ARRAY_SIZE(ifch_filter_bw),
+	ARRAY_SIZE(ifrc_filter_bw),
+};
+
+static const struct reg_field if_filter_fields[] = {
+	{
+		E4K_REG_FILT2, 4, 4,
+	},
+	{
+		E4K_REG_FILT3, 0, 5,
+	},
+	{
+		E4K_REG_FILT2, 0, 4,
+	}
+};
+
+static int find_if_bw(enum e4k_if_filter filter, uint32_t bw)
+{
+	if (filter >= ARRAY_SIZE(if_filter_bw))
+		return -EINVAL;
+
+	return closest_arr_idx(if_filter_bw[filter],
+			       if_filter_bw_len[filter], bw);
+}
+
+/*! \brief Set the filter band-width of any of the IF filters
+ *  \param[in] e4k reference to the tuner chip
+ *  \param[in] filter filter to be configured
+ *  \param[in] bandwidth bandwidth to be configured
+ *  \returns positive actual filter band-width, negative in case of error
+ */
+int e4k_if_filter_bw_set(struct e4k_state *e4k, enum e4k_if_filter filter,
+		         uint32_t bandwidth)
+{
+	int bw_idx;
+	const struct reg_field *field;
+
+	if (filter >= ARRAY_SIZE(if_filter_bw))
+		return -EINVAL;
+
+	bw_idx = find_if_bw(filter, bandwidth);
+
+	field = &if_filter_fields[filter];
+
+	return e4k_field_write(e4k, field, bw_idx);
+}
+
+/*! \brief Enables / Disables the channel filter
+ *  \param[in] e4k reference to the tuner chip
+ *  \param[in] on 1=filter enabled, 0=filter disabled
+ *  \returns 0 success, negative errors
+ */
+int e4k_if_filter_chan_enable(struct e4k_state *e4k, int on)
+{
+	return e4k_reg_set_mask(e4k, E4K_REG_FILT3, E4K_FILT3_DISABLE,
+	                        on ? 0 : E4K_FILT3_DISABLE);
+}
+
+int e4k_if_filter_bw_get(struct e4k_state *e4k, enum e4k_if_filter filter)
+{
+	const uint32_t *arr;
+	int rc;
+	const struct reg_field *field;
+
+	if (filter >= ARRAY_SIZE(if_filter_bw))
+		return -EINVAL;
+
+	field = &if_filter_fields[filter];
+
+	rc = e4k_field_read(e4k, field);
+	if (rc < 0)
+		return rc;
+
+	arr = if_filter_bw[filter];
+
+	return arr[rc];
+}
+
+
+/***********************************************************************
+ * Frequency Control */
+
+#define E4K_FVCO_MIN_KHZ	2600000	/* 2.6 GHz */
+#define E4K_FVCO_MAX_KHZ	3900000	/* 3.9 GHz */
+#define E4K_PLL_Y		65536
+
+#ifdef OUT_OF_SPEC
+#define E4K_FLO_MIN_MHZ		50
+#define E4K_FLO_MAX_MHZ		2200UL
+#else
+#define E4K_FLO_MIN_MHZ		64
+#define E4K_FLO_MAX_MHZ		1700
+#endif
+
+struct pll_settings {
+	uint32_t freq;
+	uint8_t reg_synth7;
+	uint8_t mult;
+};
+
+static const struct pll_settings pll_vars[] = {
+	{KHZ(72400),	(1 << 3) | 7,	48},
+	{KHZ(81200),	(1 << 3) | 6,	40},
+	{KHZ(108300),	(1 << 3) | 5,	32},
+	{KHZ(162500),	(1 << 3) | 4,	24},
+	{KHZ(216600),	(1 << 3) | 3,	16},
+	{KHZ(325000),	(1 << 3) | 2,	12},
+	{KHZ(350000),	(1 << 3) | 1,	8},
+	{KHZ(432000),	(0 << 3) | 3,	8},
+	{KHZ(667000),	(0 << 3) | 2,	6},
+	{KHZ(1200000),	(0 << 3) | 1,	4}
+};
+
+static int is_fvco_valid(uint32_t fvco_z)
+{
+	/* check if the resulting fosc is valid */
+	if (fvco_z/1000 < E4K_FVCO_MIN_KHZ ||
+	    fvco_z/1000 > E4K_FVCO_MAX_KHZ) {
+		fprintf(stderr, "[E4K] Fvco %u invalid\n", fvco_z);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_fosc_valid(uint32_t fosc)
+{
+	if (fosc < MHZ(16) || fosc > MHZ(30)) {
+		fprintf(stderr, "[E4K] Fosc %u invalid\n", fosc);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_z_valid(uint32_t z)
+{
+	if (z > 255) {
+		fprintf(stderr, "[E4K] Z %u invalid\n", z);
+		return 0;
+	}
+
+	return 1;
+}
+
+/*! \brief Determine if 3-phase mixing shall be used or not */
+static int use_3ph_mixing(uint32_t flo)
+{
+	/* this is a magic number somewhre between VHF and UHF */
+	if (flo < MHZ(350))
+		return 1;
+
+	return 0;
+}
+
+/* \brief compute Fvco based on Fosc, Z and X
+ * \returns positive value (Fvco in Hz), 0 in case of error */
+static uint64_t compute_fvco(uint32_t f_osc, uint8_t z, uint16_t x)
+{
+	uint64_t fvco_z, fvco_x, fvco;
+
+	/* We use the following transformation in order to
+	 * handle the fractional part with integer arithmetic:
+	 *  Fvco = Fosc * (Z + X/Y) <=> Fvco = Fosc * Z + (Fosc * X)/Y
+	 * This avoids X/Y = 0.  However, then we would overflow a 32bit
+	 * integer, as we cannot hold e.g. 26 MHz * 65536 either.
+	 */
+	fvco_z = (uint64_t)f_osc * z;
+
+#if 0
+	if (!is_fvco_valid(fvco_z))
+		return 0;
+#endif
+
+	fvco_x = ((uint64_t)f_osc * x) / E4K_PLL_Y;
+
+	fvco = fvco_z + fvco_x;
+
+	return fvco;
+}
+
+static uint32_t compute_flo(uint32_t f_osc, uint8_t z, uint16_t x, uint8_t r)
+{
+	uint64_t fvco = compute_fvco(f_osc, z, x);
+	if (fvco == 0)
+		return -EINVAL;
+
+	return fvco / r;
+}
+
+static int e4k_band_set(struct e4k_state *e4k, enum e4k_band band)
+{
+	int rc;
+
+	switch (band) {
+	case E4K_BAND_VHF2:
+	case E4K_BAND_VHF3:
+	case E4K_BAND_UHF:
+		e4k_reg_write(e4k, E4K_REG_BIAS, 3);
+		break;
+	case E4K_BAND_L:
+		e4k_reg_write(e4k, E4K_REG_BIAS, 0);
+		break;
+	}
+
+	/* workaround: if we don't reset this register before writing to it,
+	 * we get a gap between 325-350 MHz */
+	rc = e4k_reg_set_mask(e4k, E4K_REG_SYNTH1, 0x06, 0);
+	rc = e4k_reg_set_mask(e4k, E4K_REG_SYNTH1, 0x06, band << 1);
+	if (rc >= 0)
+		e4k->band = band;
+
+	return rc;
+}
+
+/*! \brief Compute PLL parameters for givent target frequency
+ *  \param[out] oscp Oscillator parameters, if computation successful
+ *  \param[in] fosc Clock input frequency applied to the chip (Hz)
+ *  \param[in] intended_flo target tuning frequency (Hz)
+ *  \returns actual PLL frequency, as close as possible to intended_flo,
+ *	     0 in case of error
+ */
+uint32_t e4k_compute_pll_params(struct e4k_pll_params *oscp, uint32_t fosc, uint32_t intended_flo)
+{
+	uint32_t i;
+	uint8_t r = 2;
+	uint64_t intended_fvco, remainder;
+	uint64_t z = 0;
+	uint32_t x;
+	int flo;
+	int three_phase_mixing = 0;
+	oscp->r_idx = 0;
+
+	if (!is_fosc_valid(fosc))
+		return 0;
+
+	for(i = 0; i < ARRAY_SIZE(pll_vars); ++i) {
+		if(intended_flo < pll_vars[i].freq) {
+			three_phase_mixing = (pll_vars[i].reg_synth7 & 0x08) ? 1 : 0;
+			oscp->r_idx = pll_vars[i].reg_synth7;
+			r = pll_vars[i].mult;
+			break;
+		}
+	}
+
+	//fprintf(stderr, "[E4K] Fint=%u, R=%u\n", intended_flo, r);
+
+	/* flo(max) = 1700MHz, R(max) = 48, we need 64bit! */
+	intended_fvco = (uint64_t)intended_flo * r;
+
+	/* compute integral component of multiplier */
+	z = intended_fvco / fosc;
+
+	/* compute fractional part.  this will not overflow,
+	* as fosc(max) = 30MHz and z(max) = 255 */
+	remainder = intended_fvco - (fosc * z);
+	/* remainder(max) = 30MHz, E4K_PLL_Y = 65536 -> 64bit! */
+	x = (remainder * E4K_PLL_Y) / fosc;
+	/* x(max) as result of this computation is 65536 */
+
+	flo = compute_flo(fosc, z, x, r);
+
+	oscp->fosc = fosc;
+	oscp->flo = flo;
+	oscp->intended_flo = intended_flo;
+	oscp->r = r;
+//	oscp->r_idx = pll_vars[i].reg_synth7 & 0x0;
+	oscp->threephase = three_phase_mixing;
+	oscp->x = x;
+	oscp->z = z;
+
+	return flo;
+}
+
+int e4k_tune_params(struct e4k_state *e4k, struct e4k_pll_params *p)
+{
+	/* program R + 3phase/2phase */
+	e4k_reg_write(e4k, E4K_REG_SYNTH7, p->r_idx);
+	/* program Z */
+	e4k_reg_write(e4k, E4K_REG_SYNTH3, p->z);
+	/* program X */
+	e4k_reg_write(e4k, E4K_REG_SYNTH4, p->x & 0xff);
+	e4k_reg_write(e4k, E4K_REG_SYNTH5, p->x >> 8);
+
+	/* we're in auto calibration mode, so there's no need to trigger it */
+
+	memcpy(&e4k->vco, p, sizeof(e4k->vco));
+
+	/* set the band */
+	if (e4k->vco.flo < MHZ(140))
+		e4k_band_set(e4k, E4K_BAND_VHF2);
+	else if (e4k->vco.flo < MHZ(350))
+		e4k_band_set(e4k, E4K_BAND_VHF3);
+	else if (e4k->vco.flo < MHZ(1135))
+		e4k_band_set(e4k, E4K_BAND_UHF);
+	else
+		e4k_band_set(e4k, E4K_BAND_L);
+
+	/* select and set proper RF filter */
+	e4k_rf_filter_set(e4k);
+
+	return e4k->vco.flo;
+}
+
+/*! \brief High-level tuning API, just specify frquency
+ *
+ *  This function will compute matching PLL parameters, program them into the
+ *  hardware and set the band as well as RF filter.
