Added samsung xe303c12 description

1 files changed, 129 insertions, 0 deletions

diff --git a/md/writeup/devices/samsung_xe303c12.md b/md/writeup/devices/samsung_xe303c12.md
new file mode 100644
index 0000000..10abdc3
--- /dev/null
+++ b/md/writeup/devices/samsung_xe303c12.md
@@ -0,0 +1,129 @@
+# SAMSUNG xe303c12
+
+## Hardware
+
+
+| Hardware | Model |
+| --- | --- |
+| CPU                     | Samsung Exynos 5250 AEON  | 
+| eMMC                    | SanDisk SDIN7DU2-16G NAND Flash |
+| RAM                     | DDR3L-1600 , 8xELPIDA J2108EDBG-GN-F (2Gbx8) |
+| Power Controller        | MAX 77686 EWE 1237 |
+| PMU                     | TPS65090 TI 291 |
+| Embeded Controler       | STM32F100R8 |
+| Trusted platform module | Infineon SLB9635 |
+| SPI Flash               | Winbond 25Q32DSWIG |
+| WiFi/Bluetooth          | Murata SS2907002 |
+| PCI clock               | PI6C557-03 |
+| Audio codec             | MAX98095 | 
+
+
+## Booting Linux
+
+_This is chapter copied from [Source](https://archlinuxarm.org/platforms/armv7/samsung/samsung-chromebook)_
+
+### Switch to developer mode
+
+1. Turn off the laptop.
+2. To invoke Recovery mode, you hold down the ESC and Refresh keys and poke the 
+Power button. 
+3. At the Recovery screen press Ctrl-D (there's no prompt - you have 
+to know to do it). 
+4. Confirm switching to developer mode by pressing enter, 
+and the laptop will reboot and reset the system. This takes about 15-20 minutes. 
+
+_Note:_ After enabling developer mode, you will need to press Ctrl-D each time 
+you boot, or wait 30 seconds to continue booting.
+
+### Enable booting from external storage
+
+1. After booting into developer mode, hold Ctrl and Alt and poke the T key. This will open up the crosh shell.
+2. Type shell to get into a bash shell.
+3. Type sudo su to become root.
+4. Then type this to enable USB booting:
+```
+    crossystem dev_boot_usb=1 dev_boot_signed_only=0
+```
+5. Reboot the system to allow the change to take effect. 
+
+### Create a root USB or SD for dual booting
+
+These instructions are written for installing to a USB drive with the sda device, assuming no other USB drives are plugged in. For an SD card, click here to magically adjust the instructions for the mmcblk1 device that an SD card will register as.
+
+1. Get a root shell as described in the previous section.
+2. Since ChromeOS will automatically mount any partitions it finds, unmount everything now:
+```
+umount /dev/sda*
+```
+3. Start fdisk to create a GPT partition table:
+```
+fdisk /dev/sda
+```
+4. At the fdisk prompt:  
+4.1. Type g. This will create a new empty GPT partition table.  
+4.2. Write the partition table and exit by typing w.  
+
+5. Partition the micro SD card:
+```
+    cgpt create /dev/sda
+    cgpt add -i 1 -t kernel -b 8192 -s 32768 -l Kernel -S 1 -T 5 -P 10 /dev/sda
+```
+6. To create the rootfs partition, we first need to calculate how big to make the partition using information from cgpt show. Look for the number under the start column for Sec GPT table which is 15633375 in this example:
+```
+    localhost / # cgpt show /dev/sda
+           start        size    part  contents
+               0           1          PMBR
+               1           1          Pri GPT header
+            8192       32768      1   Label: "Kernel"
+                                      Type: ChromeOS kernel
+                                      UUID: E3DA8325-83E1-2C43-BA9D-8B29EFFA5BC4
+                                      Attr: priority=10 tries=5 successful=1
+
+        15633375          32          Sec GPT table
+        15633407           1          Sec GPT header
+```
+7.  Replace the xxxxx string in the following command with that number to create the root partition:
+```
+cgpt add -i 2 -t data -b 40960 -s `expr xxxxx - 40960` -l Root /dev/sda
+```
+8. Tell the system to refresh what it knows about the disk partitions:
+```
+sfdisk -R /dev/sda
+```
+9. Format the root partition:
+```
+mkfs.ext4 /dev/sda2
+```
+10. Download and extract rootfs tarball:
+```
+cd /tmp
+wget http://archlinuxarm.org/os/ArchLinuxARM-peach-latest.tar.gz
+mkdir root
+mount /dev/sda2 root
+tar -xf ArchLinuxARM-peach-latest.tar.gz -C root
+```
+11. Flash the kernel to the kernel partition:
+```
+dd if=root/boot/vmlinux.kpart of=/dev/sda1
+```
+12. Unmount the root partition:
+```
+umount root
+sync
+```
+13. Reboot the computer.
+14. At the splash screen, instead of pressing Ctrl-D to go to CromeOS, press Ctrl-U to boot to the external drive.
+15. After logging in as root (password is "root"), you can connect to a wireless network by running:
+```
+wifi-menu
+```
+
+## Links
+
+1. https://archlinuxarm.org/platforms/armv7/samsung/samsung-chromebook
+2. https://www.ifixit.com/Teardown/Samsung+Chromebook+Series+3+Teardown/12225
+3. http://www.slideshare.net/jjwu6266/introducing-samsung-chromebookxe303
+4. http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00251732.pdf
+5. http://www.infineon.com/cms/en/about-infineon/press/press-releases/2009/INFCCS200912-015.htm
+6. https://www.pericom.com/assets/Datasheets/PI6C557-03.pdf
+7. https://datasheets.maximintegrated.com/en/ds/MAX98095.pdf
\ No newline at end of file