diff options
Diffstat (limited to 'python/py2')
| -rw-r--r-- | python/py2/Setup | 491 |
1 files changed, 491 insertions, 0 deletions
diff --git a/python/py2/Setup b/python/py2/Setup new file mode 100644 index 0000000..5f103b3 --- /dev/null +++ b/python/py2/Setup @@ -0,0 +1,491 @@ +# -*- makefile -*- +# The file Setup is used by the makesetup script to construct the files +# Makefile and config.c, from Makefile.pre and config.c.in, +# respectively. The file Setup itself is initially copied from +# Setup.dist; once it exists it will not be overwritten, so you can edit +# Setup to your heart's content. Note that Makefile.pre is created +# from Makefile.pre.in by the toplevel configure script. + +# (VPATH notes: Setup and Makefile.pre are in the build directory, as +# are Makefile and config.c; the *.in and *.dist files are in the source +# directory.) + +# Each line in this file describes one or more optional modules. +# Modules enabled here will not be compiled by the setup.py script, +# so the file can be used to override setup.py's behavior. + +# Lines have the following structure: +# +# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...] +# +# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files) +# <cpparg> is anything starting with -I, -D, -U or -C +# <library> is anything ending in .a or beginning with -l or -L +# <module> is anything else but should be a valid Python +# identifier (letters, digits, underscores, beginning with non-digit) +# +# (As the makesetup script changes, it may recognize some other +# arguments as well, e.g. *.so and *.sl as libraries. See the big +# case statement in the makesetup script.) +# +# Lines can also have the form +# +# <name> = <value> +# +# which defines a Make variable definition inserted into Makefile.in +# +# Finally, if a line contains just the word "*shared*" (without the +# quotes but with the stars), then the following modules will not be +# built statically. The build process works like this: +# +# 1. Build all modules that are declared as static in Modules/Setup, +# combine them into libpythonxy.a, combine that into python. +# 2. Build all modules that are listed as shared in Modules/Setup. +# 3. Invoke setup.py. That builds all modules that +# a) are not builtin, and +# b) are not listed in Modules/Setup, and +# c) can be build on the target +# +# Therefore, modules declared to be shared will not be +# included in the config.c file, nor in the list of objects to be +# added to the library archive, and their linker options won't be +# added to the linker options. Rules to create their .o files and +# their shared libraries will still be added to the Makefile, and +# their names will be collected in the Make variable SHAREDMODS. This +# is used to build modules as shared libraries. (They can be +# installed using "make sharedinstall", which is implied by the +# toplevel "make install" target.) (For compatibility, +# *noconfig* has the same effect as *shared*.) +# +# In addition, *static* explicitly declares the following modules to +# be static. Lines containing "*static*" and "*shared*" may thus +# alternate throughout this file. + +# NOTE: As a standard policy, as many modules as can be supported by a +# platform should be present. The distribution comes with all modules +# enabled that are supported by most platforms and don't require you +# to ftp sources from elsewhere. + + +# Some special rules to define PYTHONPATH. +# Edit the definitions below to indicate which options you are using. +# Don't add any whitespace or comments! + +# Directories where library files get installed. +# DESTLIB is for Python modules; MACHDESTLIB for shared libraries. +DESTLIB=$(LIBDEST) +MACHDESTLIB=$(BINLIBDEST) + +# NOTE: all the paths are now relative to the prefix that is computed +# at run time! + +# Standard path -- don't edit. +# No leading colon since this is the first entry. +# Empty since this is now just the runtime prefix. +DESTPATH= + +# Site specific path components -- should begin with : if non-empty +SITEPATH= + +# Standard path components for test modules +TESTPATH= + +# Path components for machine- or system-dependent modules and shared libraries +MACHDEPPATH=:$(PLATDIR) +EXTRAMACHDEPPATH= + +# Path component for the Tkinter-related modules +# The TKPATH variable is always enabled, to save you the effort. +TKPATH=:lib-tk + +# Path component for old modules. +OLDPATH=:lib-old + +COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)$(TKPATH)$(OLDPATH) +PYTHONPATH=$(COREPYTHONPATH) + + +# The modules listed here can't be built as shared libraries for +# various reasons; therefore they are