+ *
+ *  \param[in] e4k reference to tuner
+ *  \param[in] freq frequency in Hz
+ *  \returns actual tuned frequency, negative in case of error
+ */
+int e4k_tune_freq(struct e4k_state *e4k, uint32_t freq)
+{
+	uint32_t rc;
+	struct e4k_pll_params p;
+
+	/* determine PLL parameters */
+	rc = e4k_compute_pll_params(&p, e4k->vco.fosc, freq);
+	if (!rc)
+		return -EINVAL;
+
+	/* actually tune to those parameters */
+	rc = e4k_tune_params(e4k, &p);
+
+	/* check PLL lock */
+	rc = e4k_reg_read(e4k, E4K_REG_SYNTH1);
+	if (!(rc & 0x01)) {
+		fprintf(stderr, "[E4K] PLL not locked for %u Hz!\n", freq);
+		return -1;
+	}
+
+	return 0;
+}
+
+/***********************************************************************
+ * Gain Control */
+
+static const int8_t if_stage1_gain[] = {
+	-3, 6
+};
+
+static const int8_t if_stage23_gain[] = {
+	0, 3, 6, 9
+};
+
+static const int8_t if_stage4_gain[] = {
+	0, 1, 2, 2
+};
+
+static const int8_t if_stage56_gain[] = {
+	3, 6, 9, 12, 15, 15, 15, 15
+};
+
+static const int8_t *if_stage_gain[] = {
+	0,
+	if_stage1_gain,
+	if_stage23_gain,
+	if_stage23_gain,
+	if_stage4_gain,
+	if_stage56_gain,
+	if_stage56_gain
+};
+
+static const uint8_t if_stage_gain_len[] = {
+	0,
+	ARRAY_SIZE(if_stage1_gain),
+	ARRAY_SIZE(if_stage23_gain),
+	ARRAY_SIZE(if_stage23_gain),
+	ARRAY_SIZE(if_stage4_gain),
+	ARRAY_SIZE(if_stage56_gain),
+	ARRAY_SIZE(if_stage56_gain)
+};
+
+static const struct reg_field if_stage_gain_regs[] = {
+	{ 0, 0, 0 },
+	{ E4K_REG_GAIN3, 0, 1 },
+	{ E4K_REG_GAIN3, 1, 2 },
+	{ E4K_REG_GAIN3, 3, 2 },
+	{ E4K_REG_GAIN3, 5, 2 },
+	{ E4K_REG_GAIN4, 0, 3 },
+	{ E4K_REG_GAIN4, 3, 3 }
+};
+
+static const int32_t lnagain[] = {
+	-50,	0,
+	-25,	1,
+	0,	4,
+	25,	5,
+	50,	6,
+	75,	7,
+	100,	8,
+	125,	9,
+	150,	10,
+	175,	11,
+	200,	12,
+	250,	13,
+	300,	14,
+};
+
+static const int32_t enhgain[] = {
+	10, 30, 50, 70
+};
+
+int e4k_set_lna_gain(struct e4k_state *e4k, int32_t gain)
+{
+	uint32_t i;
+	for(i = 0; i < ARRAY_SIZE(lnagain)/2; ++i) {
+		if(lnagain[i*2] == gain) {
+			e4k_reg_set_mask(e4k, E4K_REG_GAIN1, 0xf, lnagain[i*2+1]);
+			return gain;
+		}
+	}
+	return -EINVAL;
+}
+
+int e4k_set_enh_gain(struct e4k_state *e4k, int32_t gain)
+{
+	uint32_t i;
+	for(i = 0; i < ARRAY_SIZE(enhgain); ++i) {
+		if(enhgain[i] == gain) {
+			e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, E4K_AGC11_LNA_GAIN_ENH | (i << 1));
+			return gain;
+		}
+	}
+	e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, 0);
+
+	/* special case: 0 = off*/
+	if(0 == gain)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+int e4k_enable_manual_gain(struct e4k_state *e4k, uint8_t manual)
+{
+	if (manual) {
+		/* Set LNA mode to manual */
+		e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK, E4K_AGC_MOD_SERIAL);
+
+		/* Set Mixer Gain Control to manual */
+		e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 0);
+	} else {
+		/* Set LNA mode to auto */
+		e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK, E4K_AGC_MOD_IF_SERIAL_LNA_AUTON);
+		/* Set Mixer Gain Control to auto */
+		e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 1);
+
+		e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7, 0);
+	}
+
+	return 0;
+}
+
+static int find_stage_gain(uint8_t stage, int8_t val)
+{
+	const int8_t *arr;
+	int i;
+
+	if (stage >= ARRAY_SIZE(if_stage_gain))
+		return -EINVAL;
+
+	arr = if_stage_gain[stage];
+
+	for (i = 0; i < if_stage_gain_len[stage]; i++) {
+		if (arr[i] == val)
+			return i;
+	}
+	return -EINVAL;
+}
+
+/*! \brief Set the gain of one of the IF gain stages
+ *  \param e4k handle to the tuner chip
+ *  \param stage number of the stage (1..6)
+ *  \param value gain value in dB
+ *  \returns 0 on success, negative in case of error
+ */
+int e4k_if_gain_set(struct e4k_state *e4k, uint8_t stage, int8_t value)
+{
+	int rc;
+	uint8_t mask;
+	const struct reg_field *field;
+
+	rc = find_stage_gain(stage, value);
+	if (rc < 0)
+		return rc;
+
+	/* compute the bit-mask for the given gain field */
+	field = &if_stage_gain_regs[stage];
+	mask = width2mask[field->width] << field->shift;
+
+	return e4k_reg_set_mask(e4k, field->reg, mask, rc << field->shift);
+}
+
+int e4k_mixer_gain_set(struct e4k_state *e4k, int8_t value)
+{
+	uint8_t bit;
+
+	switch (value) {
+	case 4:
+		bit = 0;
+		break;
+	case 12:
+		bit = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return e4k_reg_set_mask(e4k, E4K_REG_GAIN2, 1, bit);
+}
+
+int e4k_commonmode_set(struct e4k_state *e4k, int8_t value)
+{
+	if(value < 0)
+		return -EINVAL;
+	else if(value > 7)
+		return -EINVAL;
+
+	return e4k_reg_set_mask(e4k, E4K_REG_DC7, 7, value);
+}
+
+/***********************************************************************
+ * DC Offset */
+
+int e4k_manual_dc_offset(struct e4k_state *e4k, int8_t iofs, int8_t irange, int8_t qofs, int8_t qrange)
+{
+	int res;
+
+	if((iofs < 0x00) || (iofs > 0x3f))
+		return -EINVAL;
+	if((irange < 0x00) || (irange > 0x03))
+		return -EINVAL;
+	if((qofs < 0x00) || (qofs > 0x3f))
+		return -EINVAL;
+	if((qrange < 0x00) || (qrange > 0x03))
+		return -EINVAL;
+
+	res = e4k_reg_set_mask(e4k, E4K_REG_DC2, 0x3f, iofs);
+	if(res < 0)
+		return res;
+
+	res = e4k_reg_set_mask(e4k, E4K_REG_DC3, 0x3f, qofs);
+	if(res < 0)
+		return res;
+
+	res = e4k_reg_set_mask(e4k, E4K_REG_DC4, 0x33, (qrange << 4) | irange);
+	return res;
+}
+
+/*! \brief Perform a DC offset calibration right now
+ *  \param [e4k] handle to the tuner chip
+ */
+int e4k_dc_offset_calibrate(struct e4k_state *e4k)
+{
+	/* make sure the DC range detector is enabled */
+	e4k_reg_set_mask(e4k, E4K_REG_DC5, E4K_DC5_RANGE_DET_EN, E4K_DC5_RANGE_DET_EN);
+
+	return e4k_reg_write(e4k, E4K_REG_DC1, 0x01);
+}
+
+
+static const int8_t if_gains_max[] = {
+	0, 6, 9, 9, 2, 15, 15
+};
+
+struct gain_comb {
+	int8_t mixer_gain;
+	int8_t if1_gain;
+	uint8_t reg;
+};
+
+static const struct gain_comb dc_gain_comb[] = {
+	{ 4,  -3, 0x50 },
+	{ 4,   6, 0x51 },
+	{ 12, -3, 0x52 },
+	{ 12,  6, 0x53 },
+};
+
+#define TO_LUT(offset, range)	(offset | (range << 6))
+
+int e4k_dc_offset_gen_table(struct e4k_state *e4k)
+{
+	uint32_t i;
+
+	/* FIXME: read ont current gain values and write them back
+	 * before returning to the caller */
+
+	/* disable auto mixer gain */
+	e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 0);
+
+	/* set LNA/IF gain to full manual */
+	e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK,
+			 E4K_AGC_MOD_SERIAL);
+
+	/* set all 'other' gains to maximum */
+	for (i = 2; i <= 6; i++)
+		e4k_if_gain_set(e4k, i, if_gains_max[i]);
+
+	/* iterate over all mixer + if_stage_1 gain combinations */
+	for (i = 0; i < ARRAY_SIZE(dc_gain_comb); i++) {
+		uint8_t offs_i, offs_q, range, range_i, range_q;
+
+		/* set the combination of mixer / if1 gain */
+		e4k_mixer_gain_set(e4k, dc_gain_comb[i].mixer_gain);
+		e4k_if_gain_set(e4k, 1, dc_gain_comb[i].if1_gain);
+
+		/* perform actual calibration */
+		e4k_dc_offset_calibrate(e4k);
+
+		/* extract I/Q offset and range values */
+		offs_i = e4k_reg_read(e4k, E4K_REG_DC2) & 0x3f;
+		offs_q = e4k_reg_read(e4k, E4K_REG_DC3) & 0x3f;
+		range  = e4k_reg_read(e4k, E4K_REG_DC4);
+		range_i = range & 0x3;
+		range_q = (range >> 4) & 0x3;
+
+		fprintf(stderr, "[E4K] Table %u I=%u/%u, Q=%u/%u\n",
+			i, range_i, offs_i, range_q, offs_q);
+
+		/* write into the table */
+		e4k_reg_write(e4k, dc_gain_comb[i].reg,
+			      TO_LUT(offs_q, range_q));
+		e4k_reg_write(e4k, dc_gain_comb[i].reg + 0x10,
+			      TO_LUT(offs_i, range_i));
+	}
+
+	return 0;
+}
+
+/***********************************************************************
+ * Standby */
+
+/*! \brief Enable/disable standby mode
+ */
+int e4k_standby(struct e4k_state *e4k, int enable)
+{
+	e4k_reg_set_mask(e4k, E4K_REG_MASTER1, E4K_MASTER1_NORM_STBY,
+			 enable ? 0 : E4K_MASTER1_NORM_STBY);
+
+	return 0;
+}
+
+/***********************************************************************
+ * Initialization */
+
+static int magic_init(struct e4k_state *e4k)
+{
+	e4k_reg_write(e4k, 0x7e, 0x01);
+	e4k_reg_write(e4k, 0x7f, 0xfe);
+	e4k_reg_write(e4k, 0x82, 0x00);
+	e4k_reg_write(e4k, 0x86, 0x50);	/* polarity A */
+	e4k_reg_write(e4k, 0x87, 0x20);
+	e4k_reg_write(e4k, 0x88, 0x01);
+	e4k_reg_write(e4k, 0x9f, 0x7f);
+	e4k_reg_write(e4k, 0xa0, 0x07);
+
+	return 0;
+}
+
+/*! \brief Initialize the E4K tuner
+ */
+int e4k_init(struct e4k_state *e4k)
+{
+	/* make a dummy i2c read or write command, will not be ACKed! */
+	e4k_reg_read(e4k, 0);
+
+	/* Make sure we reset everything and clear POR indicator */
+	e4k_reg_write(e4k, E4K_REG_MASTER1,
+		E4K_MASTER1_RESET |
+		E4K_MASTER1_NORM_STBY |
+		E4K_MASTER1_POR_DET
+	);
+
+	/* Configure clock input */
+	e4k_reg_write(e4k, E4K_REG_CLK_INP, 0x00);
+
+	/* Disable clock output */
+	e4k_reg_write(e4k, E4K_REG_REF_CLK, 0x00);
+	e4k_reg_write(e4k, E4K_REG_CLKOUT_PWDN, 0x96);
+
+	/* Write some magic values into registers */
+	magic_init(e4k);
+#if 0
+	/* Set common mode voltage a bit higher for more margin 850 mv */
+	e4k_commonmode_set(e4k, 4);
+
+	/* Initialize DC offset lookup tables */
+	e4k_dc_offset_gen_table(e4k);
+
+	/* Enable time variant DC correction */
+	e4k_reg_write(e4k, E4K_REG_DCTIME1, 0x01);
+	e4k_reg_write(e4k, E4K_REG_DCTIME2, 0x01);
+#endif
+
+	/* Set LNA mode to manual */
+	e4k_reg_write(e4k, E4K_REG_AGC4, 0x10); /* High threshold */
+	e4k_reg_write(e4k, E4K_REG_AGC5, 0x04);	/* Low threshold */
+	e4k_reg_write(e4k, E4K_REG_AGC6, 0x1a);	/* LNA calib + loop rate */
+
+	e4k_reg_set_mask(e4k, E4K_REG_AGC1, E4K_AGC1_MOD_MASK,
+		E4K_AGC_MOD_SERIAL);
+
+	/* Set Mixer Gain Control to manual */
+	e4k_reg_set_mask(e4k, E4K_REG_AGC7, E4K_AGC7_MIX_GAIN_AUTO, 0);
+
+#if 0
+	/* Enable LNA Gain enhancement */
+	e4k_reg_set_mask(e4k, E4K_REG_AGC11, 0x7,
+			 E4K_AGC11_LNA_GAIN_ENH | (2 << 1));
+
+	/* Enable automatic IF gain mode switching */
+	e4k_reg_set_mask(e4k, E4K_REG_AGC8, 0x1, E4K_AGC8_SENS_LIN_AUTO);
+#endif
+
+	/* Use auto-gain as default */
+	e4k_enable_manual_gain(e4k, 0);
+
+	/* Select moderate gain levels */
+	e4k_if_gain_set(e4k, 1, 6);
+	e4k_if_gain_set(e4k, 2, 0);
+	e4k_if_gain_set(e4k, 3, 0);
+	e4k_if_gain_set(e4k, 4, 0);
+	e4k_if_gain_set(e4k, 5, 9);
+	e4k_if_gain_set(e4k, 6, 9);
+
+	/* Set the most narrow filter we can possibly use */
+	e4k_if_filter_bw_set(e4k, E4K_IF_FILTER_MIX, KHZ(1900));
+	e4k_if_filter_bw_set(e4k, E4K_IF_FILTER_RC, KHZ(1000));
+	e4k_if_filter_bw_set(e4k, E4K_IF_FILTER_CHAN, KHZ(2150));
+	e4k_if_filter_chan_enable(e4k, 1);
+
+	/* Disable time variant DC correction and LUT */
+	e4k_reg_set_mask(e4k, E4K_REG_DC5, 0x03, 0);
+	e4k_reg_set_mask(e4k, E4K_REG_DCTIME1, 0x03, 0);
+	e4k_reg_set_mask(e4k, E4K_REG_DCTIME2, 0x03, 0);
+
+	return 0;
+}
diff --git a/Radio/HW/RtlSdr/r820/src/tuner_fc0012.c b/Radio/HW/RtlSdr/r820/src/tuner_fc0012.c
new file mode 100644
index 0000000..768cf1c
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/tuner_fc0012.c
@@ -0,0 +1,345 @@
+/*
+ * Fitipower FC0012 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ *
+ * modified for use in librtlsdr
+ * Copyright (C) 2012 Steve Markgraf <steve@steve-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+
+#include "rtlsdr_i2c.h"
+#include "tuner_fc0012.h"
+
+static int fc0012_writereg(void *dev, uint8_t reg, uint8_t val)
+{
+	uint8_t data[2];
+	data[0] = reg;
+	data[1] = val;
+
+	if (rtlsdr_i2c_write_fn(dev, FC0012_I2C_ADDR, data, 2) < 0)
+		return -1;
+
+	return 0;
+}
+
+static int fc0012_readreg(void *dev, uint8_t reg, uint8_t *val)
+{
+	uint8_t data = reg;
+
+	if (rtlsdr_i2c_write_fn(dev, FC0012_I2C_ADDR, &data, 1) < 0)
+		return -1;
+
+	if (rtlsdr_i2c_read_fn(dev, FC0012_I2C_ADDR, &data, 1) < 0)
+		return -1;
+
+	*val = data;
+
+	return 0;
+}
+
+/* Incomplete list of register settings:
+ *
+ * Name			Reg	Bits	Desc
+ * CHIP_ID		0x00	0-7	Chip ID (constant 0xA1)
+ * RF_A			0x01	0-3	Number of count-to-9 cycles in RF
+ *					divider (suggested: 2..9)
+ * RF_M			0x02	0-7	Total number of cycles (to-8 and to-9)
+ *					in RF divider
+ * RF_K_HIGH		0x03	0-6	Bits 8..14 of fractional divider
+ * RF_K_LOW		0x04	0-7	Bits 0..7 of fractional RF divider
+ * RF_OUTDIV_A		0x05	3-7	Power of two required?
+ * LNA_POWER_DOWN	0x06	0	Set to 1 to switch off low noise amp
+ * RF_OUTDIV_B		0x06	1	Set to select 3 instead of 2 for the
+ *					RF output divider
+ * VCO_SPEED		0x06	3	Select tuning range of VCO:
+ *					 0 = Low range, (ca. 1.1 - 1.5GHz)
+ *					 1 = High range (ca. 1.4 - 1.8GHz)
+ * BANDWIDTH		0x06	6-7	Set bandwidth. 6MHz = 0x80, 7MHz=0x40
+ *					8MHz=0x00
+ * XTAL_SPEED		0x07	5	Set to 1 for 28.8MHz Crystal input
+ *					or 0 for 36MHz
+ * <agc params>		0x08	0-7
+ * EN_CAL_RSSI		0x09	4 	Enable calibrate RSSI
+ *					(Receive Signal Strength Indicator)
+ * LNA_FORCE		0x0d	0
+ * AGC_FORCE		0x0d	?
+ * LNA_GAIN		0x13	3-4	Low noise amp gain
+ * LNA_COMPS		0x15	3	?
+ * VCO_CALIB		0x0e	7	Set high then low to calibrate VCO
+ *					 (fast lock?)
+ * VCO_VOLTAGE		0x0e	0-6	Read Control voltage of VCO
+ *					 (big value -> low freq)
+ */
+
+int fc0012_init(void *dev)
+{
+	int ret = 0;
+	unsigned int i;
+	uint8_t reg[] = {
+		0x00,	/* dummy reg. 0 */
+		0x05,	/* reg. 0x01 */
+		0x10,	/* reg. 0x02 */
+		0x00,	/* reg. 0x03 */
+		0x00,	/* reg. 0x04 */
+		0x0f,	/* reg. 0x05: may also be 0x0a */
+		0x00,	/* reg. 0x06: divider 2, VCO slow */
+		0x00,	/* reg. 0x07: may also be 0x0f */
+		0xff,	/* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
+			   Loop Bw 1/8 */
+		0x6e,	/* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
+		0xb8,	/* reg. 0x0a: Disable LO Test Buffer */
+		0x82,	/* reg. 0x0b: Output Clock is same as clock frequency,
+			   may also be 0x83 */
+		0xfc,	/* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
+		0x02,	/* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
+		0x00,	/* reg. 0x0e */
+		0x00,	/* reg. 0x0f */
+		0x00,	/* reg. 0x10: may also be 0x0d */
+		0x00,	/* reg. 0x11 */
+		0x1f,	/* reg. 0x12: Set to maximum gain */
+		0x08,	/* reg. 0x13: Set to Middle Gain: 0x08,
+			   Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
+		0x00,	/* reg. 0x14 */
+		0x04,	/* reg. 0x15: Enable LNA COMPS */
+	};
+
+#if 0
+	switch (rtlsdr_get_tuner_clock(dev)) {
+	case FC_XTAL_27_MHZ:
+	case FC_XTAL_28_8_MHZ:
+		reg[0x07] |= 0x20;
+		break;
+	case FC_XTAL_36_MHZ:
+	default:
+		break;
+	}
+#endif
+	reg[0x07] |= 0x20;
+
+//	if (priv->dual_master)
+	reg[0x0c] |= 0x02;
+
+	for (i = 1; i < sizeof(reg); i++) {
+		ret = fc0012_writereg(dev, i, reg[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+int fc0012_set_params(void *dev, uint32_t freq, uint32_t bandwidth)
+{
+	int i, ret = 0;
+	uint8_t reg[7], am, pm, multi, tmp;
+	uint64_t f_vco;
+	uint32_t xtal_freq_div_2;
+	uint16_t xin, xdiv;
+	int vco_select = 0;
+
+	xtal_freq_div_2 = rtlsdr_get_tuner_clock(dev) / 2;
+
+	/* select frequency divider and the frequency of VCO */
+	if (freq < 37084000) {		/* freq * 96 < 3560000000 */
+		multi = 96;
+		reg[5] = 0x82;
+		reg[6] = 0x00;
+	} else if (freq < 55625000) {	/* freq * 64 < 3560000000 */
+		multi = 64;
+		reg[5] = 0x82;
+		reg[6] = 0x02;
+	} else if (freq < 74167000) {	/* freq * 48 < 3560000000 */
+		multi = 48;
+		reg[5] = 0x42;
+		reg[6] = 0x00;
+	} else if (freq < 111250000) {	/* freq * 32 < 3560000000 */
+		multi = 32;
+		reg[5] = 0x42;
+		reg[6] = 0x02;
+	} else if (freq < 148334000) {	/* freq * 24 < 3560000000 */
+		multi = 24;
+		reg[5] = 0x22;
+		reg[6] = 0x00;
+	} else if (freq < 222500000) {	/* freq * 16 < 3560000000 */
+		multi = 16;
+		reg[5] = 0x22;
+		reg[6] = 0x02;
+	} else if (freq < 296667000) {	/* freq * 12 < 3560000000 */
+		multi = 12;
+		reg[5] = 0x12;
+		reg[6] = 0x00;
+	} else if (freq < 445000000) {	/* freq * 8 < 3560000000 */
+		multi = 8;
+		reg[5] = 0x12;
+		reg[6] = 0x02;
+	} else if (freq < 593334000) {	/* freq * 6 < 3560000000 */
+		multi = 6;
+		reg[5] = 0x0a;
+		reg[6] = 0x00;
+	} else {
+		multi = 4;
+		reg[5] = 0x0a;
+		reg[6] = 0x02;
+	}
+
+	f_vco = freq * multi;
+
+	if (f_vco >= 3060000000U) {
+		reg[6] |= 0x08;
+		vco_select = 1;
+	}
+
+	/* From divided value (XDIV) determined the FA and FP value */
+	xdiv = (uint16_t)(f_vco / xtal_freq_div_2);
+	if ((f_vco - xdiv * xtal_freq_div_2) >= (xtal_freq_div_2 / 2))
+		xdiv++;
+
+	pm = (uint8_t)(xdiv / 8);
+	am = (uint8_t)(xdiv - (8 * pm));
+
+	if (am < 2) {
+		am += 8;
+		pm--;
+	}
+
+	if (pm > 31) {
+		reg[1] = am + (8 * (pm - 31));
+		reg[2] = 31;
+	} else {
+		reg[1] = am;
+		reg[2] = pm;
+	}
+
+	if ((reg[1] > 15) || (reg[2] < 0x0b)) {
+		fprintf(stderr, "[FC0012] no valid PLL combination "
+				"found for %u Hz!\n", freq);
+		return -1;
+	}
+
+	/* fix clock out */
+	reg[6] |= 0x20;
+
+	/* From VCO frequency determines the XIN ( fractional part of Delta
+	   Sigma PLL) and divided value (XDIV) */
+	xin = (uint16_t)((f_vco - (f_vco / xtal_freq_div_2) * xtal_freq_div_2) / 1000);
+	xin = (xin << 15) / (xtal_freq_div_2 / 1000);
+	if (xin >= 16384)
+		xin += 32768;
+
+	reg[3] = xin >> 8;	/* xin with 9 bit resolution */
+	reg[4] = xin & 0xff;
+
+	reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
+	switch (bandwidth) {
+	case 6000000:
+		reg[6] |= 0x80;
+		break;
+	case 7000000:
+		reg[6] |= 0x40;
+		break;
+	case 8000000:
+	default:
+		break;
+	}
+
+	/* modified for Realtek demod */
+	reg[5] |= 0x07;
+
+	for (i = 1; i <= 6; i++) {
+		ret = fc0012_writereg(dev, i, reg[i]);
+		if (ret)
+			goto exit;
+	}
+
+	/* VCO Calibration */
+	ret = fc0012_writereg(dev, 0x0e, 0x80);
+	if (!ret)
+		ret = fc0012_writereg(dev, 0x0e, 0x00);
+
+	/* VCO Re-Calibration if needed */
+	if (!ret)
+		ret = fc0012_writereg(dev, 0x0e, 0x00);
+
+	if (!ret) {
+//		msleep(10);
+		ret = fc0012_readreg(dev, 0x0e, &tmp);
+	}
+	if (ret)
+		goto exit;
+
+	/* vco selection */
+	tmp &= 0x3f;
+
+	if (vco_select) {
+		if (tmp > 0x3c) {
+			reg[6] &= ~0x08;
+			ret = fc0012_writereg(dev, 0x06, reg[6]);
+			if (!ret)
+				ret = fc0012_writereg(dev, 0x0e, 0x80);
+			if (!ret)
+				ret = fc0012_writereg(dev, 0x0e, 0x00);
+		}
+	} else {
+		if (tmp < 0x02) {
+			reg[6] |= 0x08;
+			ret = fc0012_writereg(dev, 0x06, reg[6]);
+			if (!ret)
+				ret = fc0012_writereg(dev, 0x0e, 0x80);
+			if (!ret)
+				ret = fc0012_writereg(dev, 0x0e, 0x00);
+		}
+	}
+
+exit:
+	return ret;
+}
+
+int fc0012_set_gain(void *dev, int gain)
+{
+	int ret;
+	uint8_t tmp = 0;
+
+	ret = fc0012_readreg(dev, 0x13, &tmp);
+
+	/* mask bits off */
+	tmp &= 0xe0;
+
+	switch (gain) {
+	case -99:		/* -9.9 dB */
+		tmp |= 0x02;
+		break;
+	case -40:		/* -4 dB */
+		break;
+	case 71:
+		tmp |= 0x08;	/* 7.1 dB */
+		break;
+	case 179:
+		tmp |= 0x17;	/* 17.9 dB */
+		break;
+	case 192:
+	default:
+		tmp |= 0x10;	/* 19.2 dB */
+		break;
+	}
+
+	ret = fc0012_writereg(dev, 0x13, tmp);
+
+	return ret;
+}
diff --git a/Radio/HW/RtlSdr/r820/src/tuner_fc0013.c b/Radio/HW/RtlSdr/r820/src/tuner_fc0013.c
new file mode 100644
index 0000000..5984dfb
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/tuner_fc0013.c
@@ -0,0 +1,500 @@
+/*
+ * Fitipower FC0013 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ * partially based on driver code from Fitipower
+ * Copyright (C) 2010 Fitipower Integrated Technology Inc
+ *
+ * modified for use in librtlsdr
+ * Copyright (C) 2012 Steve Markgraf <steve@steve-m.de>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+
+#include "rtlsdr_i2c.h"
+#include "tuner_fc0013.h"
+
+static int fc0013_writereg(void *dev, uint8_t reg, uint8_t val)
+{
+	uint8_t data[2];
+	data[0] = reg;
+	data[1] = val;
+
+	if (rtlsdr_i2c_write_fn(dev, FC0013_I2C_ADDR, data, 2) < 0)
+		return -1;
+
+	return 0;
+}
+
+static int fc0013_readreg(void *dev, uint8_t reg, uint8_t *val)
+{
+	uint8_t data = reg;
+
+	if (rtlsdr_i2c_write_fn(dev, FC0013_I2C_ADDR, &data, 1) < 0)
+		return -1;
+
+	if (rtlsdr_i2c_read_fn(dev, FC0013_I2C_ADDR, &data, 1) < 0)
+		return -1;
+
+	*val = data;
+
+	return 0;
+}
+
+int fc0013_init(void *dev)
+{
+	int ret = 0;
+	unsigned int i;
+	uint8_t reg[] = {
+		0x00,	/* reg. 0x00: dummy */
+		0x09,	/* reg. 0x01 */
+		0x16,	/* reg. 0x02 */
+		0x00,	/* reg. 0x03 */
+		0x00,	/* reg. 0x04 */
+		0x17,	/* reg. 0x05 */
+		0x02,	/* reg. 0x06: LPF bandwidth */
+		0x0a,	/* reg. 0x07: CHECK */
+		0xff,	/* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
+			   Loop Bw 1/8 */
+		0x6e,	/* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
+		0xb8,	/* reg. 0x0a: Disable LO Test Buffer */
+		0x82,	/* reg. 0x0b: CHECK */
+		0xfc,	/* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
+		0x01,	/* reg. 0x0d: AGC Not Forcing & LNA Forcing, may need 0x02 */
+		0x00,	/* reg. 0x0e */
+		0x00,	/* reg. 0x0f */
+		0x00,	/* reg. 0x10 */
+		0x00,	/* reg. 0x11 */
+		0x00,	/* reg. 0x12 */
+		0x00,	/* reg. 0x13 */
+		0x50,	/* reg. 0x14: DVB-t High Gain, UHF.