listed here instead of in the +# normal order. + +# This only contains the minimal set of modules required to run the +# setup.py script in the root of the Python source tree. + +posix posixmodule.c # posix (UNIX) system calls +errno errnomodule.c # posix (UNIX) errno values +pwd pwdmodule.c # this is needed to find out the user's home dir + # if $HOME is not set +_sre _sre.c # Fredrik Lundh's new regular expressions +_codecs _codecsmodule.c # access to the builtin codecs and codec registry +_weakref _weakref.c # weak references + +# The zipimport module is always imported at startup. Having it as a +# builtin module avoids some bootstrapping problems and reduces overhead. +zipimport zipimport.c + +# The rest of the modules listed in this file are all commented out by +# default. Usually they can be detected and built as dynamically +# loaded modules by the new setup.py script added in Python 2.1. If +# you're on a platform that doesn't support dynamic loading, want to +# compile modules statically into the Python binary, or need to +# specify some odd set of compiler switches, you can uncomment the +# appropriate lines below. + +# ====================================================================== + +# The Python symtable module depends on .h files that setup.py doesn't track +_symtable symtablemodule.c + +# The SGI specific GL module: + +GLHACK=-Dclear=__GLclear +#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11 + +# Pure module. Cannot be linked dynamically. +# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE +#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE +#PURE_INCLS=-I/usr/local/include +#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs +#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS) + +# Uncommenting the following line tells makesetup that all following +# modules are to be built as shared libraries (see above for more +# detail; also note that *static* reverses this effect): +*static* +#*shared* + +# GNU readline. Unlike previous Python incarnations, GNU readline is +# now incorporated in an optional module, configured in the Setup file +# instead of by a configure script switch. You may have to insert a +# -L option pointing to the directory where libreadline.* lives, +# and you may have to change -ltermcap to -ltermlib or perhaps remove +# it, depending on your system -- see the GNU readline instructions. +# It's okay for this to be a shared library, too. + +#readline readline.c -lreadline -ltermcap + + +# Modules that should always be present (non UNIX dependent): + +array arraymodule.c # array objects +cmath cmathmodule.c _math.c # -lm # complex math library functions +math mathmodule.c _math.c # -lm # math library functions, e.g. sin() +_struct _struct.c # binary structure packing/unpacking +time timemodule.c # -lm # time operations and variables +operator operator.c # operator.add() and similar goodies +_testcapi _testcapimodule.c # Python C API test module +_random _randommodule.c # Random number generator +_collections _collectionsmodule.c # Container types +_heapq _heapqmodule.c # Heapq type +itertools itertoolsmodule.c # Functions creating iterators for efficient looping +strop stropmodule.c # String manipulations +_functools _functoolsmodule.c # Tools for working with functions and callable objects +_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator +#_pickle _pickle.c # pickle accelerator +datetime datetimemodule.c # date/time type +_bisect _bisectmodule.c # Bisection algorithms + +#unicodedata unicodedata.c # static Unicode character database + +# access to ISO C locale support +_locale _localemodule.c # -lintl + +# Standard I/O baseline +_io -I$(srcdir)/Modules/_io _io/bufferedio.c _io/bytesio.c _io/fileio.c _io/iobase.c _io/_iomodule.c _io/stringio.c _io/textio.c + + +# Modules with some UNIX dependencies -- on by default: +# (If you have a really backward UNIX, select and socket may not be +# supported...) + +fcntl fcntlmodule.c # fcntl(2) and ioctl(2) +#spwd spwdmodule.c # spwd(3) +#grp grpmodule.c # grp(3) +select selectmodule.c # select(2); not on ancient System V + +# Memory-mapped files (also works on Win32). +mmap mmapmodule.c + +# CSV file helper +#_csv _csv.c + +# Socket module helper for socket(2) +_socket socketmodule.c timemodule.c + +# Socket module helper for SSL support; you must comment out the other +# socket line above, and possibly edit the SSL variable: +#SSL=/usr/local/ssl +#_ssl _ssl.c \ +# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ +# -L$(SSL)/lib -lssl -lcrypto + +# The crypt module is now disabled by default because it breaks builds +# on many