+			   Middle Gain: 0x48, Low Gain: 0x40 */
+		0x01,	/* reg. 0x15 */
+	};
+#if 0
+	switch (rtlsdr_get_tuner_clock(dev)) {
+	case FC_XTAL_27_MHZ:
+	case FC_XTAL_28_8_MHZ:
+		reg[0x07] |= 0x20;
+		break;
+	case FC_XTAL_36_MHZ:
+	default:
+		break;
+	}
+#endif
+	reg[0x07] |= 0x20;
+
+//	if (dev->dual_master)
+	reg[0x0c] |= 0x02;
+
+	for (i = 1; i < sizeof(reg); i++) {
+		ret = fc0013_writereg(dev, i, reg[i]);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+int fc0013_rc_cal_add(void *dev, int rc_val)
+{
+	int ret;
+	uint8_t rc_cal;
+	int val;
+
+	/* push rc_cal value, get rc_cal value */
+	ret = fc0013_writereg(dev, 0x10, 0x00);
+	if (ret)
+		goto error_out;
+
+	/* get rc_cal value */
+	ret = fc0013_readreg(dev, 0x10, &rc_cal);
+	if (ret)
+		goto error_out;
+
+	rc_cal &= 0x0f;
+
+	val = (int)rc_cal + rc_val;
+
+	/* forcing rc_cal */
+	ret = fc0013_writereg(dev, 0x0d, 0x11);
+	if (ret)
+		goto error_out;
+
+	/* modify rc_cal value */
+	if (val > 15)
+		ret = fc0013_writereg(dev, 0x10, 0x0f);
+	else if (val < 0)
+		ret = fc0013_writereg(dev, 0x10, 0x00);
+	else
+		ret = fc0013_writereg(dev, 0x10, (uint8_t)val);
+
+error_out:
+	return ret;
+}
+
+int fc0013_rc_cal_reset(void *dev)
+{
+	int ret;
+
+	ret = fc0013_writereg(dev, 0x0d, 0x01);
+	if (!ret)
+		ret = fc0013_writereg(dev, 0x10, 0x00);
+
+	return ret;
+}
+
+static int fc0013_set_vhf_track(void *dev, uint32_t freq)
+{
+	int ret;
+	uint8_t tmp;
+
+	ret = fc0013_readreg(dev, 0x1d, &tmp);
+	if (ret)
+		goto error_out;
+	tmp &= 0xe3;
+	if (freq <= 177500000) {		/* VHF Track: 7 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x1c);
+	} else if (freq <= 184500000) {	/* VHF Track: 6 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x18);
+	} else if (freq <= 191500000) {	/* VHF Track: 5 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x14);
+	} else if (freq <= 198500000) {	/* VHF Track: 4 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x10);
+	} else if (freq <= 205500000) {	/* VHF Track: 3 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x0c);
+	} else if (freq <= 219500000) {	/* VHF Track: 2 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x08);
+	} else if (freq < 300000000) {		/* VHF Track: 1 */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x04);
+	} else {				/* UHF and GPS */
+		ret = fc0013_writereg(dev, 0x1d, tmp | 0x1c);
+	}
+
+error_out:
+	return ret;
+}
+
+int fc0013_set_params(void *dev, uint32_t freq, uint32_t bandwidth)
+{
+	int i, ret = 0;
+	uint8_t reg[7], am, pm, multi, tmp;
+	uint64_t f_vco;
+	uint32_t xtal_freq_div_2;
+	uint16_t xin, xdiv;
+	int vco_select = 0;
+
+	xtal_freq_div_2 = rtlsdr_get_tuner_clock(dev) / 2;
+
+	/* set VHF track */
+	ret = fc0013_set_vhf_track(dev, freq);
+	if (ret)
+		goto exit;
+
+	if (freq < 300000000) {
+		/* enable VHF filter */
+		ret = fc0013_readreg(dev, 0x07, &tmp);
+		if (ret)
+			goto exit;
+		ret = fc0013_writereg(dev, 0x07, tmp | 0x10);
+		if (ret)
+			goto exit;
+
+		/* disable UHF & disable GPS */
+		ret = fc0013_readreg(dev, 0x14, &tmp);
+		if (ret)
+			goto exit;
+		ret = fc0013_writereg(dev, 0x14, tmp & 0x1f);
+		if (ret)
+			goto exit;
+	} else if (freq <= 862000000) {
+		/* disable VHF filter */
+		ret = fc0013_readreg(dev, 0x07, &tmp);
+		if (ret)
+			goto exit;
+		ret = fc0013_writereg(dev, 0x07, tmp & 0xef);
+		if (ret)
+			goto exit;
+
+		/* enable UHF & disable GPS */
+		ret = fc0013_readreg(dev, 0x14, &tmp);
+		if (ret)
+			goto exit;
+		ret = fc0013_writereg(dev, 0x14, (tmp & 0x1f) | 0x40);
+		if (ret)
+			goto exit;
+	} else {
+		/* disable VHF filter */
+		ret = fc0013_readreg(dev, 0x07, &tmp);
+		if (ret)
+			goto exit;
+		ret = fc0013_writereg(dev, 0x07, tmp & 0xef);
+		if (ret)
+			goto exit;
+
+		/* enable UHF & disable GPS */
+		ret = fc0013_readreg(dev, 0x14, &tmp);
+		if (ret)
+			goto exit;
+		ret = fc0013_writereg(dev, 0x14, (tmp & 0x1f) | 0x40);
+		if (ret)
+			goto exit;
+	}
+
+	/* select frequency divider and the frequency of VCO */
+	if (freq < 37084000) {		/* freq * 96 < 3560000000 */
+		multi = 96;
+		reg[5] = 0x82;
+		reg[6] = 0x00;
+	} else if (freq < 55625000) {	/* freq * 64 < 3560000000 */
+		multi = 64;
+		reg[5] = 0x02;
+		reg[6] = 0x02;
+	} else if (freq < 74167000) {	/* freq * 48 < 3560000000 */
+		multi = 48;
+		reg[5] = 0x42;
+		reg[6] = 0x00;
+	} else if (freq < 111250000) {	/* freq * 32 < 3560000000 */
+		multi = 32;
+		reg[5] = 0x82;
+		reg[6] = 0x02;
+	} else if (freq < 148334000) {	/* freq * 24 < 3560000000 */
+		multi = 24;
+		reg[5] = 0x22;
+		reg[6] = 0x00;
+	} else if (freq < 222500000) {	/* freq * 16 < 3560000000 */
+		multi = 16;
+		reg[5] = 0x42;
+		reg[6] = 0x02;
+	} else if (freq < 296667000) {	/* freq * 12 < 3560000000 */
+		multi = 12;
+		reg[5] = 0x12;
+		reg[6] = 0x00;
+	} else if (freq < 445000000) {	/* freq * 8 < 3560000000 */
+		multi = 8;
+		reg[5] = 0x22;
+		reg[6] = 0x02;
+	} else if (freq < 593334000) {	/* freq * 6 < 3560000000 */
+		multi = 6;
+		reg[5] = 0x0a;
+		reg[6] = 0x00;
+	} else if (freq < 950000000) {	/* freq * 4 < 3800000000 */
+		multi = 4;
+		reg[5] = 0x12;
+		reg[6] = 0x02;
+	} else {
+		multi = 2;
+		reg[5] = 0x0a;
+		reg[6] = 0x02;
+	}
+
+	f_vco = freq * multi;
+
+	if (f_vco >= 3060000000U) {
+		reg[6] |= 0x08;
+		vco_select = 1;
+	}
+
+	/* From divided value (XDIV) determined the FA and FP value */
+	xdiv = (uint16_t)(f_vco / xtal_freq_div_2);
+	if ((f_vco - xdiv * xtal_freq_div_2) >= (xtal_freq_div_2 / 2))
+		xdiv++;
+
+	pm = (uint8_t)(xdiv / 8);
+	am = (uint8_t)(xdiv - (8 * pm));
+
+	if (am < 2) {
+		am += 8;
+		pm--;
+	}
+
+	if (pm > 31) {
+		reg[1] = am + (8 * (pm - 31));
+		reg[2] = 31;
+	} else {
+		reg[1] = am;
+		reg[2] = pm;
+	}
+
+	if ((reg[1] > 15) || (reg[2] < 0x0b)) {
+		fprintf(stderr, "[FC0013] no valid PLL combination "
+				"found for %u Hz!\n", freq);
+		return -1;
+	}
+
+	/* fix clock out */
+	reg[6] |= 0x20;
+
+	/* From VCO frequency determines the XIN ( fractional part of Delta
+	   Sigma PLL) and divided value (XDIV) */
+	xin = (uint16_t)((f_vco - (f_vco / xtal_freq_div_2) * xtal_freq_div_2) / 1000);
+	xin = (xin << 15) / (xtal_freq_div_2 / 1000);
+	if (xin >= 16384)
+		xin += 32768;
+
+	reg[3] = xin >> 8;
+	reg[4] = xin & 0xff;
+
+	reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
+	switch (bandwidth) {
+	case 6000000:
+		reg[6] |= 0x80;
+		break;
+	case 7000000:
+		reg[6] |= 0x40;
+		break;
+	case 8000000:
+	default:
+		break;
+	}
+
+	/* modified for Realtek demod */
+	reg[5] |= 0x07;
+
+	for (i = 1; i <= 6; i++) {
+		ret = fc0013_writereg(dev, i, reg[i]);
+		if (ret)
+			goto exit;
+	}
+
+	ret = fc0013_readreg(dev, 0x11, &tmp);
+	if (ret)
+		goto exit;
+	if (multi == 64)
+		ret = fc0013_writereg(dev, 0x11, tmp | 0x04);
+	else
+		ret = fc0013_writereg(dev, 0x11, tmp & 0xfb);
+	if (ret)
+		goto exit;
+
+	/* VCO Calibration */
+	ret = fc0013_writereg(dev, 0x0e, 0x80);
+	if (!ret)
+		ret = fc0013_writereg(dev, 0x0e, 0x00);
+
+	/* VCO Re-Calibration if needed */
+	if (!ret)
+		ret = fc0013_writereg(dev, 0x0e, 0x00);
+
+	if (!ret) {
+//		msleep(10);
+		ret = fc0013_readreg(dev, 0x0e, &tmp);
+	}
+	if (ret)
+		goto exit;
+
+	/* vco selection */
+	tmp &= 0x3f;
+
+	if (vco_select) {
+		if (tmp > 0x3c) {
+			reg[6] &= ~0x08;
+			ret = fc0013_writereg(dev, 0x06, reg[6]);
+			if (!ret)
+				ret = fc0013_writereg(dev, 0x0e, 0x80);
+			if (!ret)
+				ret = fc0013_writereg(dev, 0x0e, 0x00);
+		}
+	} else {
+		if (tmp < 0x02) {
+			reg[6] |= 0x08;
+			ret = fc0013_writereg(dev, 0x06, reg[6]);
+			if (!ret)
+				ret = fc0013_writereg(dev, 0x0e, 0x80);
+			if (!ret)
+				ret = fc0013_writereg(dev, 0x0e, 0x00);
+		}
+	}
+
+exit:
+	return ret;
+}
+
+int fc0013_set_gain_mode(void *dev, int manual)
+{
+	int ret = 0;
+	uint8_t tmp = 0;
+
+	ret |= fc0013_readreg(dev, 0x0d, &tmp);
+
+	if (manual)
+		tmp |= (1 << 3);
+	else
+		tmp &= ~(1 << 3);
+
+	ret |= fc0013_writereg(dev, 0x0d, tmp);
+
+	/* set a fixed IF-gain for now */
+	ret |= fc0013_writereg(dev, 0x13, 0x0a);
+
+	return ret;
+}
+
+int fc0013_lna_gains[] ={
+	-99,	0x02,
+	-73,	0x03,
+	-65,	0x05,
+	-63,	0x04,
+	-63,	0x00,
+	-60,	0x07,
+	-58,	0x01,
+	-54,	0x06,
+	58,	0x0f,
+	61,	0x0e,
+	63,	0x0d,
+	65,	0x0c,
+	67,	0x0b,
+	68,	0x0a,
+	70,	0x09,
+	71,	0x08,
+	179,	0x17,
+	181,	0x16,
+	182,	0x15,
+	184,	0x14,
+	186,	0x13,
+	188,	0x12,
+	191,	0x11,
+	197,	0x10
+};
+
+#define GAIN_CNT	(sizeof(fc0013_lna_gains) / sizeof(int) / 2)
+
+int fc0013_set_lna_gain(void *dev, int gain)
+{
+	int ret = 0;
+	unsigned int i;
+	uint8_t tmp = 0;
+
+	ret |= fc0013_readreg(dev, 0x14, &tmp);
+
+	/* mask bits off */
+	tmp &= 0xe0;
+
+	for (i = 0; i < GAIN_CNT; i++) {
+		if ((fc0013_lna_gains[i*2] >= gain) || (i+1 == GAIN_CNT)) {
+			tmp |= fc0013_lna_gains[i*2 + 1];
+			break;
+		}
+	}
+
+	/* set gain */
+	ret |= fc0013_writereg(dev, 0x14, tmp);
+
+	return ret;
+}
diff --git a/Radio/HW/RtlSdr/r820/src/tuner_fc2580.c b/Radio/HW/RtlSdr/r820/src/tuner_fc2580.c
new file mode 100644
index 0000000..d2eeba5
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/tuner_fc2580.c
@@ -0,0 +1,494 @@
+/*
+ * FCI FC2580 tuner driver, taken from the kernel driver that can be found
+ * on http://linux.terratec.de/tv_en.html
+ *
+ * This driver is a mess, and should be cleaned up/rewritten.
+ *
+ */
+
+#include <stdint.h>
+
+#include "rtlsdr_i2c.h"
+#include "tuner_fc2580.h"
+
+/* 16.384 MHz (at least on the Logilink VG0002A) */
+#define CRYSTAL_FREQ		16384000
+
+/* glue functions to rtl-sdr code */
+
+fc2580_fci_result_type fc2580_i2c_write(void *pTuner, unsigned char reg, unsigned char val)
+{
+	uint8_t data[2];
+
+	data[0] = reg;
+	data[1] = val;
+
+	if (rtlsdr_i2c_write_fn(pTuner, FC2580_I2C_ADDR, data, 2) < 0)
+		return FC2580_FCI_FAIL;
+
+	return FC2580_FCI_SUCCESS;
+}
+
+fc2580_fci_result_type fc2580_i2c_read(void *pTuner, unsigned char reg, unsigned char *read_data)
+{
+	uint8_t data = reg;
+
+	if (rtlsdr_i2c_write_fn(pTuner, FC2580_I2C_ADDR, &data, 1) < 0)
+		return FC2580_FCI_FAIL;
+
+	if (rtlsdr_i2c_read_fn(pTuner, FC2580_I2C_ADDR, &data, 1) < 0)
+		return FC2580_FCI_FAIL;
+
+	*read_data = data;
+
+	return FC2580_FCI_SUCCESS;
+}
+
+int
+fc2580_Initialize(
+	void *pTuner
+	)
+{
+	int AgcMode;
+	unsigned int CrystalFreqKhz;
+
+	//TODO set AGC mode
+	AgcMode = FC2580_AGC_EXTERNAL;
+
+	// Initialize tuner with AGC mode.
+	// Note: CrystalFreqKhz = round(CrystalFreqHz / 1000)
+	CrystalFreqKhz = (unsigned int)((CRYSTAL_FREQ + 500) / 1000);
+
+	if(fc2580_set_init(pTuner, AgcMode, CrystalFreqKhz) != FC2580_FCI_SUCCESS)
+		goto error_status_initialize_tuner;
+
+
+	return FUNCTION_SUCCESS;
+
+
+error_status_initialize_tuner:
+	return FUNCTION_ERROR;
+}
+
+int
+fc2580_SetRfFreqHz(
+	void *pTuner,
+	unsigned long RfFreqHz
+	)
+{
+	unsigned int RfFreqKhz;
+	unsigned int CrystalFreqKhz;
+
+	// Set tuner RF frequency in KHz.
+	// Note: RfFreqKhz = round(RfFreqHz / 1000)
+	//       CrystalFreqKhz = round(CrystalFreqHz / 1000)
+	RfFreqKhz = (unsigned int)((RfFreqHz + 500) / 1000);
+	CrystalFreqKhz = (unsigned int)((CRYSTAL_FREQ + 500) / 1000);
+
+	if(fc2580_set_freq(pTuner, RfFreqKhz, CrystalFreqKhz) != FC2580_FCI_SUCCESS)
+		goto error_status_set_tuner_rf_frequency;
+
+	return FUNCTION_SUCCESS;
+
+error_status_set_tuner_rf_frequency:
+	return FUNCTION_ERROR;
+}
+
+/**
+
+@brief   Set FC2580 tuner bandwidth mode.
+
+*/
+int
+fc2580_SetBandwidthMode(
+	void *pTuner,
+	int BandwidthMode
+	)
+{
+	unsigned int CrystalFreqKhz;
+
+	// Set tuner bandwidth mode.
+	// Note: CrystalFreqKhz = round(CrystalFreqHz / 1000)
+	CrystalFreqKhz = (unsigned int)((CRYSTAL_FREQ + 500) / 1000);
+
+	if(fc2580_set_filter(pTuner, (unsigned char)BandwidthMode, CrystalFreqKhz) != FC2580_FCI_SUCCESS)
+		goto error_status_set_tuner_bandwidth_mode;
+
+	return FUNCTION_SUCCESS;
+
+
+error_status_set_tuner_bandwidth_mode:
+	return FUNCTION_ERROR;
+}
+
+void fc2580_wait_msec(void *pTuner, int a)
+{
+	/* USB latency is enough for now ;) */
+//	usleep(a * 1000);
+	return;
+}
+
+/*==============================================================================
+       fc2580 initial setting
+
+  This function is a generic function which gets called to initialize
+
+  fc2580 in DVB-H mode or L-Band TDMB mode
+
+  <input parameter>
+
+  ifagc_mode
+    type : integer
+	1 : Internal AGC
+	2 : Voltage Control Mode
+
+==============================================================================*/
+fc2580_fci_result_type fc2580_set_init( void *pTuner, int ifagc_mode, unsigned int freq_xtal )
+{
+	fc2580_fci_result_type result = FC2580_FCI_SUCCESS;
+
+	result &= fc2580_i2c_write(pTuner, 0x00, 0x00);	/*** Confidential ***/
+	result &= fc2580_i2c_write(pTuner, 0x12, 0x86);
+	result &= fc2580_i2c_write(pTuner, 0x14, 0x5C);
+	result &= fc2580_i2c_write(pTuner, 0x16, 0x3C);
+	result &= fc2580_i2c_write(pTuner, 0x1F, 0xD2);
+	result &= fc2580_i2c_write(pTuner, 0x09, 0xD7);
+	result &= fc2580_i2c_write(pTuner, 0x0B, 0xD5);
+	result &= fc2580_i2c_write(pTuner, 0x0C, 0x32);
+	result &= fc2580_i2c_write(pTuner, 0x0E, 0x43);
+	result &= fc2580_i2c_write(pTuner, 0x21, 0x0A);
+	result &= fc2580_i2c_write(pTuner, 0x22, 0x82);
+	if( ifagc_mode == 1 )
+	{
+		result &= fc2580_i2c_write(pTuner, 0x45, 0x10);	//internal AGC
+		result &= fc2580_i2c_write(pTuner, 0x4C, 0x00);	//HOLD_AGC polarity
+	}
+	else if( ifagc_mode == 2 )
+	{
+		result &= fc2580_i2c_write(pTuner, 0x45, 0x20);	//Voltage Control Mode
+		result &= fc2580_i2c_write(pTuner, 0x4C, 0x02);	//HOLD_AGC polarity
+	}
+	result &= fc2580_i2c_write(pTuner, 0x3F, 0x88);
+	result &= fc2580_i2c_write(pTuner, 0x02, 0x0E);
+	result &= fc2580_i2c_write(pTuner, 0x58, 0x14);
+	result &= fc2580_set_filter(pTuner, 8, freq_xtal);	//BW = 7.8MHz
+
+	return result;
+}
+
+
+/*==============================================================================
+       fc2580 frequency setting
+
+  This function is a generic function which gets called to change LO Frequency
+
+  of fc2580 in DVB-H mode or L-Band TDMB mode
+
+  <input parameter>
+  freq_xtal: kHz
+
+  f_lo
+	Value of target LO Frequency in 'kHz' unit
+	ex) 2.6GHz = 2600000
+
+==============================================================================*/
+fc2580_fci_result_type fc2580_set_freq( void *pTuner, unsigned int f_lo, unsigned int freq_xtal )
+{
+	unsigned int f_diff, f_diff_shifted, n_val, k_val;
+	unsigned int f_vco, r_val, f_comp;
+	unsigned char pre_shift_bits = 4;// number of preshift to prevent overflow in shifting f_diff to f_diff_shifted
+	unsigned char data_0x18;
+	unsigned char data_0x02 = (USE_EXT_CLK<<5)|0x0E;
+	
+	fc2580_band_type band = ( f_lo > 1000000 )? FC2580_L_BAND : ( f_lo > 400000 )? FC2580_UHF_BAND : FC2580_VHF_BAND;
+
+	fc2580_fci_result_type result = FC2580_FCI_SUCCESS;
+
+	f_vco = ( band == FC2580_UHF_BAND )? f_lo * 4 : (( band == FC2580_L_BAND )? f_lo * 2 : f_lo * 12);
+	r_val = ( f_vco >= 2*76*freq_xtal )? 1 : ( f_vco >= 76*freq_xtal )? 2 : 4;
+	f_comp = freq_xtal/r_val;
+	n_val =	( f_vco / 2 ) / f_comp;
+	
+	f_diff = f_vco - 2* f_comp * n_val;
+	f_diff_shifted = f_diff << ( 20 - pre_shift_bits );
+	k_val = f_diff_shifted / ( ( 2* f_comp ) >> pre_shift_bits );
+	
+	if( f_diff_shifted - k_val * ( ( 2* f_comp ) >> pre_shift_bits ) >= ( f_comp >> pre_shift_bits ) )
+	k_val = k_val + 1;
+	
+	if( f_vco >= BORDER_FREQ )	//Select VCO Band
+		data_0x02 = data_0x02 | 0x08;	//0x02[3] = 1;
+	else
+		data_0x02 = data_0x02 & 0xF7;	//0x02[3] = 0;
+	
+//	if( band != curr_band ) {
+		switch(band)
+		{
+			case FC2580_UHF_BAND:
+				data_0x02 = (data_0x02 & 0x3F);
+
+				result &= fc2580_i2c_write(pTuner, 0x25, 0xF0);
+				result &= fc2580_i2c_write(pTuner, 0x27, 0x77);
+				result &= fc2580_i2c_write(pTuner, 0x28, 0x53);
+				result &= fc2580_i2c_write(pTuner, 0x29, 0x60);
+				result &= fc2580_i2c_write(pTuner, 0x30, 0x09);
+				result &= fc2580_i2c_write(pTuner, 0x50, 0x8C);
+				result &= fc2580_i2c_write(pTuner, 0x53, 0x50);
+
+				if( f_lo < 538000 )
+					result &= fc2580_i2c_write(pTuner, 0x5F, 0x13);
+				else					
+					result &= fc2580_i2c_write(pTuner, 0x5F, 0x15);
+
+				if( f_lo < 538000 )
+				{
+					result &= fc2580_i2c_write(pTuner, 0x61, 0x07);
+					result &= fc2580_i2c_write(pTuner, 0x62, 0x06);
+					result &= fc2580_i2c_write(pTuner, 0x67, 0x06);
+					result &= fc2580_i2c_write(pTuner, 0x68, 0x08);
+					result &= fc2580_i2c_write(pTuner, 0x69, 0x10);
+					result &= fc2580_i2c_write(pTuner, 0x6A, 0x12);
+				}
+				else if( f_lo < 794000 )
+				{
+					result &= fc2580_i2c_write(pTuner, 0x61, 0x03);
+					result &= fc2580_i2c_write(pTuner, 0x62, 0x03);
+					result &= fc2580_i2c_write(pTuner, 0x67, 0x03);  //ACI improve
+					result &= fc2580_i2c_write(pTuner, 0x68, 0x05);  //ACI improve
+					result &= fc2580_i2c_write(pTuner, 0x69, 0x0C);
+					result &= fc2580_i2c_write(pTuner, 0x6A, 0x0E);
+				}
+				else
+				{
+					result &= fc2580_i2c_write(pTuner, 0x61, 0x07);
+					result &= fc2580_i2c_write(pTuner, 0x62, 0x06);
+					result &= fc2580_i2c_write(pTuner, 0x67, 0x07);
+					result &= fc2580_i2c_write(pTuner, 0x68, 0x09);
+					result &= fc2580_i2c_write(pTuner, 0x69, 0x10);
+					result &= fc2580_i2c_write(pTuner, 0x6A, 0x12);
+				}
+
+				result &= fc2580_i2c_write(pTuner, 0x63, 0x15);
+
+				result &= fc2580_i2c_write(pTuner, 0x6B, 0x0B);
+				result &= fc2580_i2c_write(pTuner, 0x6C, 0x0C);
+				result &= fc2580_i2c_write(pTuner, 0x6D, 0x78);
+				result &= fc2580_i2c_write(pTuner, 0x6E, 0x32);
+				result &= fc2580_i2c_write(pTuner, 0x6F, 0x14);
+				result &= fc2580_set_filter(pTuner, 8, freq_xtal);	//BW = 7.8MHz
+				break;
+			case FC2580_VHF_BAND:
+				data_0x02 = (data_0x02 & 0x3F) | 0x80;
+				result &= fc2580_i2c_write(pTuner, 0x27, 0x77);
+				result &= fc2580_i2c_write(pTuner, 0x28, 0x33);
+				result &= fc2580_i2c_write(pTuner, 0x29, 0x40);
+				result &= fc2580_i2c_write(pTuner, 0x30, 0x09);
+				result &= fc2580_i2c_write(pTuner, 0x50, 0x8C);
+				result &= fc2580_i2c_write(pTuner, 0x53, 0x50);
+				result &= fc2580_i2c_write(pTuner, 0x5F, 0x0F);
+				result &= fc2580_i2c_write(pTuner, 0x61, 0x07);
+				result &= fc2580_i2c_write(pTuner, 0x62, 0x00);
+				result &= fc2580_i2c_write(pTuner, 0x63, 0x15);
+				result &= fc2580_i2c_write(pTuner, 0x67, 0x03);
+				result &= fc2580_i2c_write(pTuner, 0x68, 0x05);
+				result &= fc2580_i2c_write(pTuner, 0x69, 0x10);
+				result &= fc2580_i2c_write(pTuner, 0x6A, 0x12);
+				result &= fc2580_i2c_write(pTuner, 0x6B, 0x08);
+				result &= fc2580_i2c_write(pTuner, 0x6C, 0x0A);
+				result &= fc2580_i2c_write(pTuner, 0x6D, 0x78);
+				result &= fc2580_i2c_write(pTuner, 0x6E, 0x32);
+				result &= fc2580_i2c_write(pTuner, 0x6F, 0x54);
+				result &= fc2580_set_filter(pTuner, 7, freq_xtal);	//BW = 6.8MHz
+				break;
+			case FC2580_L_BAND:
+				data_0x02 = (data_0x02 & 0x3F) | 0x40;
+				result &= fc2580_i2c_write(pTuner, 0x2B, 0x70);
+				result &= fc2580_i2c_write(pTuner, 0x2C, 0x37);
+				result &= fc2580_i2c_write(pTuner, 0x2D, 0xE7);
+				result &= fc2580_i2c_write(pTuner, 0x30, 0x09);
+				result &= fc2580_i2c_write(pTuner, 0x44, 0x20);
+				result &= fc2580_i2c_write(pTuner, 0x50, 0x8C);
+				result &= fc2580_i2c_write(pTuner, 0x53, 0x50);
+				result &= fc2580_i2c_write(pTuner, 0x5F, 0x0F);
+				result &= fc2580_i2c_write(pTuner, 0x61, 0x0F);
+				result &= fc2580_i2c_write(pTuner, 0x62, 0x00);
+				result &= fc2580_i2c_write(pTuner, 0x63, 0x13);
+				result &= fc2580_i2c_write(pTuner, 0x67, 0x00);
+				result &= fc2580_i2c_write(pTuner, 0x68, 0x02);
+				result &= fc2580_i2c_write(pTuner, 0x69, 0x0C);
+				result &= fc2580_i2c_write(pTuner, 0x6A, 0x0E);
+				result &= fc2580_i2c_write(pTuner, 0x6B, 0x08);
+				result &= fc2580_i2c_write(pTuner, 0x6C, 0x0A);
+				result &= fc2580_i2c_write(pTuner, 0x6D, 0xA0);
+				result &= fc2580_i2c_write(pTuner, 0x6E, 0x50);
+				result &= fc2580_i2c_write(pTuner, 0x6F, 0x14);
+				result &= fc2580_set_filter(pTuner, 1, freq_xtal);	//BW = 1.53MHz
+				break;
+			default:
+				break;
+		}
+//		curr_band = band;
+//	}
+
+	//A command about AGC clock's pre-divide ratio
+	if( freq_xtal >= 28000 )
+		result &= fc2580_i2c_write(pTuner, 0x4B, 0x22 );
+
+	//Commands about VCO Band and PLL setting.
+	result &= fc2580_i2c_write(pTuner, 0x02, data_0x02);
+	data_0x18 = ( ( r_val == 1 )? 0x00 : ( ( r_val == 2 )? 0x10 : 0x20 ) ) + (unsigned char)(k_val >> 16);
+	result &= fc2580_i2c_write(pTuner, 0x18, data_0x18);						//Load 'R' value and high part of 'K' values
+	result &= fc2580_i2c_write(pTuner, 0x1A, (unsigned char)( k_val >> 8 ) );	//Load middle part of 'K' value
+	result &= fc2580_i2c_write(pTuner, 0x1B, (unsigned char)( k_val ) );		//Load lower part of 'K' value
+	result &= fc2580_i2c_write(pTuner, 0x1C, (unsigned char)( n_val ) );		//Load 'N' value
+
+	//A command about UHF LNA Load Cap
+	if( band == FC2580_UHF_BAND )
+		result &= fc2580_i2c_write(pTuner, 0x2D, ( f_lo <= (unsigned int)794000 )? 0x9F : 0x8F );	//LNA_OUT_CAP
+	
+
+	return result;
+}
+
+
+/*==============================================================================
+       fc2580 filter BW setting
+
+  This function is a generic function which gets called to change Bandwidth
+
+  frequency of fc2580's channel selection filter
+
+  <input parameter>
+  freq_xtal: kHz
+
+  filter_bw
+    1 : 1.53MHz(TDMB)
+	6 : 6MHz   (Bandwidth 6MHz)
+	7 : 6.8MHz (Bandwidth 7MHz)
+	8 : 7.8MHz (Bandwidth 8MHz)
+	
+
+==============================================================================*/
+fc2580_fci_result_type fc2580_set_filter( void *pTuner, unsigned char filter_bw, unsigned int freq_xtal )
+{
+	unsigned char	cal_mon = 0, i;
+	fc2580_fci_result_type result = FC2580_FCI_SUCCESS;
+
+	if(filter_bw == 1)
+	{
+		result &= fc2580_i2c_write(pTuner, 0x36, 0x1C);
+		result &= fc2580_i2c_write(pTuner, 0x37, (unsigned char)(4151*freq_xtal/1000000) );
+		result &= fc2580_i2c_write(pTuner, 0x39, 0x00);
+		result &= fc2580_i2c_write(pTuner, 0x2E, 0x09);
+	}
+	if(filter_bw == 6)
+	{
+		result &= fc2580_i2c_write(pTuner, 0x36, 0x18);
+		result &= fc2580_i2c_write(pTuner, 0x37, (unsigned char)(4400*freq_xtal/1000000) );
+		result &= fc2580_i2c_write(pTuner, 0x39, 0x00);
+		result &= fc2580_i2c_write(pTuner, 0x2E, 0x09);
+	}
+	else if(filter_bw == 7)
+	{
+		result &= fc2580_i2c_write(pTuner, 0x36, 0x18);
+		result &= fc2580_i2c_write(pTuner, 0x37, (unsigned char)(3910*freq_xtal/1000000) );
+		result &= fc2580_i2c_write(pTuner, 0x39, 0x80);
+		result &= fc2580_i2c_write(pTuner, 0x2E, 0x09);
+	}
+	else if(filter_bw == 8)
+	{
+		result &= fc2580_i2c_write(pTuner, 0x36, 0x18);
+		result &= fc2580_i2c_write(pTuner, 0x37, (unsigned char)(3300*freq_xtal/1000000) );
+		result &= fc2580_i2c_write(pTuner, 0x39, 0x80);
+		result &= fc2580_i2c_write(pTuner, 0x2E, 0x09);
+	}
+
+	
+	for(i=0; i<5; i++)
+	{
+		fc2580_wait_msec(pTuner, 5);//wait 5ms
+		result &= fc2580_i2c_read(pTuner, 0x2F, &cal_mon);
+		if( (cal_mon & 0xC0) != 0xC0)
+		{
+			result &= fc2580_i2c_write(pTuner, 0x2E, 0x01);
+			result &= fc2580_i2c_write(pTuner, 0x2E, 0x09);
+		}
+		else
+			break;
+	}
+
+	result &= fc2580_i2c_write(pTuner, 0x2E, 0x01);
+
+	return result;
+}
+
+/*==============================================================================
+       fc2580 RSSI function
+
+  This function is a generic function which returns fc2580's
+  
+  current RSSI value.