systems (where -lcrypt is needed), e.g. Linux (I believe). +# +# First, look at Setup.config; configure may have set this for you. + +#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems + + +# Some more UNIX dependent modules -- off by default, since these +# are not supported by all UNIX systems: + +#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere +termios termios.c # Steen Lumholt's termios module +#resource resource.c # Jeremy Hylton's rlimit interface + + +# Multimedia modules -- off by default. +# These don't work for 64-bit platforms!!! +# #993173 says audioop works on 64-bit platforms, though. +# These represent audio samples or images as strings: + +#audioop audioop.c # Operations on audio samples +#imageop imageop.c # Operations on images + + +# Note that the _md5 and _sha modules are normally only built if the +# system does not have the OpenSSL libs containing an optimized version. + +# The _md5 module implements the RSA Data Security, Inc. MD5 +# Message-Digest Algorithm, described in RFC 1321. The necessary files +# md5.c and md5.h are included here. + +_md5 md5module.c md5.c + + +# The _sha module implements the SHA checksum algorithms. +# (NIST's Secure Hash Algorithms.) +_sha shamodule.c +_sha256 sha256module.c +_sha512 sha512module.c + + +# SGI IRIX specific modules -- off by default. + +# These module work on any SGI machine: + +# *** gl must be enabled higher up in this file *** +#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager +#sgi sgimodule.c # sgi.nap() and a few more + +# This module requires the header file +# /usr/people/4Dgifts/iristools/include/izoom.h: +#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities + + +# These modules require the Multimedia Development Option (I think): + +#al almodule.c -laudio # Audio Library +#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library +#cl clmodule.c -lcl -lawareaudio # Compression Library +#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video + + +# The FORMS library, by Mark Overmars, implements user interface +# components such as dialogs and buttons using SGI's GL and FM +# libraries. You must ftp the FORMS library separately from +# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. +# NOTE: if you want to be able to use FORMS and curses simultaneously +# (or both link them statically into the same binary), you must +# compile all of FORMS with the cc option "-Dclear=__GLclear". + +# The FORMS variable must point to the FORMS subdirectory of the forms +# toplevel directory: + +#FORMS=/ufs/guido/src/forms/FORMS +#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl + + +# SunOS specific modules -- off by default: + +#sunaudiodev sunaudiodev.c + + +# A Linux specific module -- off by default; this may also work on +# some *BSDs. + +#linuxaudiodev linuxaudiodev.c + + +# George Neville-Neil's timing module: + +#timing timingmodule.c + + +# The _tkinter module. +# +# The command for _tkinter is long and site specific. Please +# uncomment and/or edit those parts as indicated. If you don't have a +# specific extension (e.g. Tix or BLT), leave the corresponding line +# commented out. (Leave the trailing backslashes in! If you +# experience strange errors, you may want to join all uncommented +# lines and remove the backslashes -- the backslash interpretation is +# done by the shell's "read" command and it may not be implemented on +# every system. + +# *** Always uncomment this (leave the leading underscore in!): +# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \ +# *** Uncomment and edit to reflect where your Tcl/Tk libraries are: +# -L/usr/local/lib \ +# *** Uncomment and edit to reflect where your Tcl/Tk headers are: +# -I/usr/local/include \ +# *** Uncomment and edit to reflect where your X11 header files are: +# -I/usr/X11R6/include \ +# *** Or uncomment this for Solaris: +# -I/usr/openwin/include \ +# *** Uncomment and edit for Tix extension only: +# -DWITH_TIX -ltix8.1.8.2 \ +# *** Uncomment and edit for BLT extension only: +# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \ +# *** Uncomment and edit for PIL (TkImaging) extension only: +# (See http://www.pythonware.com/products/pil/ for more info) +# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \ +# *** Uncomment and edit for TOGL extension only: +# -DWITH_TOGL togl.c \ +# *** Uncomment and edit to reflect your Tcl/Tk versions: +# -ltk8.2 -ltcl8.2 \ +# *** Uncomment and edit to reflect where your X11 libraries are: +# -L/usr/X11R6/lib \ +# *** Or uncomment this for Solaris: +# -L/usr/openwin/lib \ +# *** Uncomment these for TOGL extension only: +# -lGL -lGLU -lXext -lXmu \ +# *** Uncomment for AIX: +# -lld \ +# *** Always uncomment this; X11 libraries to link with: +# -lX11 + +# Lance Ellinghaus's syslog module +#syslog syslogmodule.c # syslog daemon interface + + +# Curses support, requring the System V version of curses, often +# provided by the ncurses library. e.g. on Linux, link with -lncurses +# instead of -lcurses). +# +# First, look at Setup.config; configure may have set this for you. + +#_curses _cursesmodule.c -lcurses -ltermcap +# Wrapper for the panel library that's part of ncurses and SYSV curses. +#_curses_panel _curses_panel.c -lpanel -lncurses + + +# Generic (SunOS / SVR4) dynamic loading module. +# This is not needed for dynamic loading of Python modules -- +# it is a highly experimental and dangerous device for calling +# *arbitrary* C functions in *arbitrary* shared libraries: + +dl dlmodule.c + + +# Modules that provide persistent dictionary-like semantics. You will +# probably want to arrange for at least one of them to be available on +# your machine, though none are defined by default because of library +# dependencies. The Python module anydbm.py provides an +# implementation independent wrapper for these; dumbdbm.py provides +# similar functionality (but slower of course) implemented in Python. + +# The standard Unix dbm module has been moved to Setup.config so that +# it will be compiled as a shared library by default. Compiling it as +# a built-in module causes conflicts with the pybsddb3 module since it +# creates a static dependency on an out-of-date version of db.so. +# +# First, look at Setup.config; configure may have set this for you. + +#dbm dbmmodule.c # dbm(3) may require -lndbm or similar + +# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm: +# +# First, look at Setup.config; configure may have set this for you. + +#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm + + +# Sleepycat Berkeley DB interface. +# +# This requires the Sleepycat DB code, see http://www.sleepycat.com/ +# The earliest supported version of that library is 3.0, the latest +# supported version is 4.0 (4.1 is specifically not supported, as that +# changes the semantics of transactional databases). A list of available +# releases can be found at +# +# http://www.sleepycat.com/update/index.html +# +# Edit the variables DB and DBLIBVERto point to the db top directory +# and the subdirectory of PORT where you built it. +#DB=/usr/local/BerkeleyDB.4.0 +#DBLIBVER=4.0 +#DBINC=$(DB)/include +#DBLIB=$(DB)/lib +#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER) + +# Historical Berkeley DB 1.85 +# +# This module is deprecated; the 1.85 version of the Berkeley DB library has +# bugs that can cause data corruption. If you can, use later versions of the +# library instead, available from <http://www.sleepycat.com/>. + +#DB=/depot/sundry/src/berkeley-db/db.1.85 +#DBPORT=$(DB)/PORT/irix.5.3 +#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a + + + +# Helper module for various ascii-encoders +binascii binascii.c + +# Fred Drake's interface to the Python parser +parser parsermodule.c + +# cStringIO and cPickle +cStringIO cStringIO.c +cPickle cPickle.c + + +# Lee Busby's SIGFPE modules. +# The library to link fpectl with is platform specific. +# Choose *one* of the options below for fpectl: + +# For SGI IRIX (tested on 5.3): +#fpectl fpectlmodule.c -lfpe + +# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2): +# (Without the compiler you don't have -lsunmath.) +#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm + +# For other systems: see instructions in fpectlmodule.c. +#fpectl fpectlmodule.c ... + +# Test module for fpectl. No extra libraries needed. +#fpetest fpetestmodule.c + +# Andrew Kuchling's zlib module. +# This require zlib 1.1.3 (or later). +# See http://www.gzip.org/zlib/ +zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz + +# Interface to the Expat XML parser +# More information on Expat can be found at www.libexpat.org. +# +#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DXML_POOR_ENTROPY=1 -DUSE_PYEXPAT_CAPI + + +# Hye-Shik Chang's CJKCodecs + +# multibytecodec is required for all the other CJK codec modules +#_multibytecodec cjkcodecs/multibytecodec.c + +#_codecs_cn cjkcodecs/_codecs_cn.c +#_codecs_hk cjkcodecs/_codecs_hk.c +#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c +#_codecs_jp cjkcodecs/_codecs_jp.c +#_codecs_kr cjkcodecs/_codecs_kr.c +#_codecs_tw cjkcodecs/_codecs_tw.c + +# Example -- included for reference only: +# xx xxmodule.c + +# Another example -- the 'xxsubtype' module shows C-level subtyping in action +xxsubtype xxsubtype.c |