+
+  <input parameter>
+	none
+
+  <return value>
+  int
+  	rssi : estimated input power.
+
+==============================================================================*/
+//int fc2580_get_rssi(void) {
+//	
+//	unsigned char s_lna, s_rfvga, s_cfs, s_ifvga;
+//	int ofs_lna, ofs_rfvga, ofs_csf, ofs_ifvga, rssi;
+//
+//	fc2580_i2c_read(0x71, &s_lna );
+//	fc2580_i2c_read(0x72, &s_rfvga );
+//	fc2580_i2c_read(0x73, &s_cfs );
+//	fc2580_i2c_read(0x74, &s_ifvga );
+//	
+//
+//	ofs_lna = 
+//			(curr_band==FC2580_UHF_BAND)?
+//				(s_lna==0)? 0 :
+//				(s_lna==1)? -6 :
+//				(s_lna==2)? -17 :
+//				(s_lna==3)? -22 : -30 :
+//			(curr_band==FC2580_VHF_BAND)?
+//				(s_lna==0)? 0 :
+//				(s_lna==1)? -6 :
+//				(s_lna==2)? -19 :
+//				(s_lna==3)? -24 : -32 :
+//			(curr_band==FC2580_L_BAND)?
+//				(s_lna==0)? 0 :
+//				(s_lna==1)? -6 :
+//				(s_lna==2)? -11 :
+//				(s_lna==3)? -16 : -34 :
+//			0;//FC2580_NO_BAND
+//	ofs_rfvga = -s_rfvga+((s_rfvga>=11)? 1 : 0) + ((s_rfvga>=18)? 1 : 0);
+//	ofs_csf = -6*s_cfs;
+//	ofs_ifvga = s_ifvga/4;
+//
+//	return rssi = ofs_lna+ofs_rfvga+ofs_csf+ofs_ifvga+OFS_RSSI;
+//				
+//}
+
+/*==============================================================================
+       fc2580 Xtal frequency Setting
+
+  This function is a generic function which sets 
+  
+  the frequency of xtal.
+  
+  <input parameter>
+  
+  frequency
+  	frequency value of internal(external) Xtal(clock) in kHz unit.
+
+==============================================================================*/
+//void fc2580_set_freq_xtal(unsigned int frequency) {
+//
+//	freq_xtal = frequency;
+//
+//}
+
diff --git a/Radio/HW/RtlSdr/r820/src/tuner_r82xx.c b/Radio/HW/RtlSdr/r820/src/tuner_r82xx.c
new file mode 100644
index 0000000..997abd7
--- /dev/null
+++ b/Radio/HW/RtlSdr/r820/src/tuner_r82xx.c
@@ -0,0 +1,1274 @@
+/*
+ * Rafael Micro R820T/R828D driver
+ *
+ * Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (C) 2013 Steve Markgraf <steve@steve-m.de>
+ *
+ * This driver is a heavily modified version of the driver found in the
+ * Linux kernel:
+ * http://git.linuxtv.org/linux-2.6.git/history/HEAD:/drivers/media/tuners/r820t.c
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+
+#include "rtlsdr_i2c.h"
+#include "tuner_r82xx.h"
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#define MHZ(x)		((x)*1000*1000)
+#define KHZ(x)		((x)*1000)
+
+/*
+ * Static constants
+ */
+
+/* Those initial values start from REG_SHADOW_START */
+static const uint8_t r82xx_init_array[NUM_REGS] = {
+	0x83, 0x32, 0x75,			/* 05 to 07 */
+	0xc0, 0x40, 0xd6, 0x6c,			/* 08 to 0b */
+	0xf5, 0x63, 0x75, 0x68,			/* 0c to 0f */
+	0x6c, 0x83, 0x80, 0x00,			/* 10 to 13 */
+	0x0f, 0x00, 0xc0, 0x30,			/* 14 to 17 */
+	0x48, 0xcc, 0x60, 0x00,			/* 18 to 1b */
+	0x54, 0xae, 0x4a, 0xc0			/* 1c to 1f */
+};
+
+/* Tuner frequency ranges */
+static const struct r82xx_freq_range freq_ranges[] = {
+	{
+	/* .freq = */		0,	/* Start freq, in MHz */
+	/* .open_d = */		0x08,	/* low */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0xdf,	/* R27[7:0]  band2,band0 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		50,	/* Start freq, in MHz */
+	/* .open_d = */		0x08,	/* low */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0xbe,	/* R27[7:0]  band4,band1  */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		55,	/* Start freq, in MHz */
+	/* .open_d = */		0x08,	/* low */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x8b,	/* R27[7:0]  band7,band4 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		60,	/* Start freq, in MHz */
+	/* .open_d = */		0x08,	/* low */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x7b,	/* R27[7:0]  band8,band4 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		65,	/* Start freq, in MHz */
+	/* .open_d = */		0x08,	/* low */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x69,	/* R27[7:0]  band9,band6 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		70,	/* Start freq, in MHz */
+	/* .open_d = */		0x08,	/* low */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x58,	/* R27[7:0]  band10,band7 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		75,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x44,	/* R27[7:0]  band11,band11 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		80,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x44,	/* R27[7:0]  band11,band11 */
+	/* .xtal_cap20p = */	0x02,	/* R16[1:0]  20pF (10)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		90,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x34,	/* R27[7:0]  band12,band11 */
+	/* .xtal_cap20p = */	0x01,	/* R16[1:0]  10pF (01)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		100,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x34,	/* R27[7:0]  band12,band11 */
+	/* .xtal_cap20p = */	0x01,	/* R16[1:0]  10pF (01)    */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		110,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x24,	/* R27[7:0]  band13,band11 */
+	/* .xtal_cap20p = */	0x01,	/* R16[1:0]  10pF (01)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		120,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x24,	/* R27[7:0]  band13,band11 */
+	/* .xtal_cap20p = */	0x01,	/* R16[1:0]  10pF (01)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		140,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x14,	/* R27[7:0]  band14,band11 */
+	/* .xtal_cap20p = */	0x01,	/* R16[1:0]  10pF (01)   */
+	/* .xtal_cap10p = */	0x01,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		180,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x13,	/* R27[7:0]  band14,band12 */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		220,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x13,	/* R27[7:0]  band14,band12 */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		250,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x11,	/* R27[7:0]  highest,highest */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		280,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x02,	/* R26[7:6]=0 (LPF)  R26[1:0]=2 (low) */
+	/* .tf_c = */		0x00,	/* R27[7:0]  highest,highest */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		310,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x41,	/* R26[7:6]=1 (bypass)  R26[1:0]=1 (middle) */
+	/* .tf_c = */		0x00,	/* R27[7:0]  highest,highest */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		450,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x41,	/* R26[7:6]=1 (bypass)  R26[1:0]=1 (middle) */
+	/* .tf_c = */		0x00,	/* R27[7:0]  highest,highest */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		588,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x40,	/* R26[7:6]=1 (bypass)  R26[1:0]=0 (highest) */
+	/* .tf_c = */		0x00,	/* R27[7:0]  highest,highest */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}, {
+	/* .freq = */		650,	/* Start freq, in MHz */
+	/* .open_d = */		0x00,	/* high */
+	/* .rf_mux_ploy = */	0x40,	/* R26[7:6]=1 (bypass)  R26[1:0]=0 (highest) */
+	/* .tf_c = */		0x00,	/* R27[7:0]  highest,highest */
+	/* .xtal_cap20p = */	0x00,	/* R16[1:0]  0pF (00)   */
+	/* .xtal_cap10p = */	0x00,
+	/* .xtal_cap0p = */	0x00,
+	}
+};
+
+static int r82xx_xtal_capacitor[][2] = {
+	{ 0x0b, XTAL_LOW_CAP_30P },
+	{ 0x02, XTAL_LOW_CAP_20P },
+	{ 0x01, XTAL_LOW_CAP_10P },
+	{ 0x00, XTAL_LOW_CAP_0P  },
+	{ 0x10, XTAL_HIGH_CAP_0P },
+};
+
+/*
+ * I2C read/write code and shadow registers logic
+ */
+static void shadow_store(struct r82xx_priv *priv, uint8_t reg, const uint8_t *val,
+			 int len)
+{
+	int r = reg - REG_SHADOW_START;
+
+	if (r < 0) {
+		len += r;
+		r = 0;
+	}
+	if (len <= 0)
+		return;
+	if (len > NUM_REGS - r)
+		len = NUM_REGS - r;
+
+	memcpy(&priv->regs[r], val, len);
+}
+
+static int r82xx_write(struct r82xx_priv *priv, uint8_t reg, const uint8_t *val,
+		       unsigned int len)
+{
+	int rc, size, pos = 0;
+
+	/* Store the shadow registers */
+	shadow_store(priv, reg, val, len);
+
+	do {
+		if (len > priv->cfg->max_i2c_msg_len - 1)
+			size = priv->cfg->max_i2c_msg_len - 1;
+		else
+			size = len;
+
+		/* Fill I2C buffer */
+		priv->buf[0] = reg;
+		memcpy(&priv->buf[1], &val[pos], size);
+
+		rc = rtlsdr_i2c_write_fn(priv->rtl_dev, priv->cfg->i2c_addr,
+					 priv->buf, size + 1);
+
+		if (rc != size + 1) {
+			fprintf(stderr, "%s: i2c wr failed=%d reg=%02x len=%d\n",
+				   __FUNCTION__, rc, reg, size);
+			if (rc < 0)
+				return rc;
+			return -1;
+		}
+
+		reg += size;
+		len -= size;
+		pos += size;
+	} while (len > 0);
+
+	return 0;
+}
+
+static int r82xx_write_reg(struct r82xx_priv *priv, uint8_t reg, uint8_t val)
+{
+	return r82xx_write(priv, reg, &val, 1);
+}
+
+static int r82xx_read_cache_reg(struct r82xx_priv *priv, int reg)
+{
+	reg -= REG_SHADOW_START;
+
+	if (reg >= 0 && reg < NUM_REGS)
+		return priv->regs[reg];
+	else
+		return -1;
+}
+
+static int r82xx_write_reg_mask(struct r82xx_priv *priv, uint8_t reg, uint8_t val,
+				uint8_t bit_mask)
+{
+	int rc = r82xx_read_cache_reg(priv, reg);
+
+	if (rc < 0)
+		return rc;
+
+	val = (rc & ~bit_mask) | (val & bit_mask);
+
+	return r82xx_write(priv, reg, &val, 1);
+}
+
+static uint8_t r82xx_bitrev(uint8_t byte)
+{
+	const uint8_t lut[16] = { 0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
+				  0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf };
+
+	return (lut[byte & 0xf] << 4) | lut[byte >> 4];
+}
+
+static int r82xx_read(struct r82xx_priv *priv, uint8_t reg, uint8_t *val, int len)
+{
+	int rc, i;
+	uint8_t *p = &priv->buf[1];
+
+	priv->buf[0] = reg;
+
+	rc = rtlsdr_i2c_write_fn(priv->rtl_dev, priv->cfg->i2c_addr, priv->buf, 1);
+
+	if (rc != 1) {
+		fprintf(stderr, "%s: i2c wr failed=%d reg=%02x len=%d\n",
+			   __FUNCTION__, rc, reg, 1);
+		if (rc < 0)
+			return rc;
+		return -1;
+	}
+
+	rc = rtlsdr_i2c_read_fn(priv->rtl_dev, priv->cfg->i2c_addr, p, len);
+
+	if (rc != len) {
+		fprintf(stderr, "%s: i2c rd failed=%d reg=%02x len=%d\n",
+			   __FUNCTION__, rc, reg, len);
+		if (rc < 0)
+			return rc;
+		return -1;
+	}
+
+	/* Copy data to the output buffer */
+	for (i = 0; i < len; i++)
+		val[i] = r82xx_bitrev(p[i]);
+
+	return 0;
+}
+
+/*
+ * r82xx tuning logic
+ */
+
+static int r82xx_set_mux(struct r82xx_priv *priv, uint32_t freq)
+{
+	const struct r82xx_freq_range *range;
+	int rc;
+	unsigned int i;
+	uint8_t val;
+
+	/* Get the proper frequency range */
+	freq = freq / 1000000;
+	for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) {
+		if (freq < freq_ranges[i + 1].freq)
+			break;
+	}
+	range = &freq_ranges[i];
+
+	/* Open Drain */
+	rc = r82xx_write_reg_mask(priv, 0x17, range->open_d, 0x08);
+	if (rc < 0)
+		return rc;
+
+	/* RF_MUX,Polymux */
+	rc = r82xx_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3);
+	if (rc < 0)
+		return rc;
+
+	/* TF BAND */
+	rc = r82xx_write_reg(priv, 0x1b, range->tf_c);
+	if (rc < 0)
+		return rc;
+
+	/* XTAL CAP & Drive */
+	switch (priv->xtal_cap_sel) {
+	case XTAL_LOW_CAP_30P:
+	case XTAL_LOW_CAP_20P:
+		val = range->xtal_cap20p | 0x08;
+		break;
+	case XTAL_LOW_CAP_10P:
+		val = range->xtal_cap10p | 0x08;
+		break;
+	case XTAL_HIGH_CAP_0P:
+		val = range->xtal_cap0p | 0x00;
+		break;
+	default:
+	case XTAL_LOW_CAP_0P:
+		val = range->xtal_cap0p | 0x08;
+		break;
+	}
+	rc = r82xx_write_reg_mask(priv, 0x10, val, 0x0b);
+	if (rc < 0)
+		return rc;
+
+	rc = r82xx_write_reg_mask(priv, 0x08, 0x00, 0x3f);
+	if (rc < 0)
+		return rc;
+
+	rc = r82xx_write_reg_mask(priv, 0x09, 0x00, 0x3f);
+
+	return rc;
+}
+
+static int r82xx_set_pll(struct r82xx_priv *priv, uint32_t freq)
+{
+	int rc, i;
+	unsigned sleep_time = 10000;
+	uint64_t vco_freq;
+	uint32_t vco_fra;	/* VCO contribution by SDM (kHz) */
+	uint32_t vco_min = 1770000;
+	uint32_t vco_max = vco_min * 2;
+	uint32_t freq_khz, pll_ref, pll_ref_khz;
+	uint16_t n_sdm = 2;
+	uint16_t sdm = 0;
+	uint8_t mix_div = 2;
+	uint8_t div_buf = 0;
+	uint8_t div_num = 0;
+	uint8_t vco_power_ref = 2;
+	uint8_t refdiv2 = 0;
+	uint8_t ni, si, nint, vco_fine_tune, val;
+	uint8_t data[5];
+
+	/* Frequency in kHz */
+	freq_khz = (freq + 500) / 1000;
+	pll_ref = priv->cfg->xtal;
+	pll_ref_khz = (priv->cfg->xtal + 500) / 1000;
+
+	rc = r82xx_write_reg_mask(priv, 0x10, refdiv2, 0x10);
+	if (rc < 0)
+		return rc;
+
+	/* set pll autotune = 128kHz */
+	rc = r82xx_write_reg_mask(priv, 0x1a, 0x00, 0x0c);
+	if (rc < 0)
+		return rc;
+
+	/* set VCO current = 100 */
+	rc = r82xx_write_reg_mask(priv, 0x12, 0x80, 0xe0);
+	if (rc < 0)
+		return rc;
+
+	/* Calculate divider */
+	while (mix_div <= 64) {
+		if (((freq_khz * mix_div) >= vco_min) &&
+		   ((freq_khz * mix_div) < vco_max)) {
+			div_buf = mix_div;
+			while (div_buf > 2) {
+				div_buf = div_buf >> 1;
+				div_num++;
+			}
+			break;
+		}
+		mix_div = mix_div << 1;
+	}
+
+	rc = r82xx_read(priv, 0x00, data, sizeof(data));
+	if (rc < 0)
+		return rc;
+
+	if (priv->cfg->rafael_chip == CHIP_R828D)
+		vco_power_ref = 1;
+
+	vco_fine_tune = (data[4] & 0x30) >> 4;
+
+	if (vco_fine_tune > vco_power_ref)
+		div_num = div_num - 1;
+	else if (vco_fine_tune < vco_power_ref)
+		div_num = div_num + 1;
+
+	rc = r82xx_write_reg_mask(priv, 0x10, div_num << 5, 0xe0);
+	if (rc < 0)
+		return rc;
+
+	vco_freq = (uint64_t)freq * (uint64_t)mix_div;
+	nint = vco_freq / (2 * pll_ref);
+	vco_fra = (vco_freq - 2 * pll_ref * nint) / 1000;
+
+	if (nint > ((128 / vco_power_ref) - 1)) {
+		fprintf(stderr, "[R82XX] No valid PLL values for %u Hz!\n", freq);
+		return -1;
+	}
+
+	ni = (nint - 13) / 4;
+	si = nint - 4 * ni - 13;
+
+	rc = r82xx_write_reg(priv, 0x14, ni + (si << 6));
+	if (rc < 0)
+		return rc;
+
+	/* pw_sdm */
+	if (!vco_fra)
+		val = 0x08;
+	else
+		val = 0x00;
+
+	rc = r82xx_write_reg_mask(priv, 0x12, val, 0x08);
+	if (rc < 0)
+		return rc;
+
+	/* sdm calculator */
+	while (vco_fra > 1) {
+		if (vco_fra > (2 * pll_ref_khz / n_sdm)) {
+			sdm = sdm + 32768 / (n_sdm / 2);
+			vco_fra = vco_fra - 2 * pll_ref_khz / n_sdm;
+			if (n_sdm >= 0x8000)
+				break;
+		}
+		n_sdm <<= 1;
+	}
+
+	rc = r82xx_write_reg(priv, 0x16, sdm >> 8);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x15, sdm & 0xff);
+	if (rc < 0)
+		return rc;
+
+	for (i = 0; i < 2; i++) {
+//		usleep_range(sleep_time, sleep_time + 1000);
+
+		/* Check if PLL has locked */
+		rc = r82xx_read(priv, 0x00, data, 3);
+		if (rc < 0)
+			return rc;
+		if (data[2] & 0x40)
+			break;
+
+		if (!i) {
+			/* Didn't lock. Increase VCO current */
+			rc = r82xx_write_reg_mask(priv, 0x12, 0x60, 0xe0);
+			if (rc < 0)
+				return rc;
+		}
+	}
+
+	if (!(data[2] & 0x40)) {
+		fprintf(stderr, "[R82XX] PLL not locked!\n");
+		priv->has_lock = 0;
+		return 0;
+	}
+
+	priv->has_lock = 1;
+
+	/* set pll autotune = 8kHz */
+	rc = r82xx_write_reg_mask(priv, 0x1a, 0x08, 0x08);
+
+	return rc;
+}
+
+static int r82xx_sysfreq_sel(struct r82xx_priv *priv, uint32_t freq,
+			     enum r82xx_tuner_type type,
+			     uint32_t delsys)
+{
+	int rc;
+	uint8_t mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l;
+	uint8_t air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur;
+
+	switch (delsys) {
+	case SYS_DVBT:
+		if ((freq == 506000000) || (freq == 666000000) ||
+		   (freq == 818000000)) {
+			mixer_top = 0x14;	/* mixer top:14 , top-1, low-discharge */
+			lna_top = 0xe5;		/* detect bw 3, lna top:4, predet top:2 */
+			cp_cur = 0x28;		/* 101, 0.2 */
+			div_buf_cur = 0x20;	/* 10, 200u */
+		} else {
+			mixer_top = 0x24;	/* mixer top:13 , top-1, low-discharge */
+			lna_top = 0xe5;		/* detect bw 3, lna top:4, predet top:2 */
+			cp_cur = 0x38;		/* 111, auto */
+			div_buf_cur = 0x30;	/* 11, 150u */
+		}
+		lna_vth_l = 0x53;		/* lna vth 0.84	,  vtl 0.64 */
+		mixer_vth_l = 0x75;		/* mixer vth 1.04, vtl 0.84 */
+		air_cable1_in = 0x00;
+		cable2_in = 0x00;
+		pre_dect = 0x40;
+		lna_discharge = 14;
+		filter_cur = 0x40;		/* 10, low */
+		break;
+	case SYS_DVBT2:
+		mixer_top = 0x24;	/* mixer top:13 , top-1, low-discharge */
+		lna_top = 0xe5;		/* detect bw 3, lna top:4, predet top:2 */
+		lna_vth_l = 0x53;	/* lna vth 0.84	,  vtl 0.64 */
+		mixer_vth_l = 0x75;	/* mixer vth 1.04, vtl 0.84 */
+		air_cable1_in = 0x00;
+		cable2_in = 0x00;
+		pre_dect = 0x40;
+		lna_discharge = 14;
+		cp_cur = 0x38;		/* 111, auto */
+		div_buf_cur = 0x30;	/* 11, 150u */
+		filter_cur = 0x40;	/* 10, low */
+		break;
+	case SYS_ISDBT:
+		mixer_top = 0x24;	/* mixer top:13 , top-1, low-discharge */
+		lna_top = 0xe5;		/* detect bw 3, lna top:4, predet top:2 */
+		lna_vth_l = 0x75;	/* lna vth 1.04	,  vtl 0.84 */
+		mixer_vth_l = 0x75;	/* mixer vth 1.04, vtl 0.84 */
+		air_cable1_in = 0x00;
+		cable2_in = 0x00;
+		pre_dect = 0x40;
+		lna_discharge = 14;
+		cp_cur = 0x38;		/* 111, auto */
+		div_buf_cur = 0x30;	/* 11, 150u */
+		filter_cur = 0x40;	/* 10, low */
+		break;
+	default: /* DVB-T 8M */
+		mixer_top = 0x24;	/* mixer top:13 , top-1, low-discharge */
+		lna_top = 0xe5;		/* detect bw 3, lna top:4, predet top:2 */
+		lna_vth_l = 0x53;	/* lna vth 0.84	,  vtl 0.64 */
+		mixer_vth_l = 0x75;	/* mixer vth 1.04, vtl 0.84 */
+		air_cable1_in = 0x00;
+		cable2_in = 0x00;
+		pre_dect = 0x40;
+		lna_discharge = 14;
+		cp_cur = 0x38;		/* 111, auto */
+		div_buf_cur = 0x30;	/* 11, 150u */
+		filter_cur = 0x40;	/* 10, low */
+		break;
+	}
+
+	if (priv->cfg->use_predetect) {
+		rc = r82xx_write_reg_mask(priv, 0x06, pre_dect, 0x40);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = r82xx_write_reg_mask(priv, 0x1d, lna_top, 0xc7);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg_mask(priv, 0x1c, mixer_top, 0xf8);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x0d, lna_vth_l);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x0e, mixer_vth_l);
+	if (rc < 0)
+		return rc;
+
+	priv->input = air_cable1_in;
+
+	/* Air-IN only for Astrometa */
+	rc = r82xx_write_reg_mask(priv, 0x05, air_cable1_in, 0x60);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg_mask(priv, 0x06, cable2_in, 0x08);
+	if (rc < 0)
+		return rc;
+
+	rc = r82xx_write_reg_mask(priv, 0x11, cp_cur, 0x38);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg_mask(priv, 0x17, div_buf_cur, 0x30);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg_mask(priv, 0x0a, filter_cur, 0x60);
+	if (rc < 0)
+		return rc;
+
+	/*
+	 * Set LNA
+	 */
+
+	if (type != TUNER_ANALOG_TV) {
+		/* LNA TOP: lowest */
+		rc = r82xx_write_reg_mask(priv, 0x1d, 0, 0x38);
+		if (rc < 0)
+			return rc;
+
+		/* 0: normal mode */
+		rc = r82xx_write_reg_mask(priv, 0x1c, 0, 0x04);
+		if (rc < 0)
+			return rc;
+
+		/* 0: PRE_DECT off */
+		rc = r82xx_write_reg_mask(priv, 0x06, 0, 0x40);
+		if (rc < 0)
+			return rc;
+
+		/* agc clk 250hz */
+		rc = r82xx_write_reg_mask(priv, 0x1a, 0x30, 0x30);
+		if (rc < 0)
+			return rc;
+
+//		msleep(250);
+
+		/* write LNA TOP = 3 */
+		rc = r82xx_write_reg_mask(priv, 0x1d, 0x18, 0x38);
+		if (rc < 0)
+			return rc;
+
+		/*
+		 * write discharge mode
+		 * FIXME: IMHO, the mask here is wrong, but it matches
+		 * what's there at the original driver
+		 */
+		rc = r82xx_write_reg_mask(priv, 0x1c, mixer_top, 0x04);
+		if (rc < 0)
+			return rc;
+
+		/* LNA discharge current */
+		rc = r82xx_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f);
+		if (rc < 0)
+			return rc;
+
+		/* agc clk 60hz */
+		rc = r82xx_write_reg_mask(priv, 0x1a, 0x20, 0x30);
+		if (rc < 0)
+			return rc;
+	} else {
+		/* PRE_DECT off */
+		rc = r82xx_write_reg_mask(priv, 0x06, 0, 0x40);
+		if (rc < 0)
+			return rc;
+
+		/* write LNA TOP */
+		rc = r82xx_write_reg_mask(priv, 0x1d, lna_top, 0x38);
+		if (rc < 0)
+			return rc;
+
+		/*
+		 * write discharge mode
+		 * FIXME: IMHO, the mask here is wrong, but it matches
+		 * what's there at the original driver
+		 */
+		rc = r82xx_write_reg_mask(priv, 0x1c, mixer_top, 0x04);
+		if (rc < 0)
+			return rc;
+
+		/* LNA discharge current */
+		rc = r82xx_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f);
+		if (rc < 0)
+			return rc;
+
+		/* agc clk 1Khz, external det1 cap 1u */
+		rc = r82xx_write_reg_mask(priv, 0x1a, 0x00, 0x30);
+		if (rc < 0)
+			return rc;
+
+		rc = r82xx_write_reg_mask(priv, 0x10, 0x00, 0x04);
+		if (rc < 0)
+			return rc;
+	 }
+	 return 0;
+}
+
+static int r82xx_set_tv_standard(struct r82xx_priv *priv,
+				 unsigned bw,
+				 enum r82xx_tuner_type type,
+				 uint32_t delsys)
+
+{
+	int rc, i;
+	uint32_t if_khz, filt_cal_lo;
+	uint8_t data[5];
+	uint8_t filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through;
+	uint8_t lt_att, flt_ext_widest, polyfil_cur;
+	int need_calibration;
+
+	/* BW < 6 MHz */
+	if_khz = 3570;
+	filt_cal_lo = 56000;	/* 52000->56000 */
+	filt_gain = 0x10;	/* +3db, 6mhz on */
+	img_r = 0x00;		/* image negative */
+	filt_q = 0x10;		/* r10[4]:low q(1'b1) */
+	hp_cor = 0x6b;		/* 1.7m disable, +2cap, 1.0mhz */
+	ext_enable = 0x60;	/* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
+	loop_through = 0x01;	/* r5[7], lt off */
+	lt_att = 0x00;		/* r31[7], lt att enable */
+	flt_ext_widest = 0x00;	/* r15[7]: flt_ext_wide off */
+	polyfil_cur = 0x60;	/* r25[6:5]:min */
+
+	/* Initialize the shadow registers */
+	memcpy(priv->regs, r82xx_init_array, sizeof(r82xx_init_array));
+
+	/* Init Flag & Xtal_check Result (inits VGA gain, needed?)*/
+	rc = r82xx_write_reg_mask(priv, 0x0c, 0x00, 0x0f);
+	if (rc < 0)
+		return rc;
+
+	/* version */
+	rc = r82xx_write_reg_mask(priv, 0x13, VER_NUM, 0x3f);
+	if (rc < 0)
+		return rc;
+
+	/* for LT Gain test */
+	if (type != TUNER_ANALOG_TV) {
+		rc = r82xx_write_reg_mask(priv, 0x1d, 0x00, 0x38);
+		if (rc < 0)
+			return rc;
+//		usleep_range(1000, 2000);
+	}
+	priv->int_freq = if_khz * 1000;
+
+	/* Check if standard changed. If so, filter calibration is needed */
+	/* as we call this function only once in rtlsdr, force calibration */
+	need_calibration = 1;
+
+	if (need_calibration) {
+		for (i = 0; i < 2; i++) {
+			/* Set filt_cap */
+			rc = r82xx_write_reg_mask(priv, 0x0b, hp_cor, 0x60);
+			if (rc < 0)
+				return rc;
+
+			/* set cali clk =on */
+			rc = r82xx_write_reg_mask(priv, 0x0f, 0x04, 0x04);
+			if (rc < 0)
+				return rc;
+
+			/* X'tal cap 0pF for PLL */
+			rc = r82xx_write_reg_mask(priv, 0x10, 0x00, 0x03);
+			if (rc < 0)
+				return rc;
+
+			rc = r82xx_set_pll(priv, filt_cal_lo * 1000);
+			if (rc < 0 || !priv->has_lock)
+				return rc;
+
+			/* Start Trigger */
+			rc = r82xx_write_reg_mask(priv, 0x0b, 0x10, 0x10);
+			if (rc < 0)
+				return rc;
+
+//			usleep_range(1000, 2000);
+
+			/* Stop Trigger */
+			rc = r82xx_write_reg_mask(priv, 0x0b, 0x00, 0x10);
+			if (rc < 0)
+				return rc;
+
+			/* set cali clk =off */
+			rc = r82xx_write_reg_mask(priv, 0x0f, 0x00, 0x04);
+			if (rc < 0)
+				return rc;
+
+			/* Check if calibration worked */
+			rc = r82xx_read(priv, 0x00, data, sizeof(data));
+			if (rc < 0)
+				return rc;
+
+			priv->fil_cal_code = data[4] & 0x0f;
+			if (priv->fil_cal_code && priv->fil_cal_code != 0x0f)
+				break;
+		}
+		/* narrowest */
+		if (priv->fil_cal_code == 0x0f)
+			priv->fil_cal_code = 0;
+	}
+
+	rc = r82xx_write_reg_mask(priv, 0x0a,
+				  filt_q | priv->fil_cal_code, 0x1f);
+	if (rc < 0)
+		return rc;
+
+	/* Set BW, Filter_gain, & HP corner */
+	rc = r82xx_write_reg_mask(priv, 0x0b, hp_cor, 0xef);
+	if (rc < 0)
+		return rc;
+
+	/* Set Img_R */
+	rc = r82xx_write_reg_mask(priv, 0x07, img_r, 0x80);
+	if (rc < 0)
+		return rc;
+
+	/* Set filt_3dB, V6MHz */
+	rc = r82xx_write_reg_mask(priv, 0x06, filt_gain, 0x30);
+	if (rc < 0)
+		return rc;
+
+	/* channel filter extension */
+	rc = r82xx_write_reg_mask(priv, 0x1e, ext_enable, 0x60);
+	if (rc < 0)
+		return rc;
+
+	/* Loop through */
+	rc = r82xx_write_reg_mask(priv, 0x05, loop_through, 0x80);
+	if (rc < 0)
+		return rc;
+
+	/* Loop through attenuation */
+	rc = r82xx_write_reg_mask(priv, 0x1f, lt_att, 0x80);
+	if (rc < 0)
+		return rc;
+
+	/* filter extension widest */
+	rc = r82xx_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80);
+	if (rc < 0)
+		return rc;
+
+	/* RF poly filter current */
+	rc = r82xx_write_reg_mask(priv, 0x19, polyfil_cur, 0x60);
+	if (rc < 0)
+		return rc;
+
+	/* Store current standard. If it changes, re-calibrate the tuner */
+	priv->delsys = delsys;
+	priv->type = type;
+	priv->bw = bw;
+
+	return 0;
+}
+
+static int r82xx_read_gain(struct r82xx_priv *priv)
+{
+	uint8_t data[4];
+	int rc;
+
+	rc = r82xx_read(priv, 0x00, data, sizeof(data));
+	if (rc < 0)
+		return rc;
+
+	return ((data[3] & 0x0f) << 1) + ((data[3] & 0xf0) >> 4);
+}
+
+/* measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm
+ * input power, for raw results see:
+ * http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/
+ */
+
+#define VGA_BASE_GAIN	-47
+static const int r82xx_vga_gain_steps[]  = {
+	0, 26, 26, 30, 42, 35, 24, 13, 14, 32, 36, 34, 35, 37, 35, 36
+};
+
+static const int r82xx_lna_gain_steps[]  = {
+	0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13
+};
+
+static const int r82xx_mixer_gain_steps[]  = {
+	0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8
+};
+
+int r82xx_set_gain(struct r82xx_priv *priv, int set_manual_gain, int gain)
+{
+	int rc;
+
+	if (set_manual_gain) {
+		int i, total_gain = 0;
+		uint8_t mix_index = 0, lna_index = 0;
+		uint8_t data[4];
+
+		/* LNA auto off */
+		rc = r82xx_write_reg_mask(priv, 0x05, 0x10, 0x10);
+		if (rc < 0)
+			return rc;
+
+		 /* Mixer auto off */
+		rc = r82xx_write_reg_mask(priv, 0x07, 0, 0x10);
+		if (rc < 0)
+			return rc;
+
+		rc = r82xx_read(priv, 0x00, data, sizeof(data));
+		if (rc < 0)
+			return rc;
+
+		/* set fixed VGA gain for now (16.3 dB) */
+		rc = r82xx_write_reg_mask(priv, 0x0c, 0x08, 0x9f);
+		if (rc < 0)
+			return rc;
+
+		for (i = 0; i < 15; i++) {
+			if (total_gain >= gain)
+				break;
+
+			total_gain += r82xx_lna_gain_steps[++lna_index];
+
+			if (total_gain >= gain)
+				break;
+
+			total_gain += r82xx_mixer_gain_steps[++mix_index];
+		}
+
+		/* set LNA gain */
+		rc = r82xx_write_reg_mask(priv, 0x05, lna_index, 0x0f);
+		if (rc < 0)
+			return rc;
+
+		/* set Mixer gain */
+		rc = r82xx_write_reg_mask(priv, 0x07, mix_index, 0x0f);
+		if (rc < 0)
+			return rc;
+	} else {
+		/* LNA */
+		rc = r82xx_write_reg_mask(priv, 0x05, 0, 0x10);
+		if (rc < 0)
+			return rc;
+
+		/* Mixer */
+		rc = r82xx_write_reg_mask(priv, 0x07, 0x10, 0x10);
+		if (rc < 0)
+			return rc;
+
+		/* set fixed VGA gain for now (26.5 dB) */
+		rc = r82xx_write_reg_mask(priv, 0x0c, 0x0b, 0x9f);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+/* Bandwidth contribution by low-pass filter. */
+static const int r82xx_if_low_pass_bw_table[] = {
+	1700000, 1600000, 1550000, 1450000, 1200000, 900000, 700000, 550000, 450000, 350000
+};
+
+#define FILT_HP_BW1 350000
+#define FILT_HP_BW2 380000
+int r82xx_set_bandwidth(struct r82xx_priv *priv, int bw, uint32_t rate)
+{
+	int rc;
+	unsigned int i;
+	int real_bw = 0;
+	uint8_t reg_0a;
+	uint8_t reg_0b;
+
+	if (bw > 7000000) {
+		// BW: 8 MHz
+		reg_0a = 0x10;
+		reg_0b = 0x0b;
+		priv->int_freq = 4570000;
+	} else if (bw > 6000000) {
+		// BW: 7 MHz
+		reg_0a = 0x10;
+		reg_0b = 0x2a;
+		priv->int_freq = 4570000;
+	} else if (bw > r82xx_if_low_pass_bw_table[0] + FILT_HP_BW1 + FILT_HP_BW2) {
+		// BW: 6 MHz
+		reg_0a = 0x10;
+		reg_0b = 0x6b;
+		priv->int_freq = 3570000;
+	} else {
+		reg_0a = 0x00;
+		reg_0b = 0x80;
+		priv->int_freq = 2300000;
+
+		if (bw > r82xx_if_low_pass_bw_table[0] + FILT_HP_BW1) {
+			bw -= FILT_HP_BW2;
+			priv->int_freq += FILT_HP_BW2;
+			real_bw += FILT_HP_BW2;
+		} else {
+			reg_0b |= 0x20;
+		}
+
+		if (bw > r82xx_if_low_pass_bw_table[0]) {
+			bw -= FILT_HP_BW1;
+			priv->int_freq += FILT_HP_BW1;
+			real_bw += FILT_HP_BW1;
+		} else {
+			reg_0b |= 0x40;
+		}
+
+		// find low-pass filter
+		for(i = 0; i < ARRAY_SIZE(r82xx_if_low_pass_bw_table); ++i) {
+			if (bw > r82xx_if_low_pass_bw_table[i])
+				break;
+		}
+		--i;
+		reg_0b |= 15 - i;
+		real_bw += r82xx_if_low_pass_bw_table[i];
+
+		priv->int_freq -= real_bw / 2;
+	}
+
+	rc = r82xx_write_reg_mask(priv, 0x0a, reg_0a, 0x10);
+	if (rc < 0)
+		return rc;
+
+	rc = r82xx_write_reg_mask(priv, 0x0b, reg_0b, 0xef);
+	if (rc < 0)
+		return rc;
+
+	return priv->int_freq;
+}
+#undef FILT_HP_BW1
+#undef FILT_HP_BW2
+
+int r82xx_set_freq(struct r82xx_priv *priv, uint32_t freq)
+{
+	int rc = -1;
+	uint32_t lo_freq = freq + priv->int_freq;
+	uint8_t air_cable1_in;
+
+	rc = r82xx_set_mux(priv, lo_freq);
+	if (rc < 0)
+		goto err;
+
+	rc = r82xx_set_pll(priv, lo_freq);
+	if (rc < 0 || !priv->has_lock)
+		goto err;
+
+	/* switch between 'Cable1' and 'Air-In' inputs on sticks with
+	 * R828D tuner. We switch at 345 MHz, because that's where the
+	 * noise-floor has about the same level with identical LNA
+	 * settings. The original driver used 320 MHz. */
+	air_cable1_in = (freq > MHZ(345)) ? 0x00 : 0x60;
+
+	if ((priv->cfg->rafael_chip == CHIP_R828D) &&
+	    (air_cable1_in != priv->input)) {
+		priv->input = air_cable1_in;
+		rc = r82xx_write_reg_mask(priv, 0x05, air_cable1_in, 0x60);
+	}
+
+err:
+	if (rc < 0)
+		fprintf(stderr, "%s: failed=%d\n", __FUNCTION__, rc);
+	return rc;
+}
+
+/*
+ * r82xx standby logic
+ */
+
+int r82xx_standby(struct r82xx_priv *priv)
+{
+	int rc;
+
+	/* If device was not initialized yet, don't need to standby */
+	if (!priv->init_done)
+		return 0;
+
+	rc = r82xx_write_reg(priv, 0x06, 0xb1);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x05, 0xa0);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x07, 0x3a);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x08, 0x40);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x09, 0xc0);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x0a, 0x36);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x0c, 0x35);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x0f, 0x68);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x11, 0x03);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x17, 0xf4);
+	if (rc < 0)
+		return rc;
+	rc = r82xx_write_reg(priv, 0x19, 0x0c);
+
+	/* Force initial calibration */
+	priv->type = -1;
+
+	return rc;
+}
+
+/*
+ * r82xx device init logic
+ */
+
+static int r82xx_xtal_check(struct r82xx_priv *priv)
+{
+	int rc;
+	unsigned int i;
+	uint8_t data[3], val;
+
+	/* Initialize the shadow registers */
+	memcpy(priv->regs, r82xx_init_array, sizeof(r82xx_init_array));
+
+	/* cap 30pF & Drive Low */
+	rc = r82xx_write_reg_mask(priv, 0x10, 0x0b, 0x0b);
+	if (rc < 0)
+		return rc;
+
+	/* set pll autotune = 128kHz */
+	rc = r82xx_write_reg_mask(priv, 0x1a, 0x00, 0x0c);
+	if (rc < 0)
+		return rc;
+
+	/* set manual initial reg = 111111;  */
+	rc = r82xx_write_reg_mask(priv, 0x13, 0x7f, 0x7f);
+	if (rc < 0)
+		return rc;
+
+	/* set auto */
+	rc = r82xx_write_reg_mask(priv, 0x13, 0x00, 0x40);
+	if (rc < 0)
+		return rc;
+
+	/* Try several xtal capacitor alternatives */
+	for (i = 0; i < ARRAY_SIZE(r82xx_xtal_capacitor); i++) {
+		rc = r82xx_write_reg_mask(priv, 0x10,
+					  r82xx_xtal_capacitor[i][0], 0x1b);
+		if (rc < 0)
+			return rc;
+
+//		usleep_range(5000, 6000);
+
+		rc = r82xx_read(priv, 0x00, data, sizeof(data));
+		if (rc < 0)
+			return rc;
+		if (!(data[2] & 0x40))
+			continue;
+
+		val = data[2] & 0x3f;
+
+		if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23))
+			break;
+
+		if (val != 0x3f)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(r82xx_xtal_capacitor))
+		return -1;
+
+	return r82xx_xtal_capacitor[i][1];
+}
+
+int r82xx_init(struct r82xx_priv *priv)
+{
+	int rc;
+
+	/* TODO: R828D might need r82xx_xtal_check() */
+	priv->xtal_cap_sel = XTAL_HIGH_CAP_0P;
+
+	/* Initialize registers */
+	rc = r82xx_write(priv, 0x05,
+			 r82xx_init_array, sizeof(r82xx_init_array));
+
+	rc = r82xx_set_tv_standard(priv, 3, TUNER_DIGITAL_TV, 0);
+	if (rc < 0)
+		goto err;
+
+	rc = r82xx_sysfreq_sel(priv, 0, TUNER_DIGITAL_TV, SYS_DVBT);
+
+	priv->init_done = 1;
+
+err:
+	if (rc < 0)
+		fprintf(stderr, "%s: failed=%d\n", __FUNCTION__, rc);
+	return rc;
+}
+
+#if 0
+/* Not used, for now */
+static int r82xx_gpio(struct r82xx_priv *priv, int enable)
+{
+	return r82xx_write_reg_mask(priv, 0x0f, enable ? 1 : 0, 0x01);
+}
+#endif